TEST PROCEDURES Except as noted below , all laboratory tests were standard and were performed in accordance with the procedures described in the Earth ... Earth Manual , except that the test is made on gravelly materials , the equipment ...
... tests should be such that the extent of the doubtful area is determined . All tests made in areas of doubtful density should be identified by the letter " D " on the ... EARTH MANUAL pacted fill controlled by Proctor test-- -Facing.
... earth mixtures. One can differentiate between simple field tests which can be carried out in situ and laboratory tests. An assessment of suitability should clarify the following questions: ▸. Is the earth mixture sufficiently cohesive ...
... tests Figure 16.24 shows a rock cylinder undergoing a point- load test . The UCS may be the ... Earth Materials : Components of a Diverse Planet 16.5.2 Point-load tests 16.5.3 Uniaxial tension strength tests 16.5.4 Brazilian test.
... tests listed above is discussed in greater detail in either the Design of Small Dams [ 16 ] or the Engineering Geology Field Manual ... EARTH MANUAL 2-21 Field Testing Methods a General b Field Permeability Tests In-Place Density Tests.
... test according to GRI - GG1 , GRI - GG2 , and ASTM D4595 test standards were performed . For each geogrid sample , 20 specimens were tested for GG1 and GG2 test methods , and 5 specimens were used for wide width tensile tests . For ...
... tests were made at each set - up , where relative audibility readings were taken and recorded . No amplification was used in these tests . Series 2. The second series of tests is divided into two parts - pre- liminary and final ...
... tests serve a useful purpose in identifying changes in the tensile characteristics of a given product , there is still some question regarding the validity of comparing tensile characteris- tics of different products on the basis of the ...
... tests need to be conducted on site and also in the laboratory. To sum up, the construction of deep excavation is greatly manipulated by the ... tests carried out on rock samples recovered 1.1 Geological Investigation and Soil Tests 3.
... tests: high current and 'no trip'. These tests may also be further broken down into three-lead or two-lead options. The high current test is the most ... earth fault loop impedance will need to be Testing 114 earth fault loop impedance.