How to Make Natural Dyes

Co-authored by Lois Wade

Last Updated: March 12, 2024 Approved

Download Article

Ever wonder how Great-great-grandma dyed the cloth for the family clothing? Perhaps you've been curious about "natural" colors and how to make them? Here is a primer to get you started with your own natural color experiments.

Steps

1. 1
   Collect your plant materials when they are at their peak of color. Flowers should be fresh, Berries should be very ripe, not withered.
2. 2
   Chop all plant materials into small pieces (inch or smaller) and place them into a large pot or pan that you are willing to sacrifice to the cloth dyeing craft. You will not be able to use it for cooking again.
3. 3
   Measure the amount of plant material and place twice as much water as plant material into the pot with the plant material.
4. 4
   Bring the mixture to a boil and then simmer it, stirring occasionally, for at least an hour.
5. 5
   Strain out the plant material and set the dye bath aside.
6. 6
   Place your fabric into a color fixative bath such as salt water (1 part salt to 16 parts water) or a vinegar bath (1 part vinegar to 4 parts water).
7. 7
   Allow the fabric to absorb the color fixative mix and simmer it for an hour.
8. 8
   Remove the fabric from the fixative and wring it out thoroughly.
9. 9
   Place the wet fabric into the dye mixture and simmer it until the desired color is achieved. The dry product will be lighter than the wet product, so go for a slightly darker color when wet.
10. 10
    Remove the fabric from the dye bath with rubber gloves. (You want to dye the cloth, not your hands.)
11. 11
    Wring the fabric thoroughly and hang it up to dry.
12. 12
    Launder naturally dyed fabrics in cold water and separate from other laundry.

Community Q&A

• Question

  Why can't you use the pot after dyeing?

  Community Answer

  If you use metals or acids in a dying process to extract brighter colors, these substances can leave a highly toxic residue that affects the integrity of the metal. The amount of salt and/or vinegar used for dying create chemical reactions that can change the toxicity level of something normally considered safe to ingest or cook with. A metal pot used for dying will degrade at a faster rate than one used solely for food, especially if it has a non-stick coating. Small particles could leach into your food and make you very, very sick, so it's better to be safe and dedicate one pot for dying and store it outside the kitchen so it's not used for cooking by mistake.
• Question

  What kind of berries or flowers do I use to dye the fabric?

  Community Answer

  You can use pretty much any berry, as long as it is fresh.
• Question

  Why do I need to keep the fabric in a salt water bath for an hour?

  Community Answer

  To loosen the fibers of the fabric and allow the dye to set in better. Natural fabrics, such as wool and cotton, work best.

See more answers

Video

Tips

• Some plant materials can be toxic, check with your poison control center if you are unsure.
• Natural fabrics such as cotton, linen, muslin and wool will take dye more readily than a synthetic material.
• See the link below for color charts... there are so many variations that it would be cumbersome to list them all here.

Warnings

• Dye of this type is generally NOT colorfast in warm water. Wash in cold water and separately from lighter colors.
• Do not drink dye colored water.

You Might Also Like

How to

Make PotpourriHow to Tie Dye a Shirt

How to

Prune a Rubber Plant

How to

Clean and Polish Seashells

How to

Drill a Hole in a Seashell (Without a Drill)How to Glue Rocks Together for Landscaping: The Best Glue to Use & MoreCrack, Clean, & Remove the Meat from a Coconut

How to

Blow a Conch ShellHow to Clean and Preserve an Animal Skull

How to

Dye Fabric with Beets

How to

Install Bamboo Screening

How to

Bend Bamboo

How to

Braid String

How to

Make Moss Graffiti