catamaran accessories - Columbus Sailing Club

2009 CATALOG 

800-786-7245 • www.murrays.com 

All prices and specifications are subject to change without notice

Dear Friends, 

Ready to hit the water? You probably already know 

that you could be more efficient, warmer and safer if you 

upgraded some of your equipment, apparel, and even your 

skills. We are here to serve you with the latest and greatest 

products, accessories and advice available. 

While the catalog focuses on beach catamaran, 

kiteboarding and wind surfing accessories, many of the 

products have cross-sport applications that may interest 

you or your friends. Please take some time and browse our 

entire catalog and you just might find a must-have item in 

an unexplored section. 

We understand that you can shop elsewhere for your 

sporting needs and that is why all of us at Murrays give our 

best effort to make sure you are completely satisfied with our 

products and services. You can rely on Murrays to provide 

the parts and accessories, service, and information you need. 

We promise to deliver expertise and value that cannot be 

found elsewhere. 

We appreciate your feedback and encourage you to 

drop us a line or an e-mail with your comments and photos. 

We enjoy meeting our customers in person, so be sure to 

drop by if you're in the area! 

Stephen, Douglas 

& Drayton Murray 

& Crew 

Many Thanks to Our Contributing Photographers & Riders 

Front Cover Photos: 

Catamaran: Tammy Karr – Adventure Online TV, Kelly Park River Regatta 

SUP: Murrays file photo 

Windsurfing: Bob Bohn, rider; courtesy of Streamlined 

Kiteboarding: Wes Mateweyew, rider; Jason Wolcott, photographer 

Back Cover Photos: 

Catamaran: Chuck Harnden – Adventure Online TV, Tybee 500- Cocoa Beach, FL 

29er: Courtesy of Craig Schifferns 

Kayak: Anthony Yap, rider, courtesy of Gul 

Kiteboarding: Murrays file photo 

Piñata Regatta 2008 

We stock almost 

all of what we 

sell, housing 

it in our 8,000 

square foot 

warehouse. 

OUR MISSION 

With the introduction in 1969 of a 

better traveler car for the Hobie® 

14, Murrays began its evolution 

into the one-stop, watersport mail 

order business that it is today. We 

are located in beautiful Carpinteria, 

California, a beach town midway 

between Ventura and Santa Barbara. 

With our temperate climate and the ocean nearby, we are 

fortunate to have a year-round playground where we can 

test the products we sell. 

Murrays is dedicated to the enhancement of watersports lifestyles 

by providing a single source of quality, proven and innovative parts 

and accessories, and by taking a personal interest in serving our 

customers, sharing knowledge and experiences that contribute to 

safe, enjoyable fun. 

MURRAYS POLICIES 

PRICES: In order to make the catalog easier to use, we have included prices in the body of the 

catalog. These prices are subject to change and do not include delivery. For latest information, 

call or check our website. For online orders, prices charged will be those in effect at our web 

store when your order is placed. 

TO PLACE AN ORDER: Order online at www.murrays.com or by fax or telephone, which are 

toll-free in the USA and Canada. We are here to answer your calls from 8:00am to 5:00pm 

Pacific time, Monday through Friday. 

SHIPPING & HANDLING: The charge for ground delivery in the USA of “standard size” packages 

is 5% of the amount of the order ($8.95 minimum). Expedited options are also available. 

Oversized items may incur an additional charge. Freight on foreign orders is calculated 

differently and is based on the shipping method. 

PAYMENT: Credit cards are most commonly used, but other options include check, money 

order or bank wire transfer. It is best to request a price quote prior to utilizing non-card 

methods to avoid over or under payments. 

BACKORDERS: Items that are temporarily out of stock will be backordered unless otherwise 

directed. Your card will be charged at time of shipment and the delivery will usually be free of 

additional delivery charges. 

RETURNS: Please contact Murrays for authorization prior to returning items. We appreciate 

items returned in complete, new condition. A restocking charge may apply in some instances. 

800-786-7245 www.murrays.com Prices & specifications are subject to change

Just a few of our over 

3,000 products… 

Gath Helmets 

See page 2-3 

Cordage 

See page 15 

Mainsheet 

Systems 

See pages 20-21 

Trampolines 

See page 34 

Beach Wheels 

See page 57 

NoLimitz Masts 

See page 67 

Streamlined 

Booms 

See page 67 

Kiteboard 

Straps & Pads 

See page 76 

SUP Paddles 

See page 80 

More new items are being added all the time at www.murrays.com 

CONTENTS 

CROSS-SPORT ACCESSORIES ................ 1-18 

Gath ® Headgear ...................................................................................2-3 

Instruments ..............................................................................................4 

Aquapacs ® .........................................................................................4-5 

Barz ® Optics ...........................................................................................6-7 

Wetsuit & Drysuit Care .........................................................................7 

Sailing Suits ..........................................................................................8-9 

Dryshirts, Rash Guards & Wetsuits ..........................................10-11 

Boots, Knee Pads, Hoods & Hats .....................................................12 

Gloves .......................................................................................................13 

Fasteners .................................................................................................14 

Rope ..........................................................................................................15 

Maintenance ...................................................................................16-17 

Life Vests & Safety ................................................................................18 

CATAMARAN ACCESSORIES ............... 19-59 

Wind Indicators / Regatta ..................................................................19 

Mainsheet Systems / Mainsheet Blocks & Accessories .... 20-21 

Main Travelers / H-16 Jib Traveler Controls ................................22 

Jib Sheeting Components / Jib Halyards & Kits ........................23 

Ratchet Blocks .......................................................................................24 

Blocks ........................................................................................................25 

Downhauls ..............................................................................................26 

Mast Rotation / Spare & Replacement Parts ...............................27 

Swivel Cleats & Bases / Fairleads & Sheaves ...............................28 

Cleats ........................................................................................................29 

Convenience Items ..............................................................................30 

Ball-Lock Pins & Shackles / Clevis Pins & Retainers ..................31 

Rudder Pins & Kits / Rudders & Daggerboards ................... 32-33 

Trampolines & Accessories ...............................................................34 

Tramp Accessories & Non-Skid / Hiking Sticks ..........................35 

Righting / Righting Systems ......................................................36-37 

Catamaran Battens ..............................................................................38 

Batten Caps & Sail Accessories ........................................................39 

Sails ............................................................................................................40 

Roller Furling Hardware / Spinnaker Hardware ........................41 

Ports & Accessories ..............................................................................42 

Cat & Dinghy Videos & Books ..........................................................43 

Murrays Catamaran Harnesses .................................................44-45 

Cat Spreaders .........................................................................................46 

Gul Catamaran & Dinghy Harnesses .............................................47 

Trapeze Rings, Handles & Accessories ..........................................48 

Trapeze Adjustment Kits ...................................................................49 

Standing Rigging ...........................................................................50-51 

Trapeze Assemblies / Other Rigging .............................................52 

Rigging Hardware & Accessories ....................................................53 

Mast Supports & Steppers / Trailer Boxes ...................................54 

Hull Cradles & Tie-Downs ..................................................................55 

Torqeedo Electric Motors / Motor Brackets ................................56 

Beach Transport ....................................................................................57 

Boat Covers / Other Covers .......................................................58-59 

WINDSURFING ACCESSORIES ............ 60-69 

Windsurfing Videos & Books ............................................................60 

Windsurfing Harnesses & Spreader Bars ...............................60-61 

Harness Lines / Footstraps ................................................................62 

Traction / Mast, Uni & Boom Pads ..................................................63 

Windsurf Bags ........................................................................................64 

Transport & Storage ............................................................................65 

Streamlined Universals & Extensions ............................................66 

Streamlined Booms & Accessories / NoLimitz Masts ..............67 

Universals / Outhauls & Boom Accessories / Uphauls ............68 

Downhauls & Tools / Fin Accessories ............................................69 

KITES & ACCESSORIES .......................70-79 

Kiteboarding Harnesses, Spreaders & Pads .........................70-71 

Chicken Loops & Sheeting Systems ..............................................72 

Kite Sheeting Items / Shackles ........................................................73 

Trainer Kites & Repair / Bladders & Pumps ..................................74 

Kite Lines .................................................................................................75 

Kiteboard Foostraps & Pads .............................................................76 

Handles, Heelstraps & Fins / Leashes & Impact Vests .............77 

Kite Equipment Bags ...........................................................................78 

Kite Books & Videos .............................................................................79 

STAND-UP PADDLING .......................... 80-81 

INDEX .................................................. 82-83 

Prices & specifications are subject to change www.murrays.com 800-786-7245 CONTENTS 

1

GATH ® HELMETS 

GATH HEADGEAR FOR AIR, SNOW & WATER 

Since 1989, thousands of users, including professional and recreational 

surfers, whitewater paddlers, kiteboarders, skydivers and 

rescue service personnel, have benefited from Australian Ric Gath’s 

lightweight, close-fitting headgear. 

WHAT BENEFITS CAN YOU EXPECT IF YOU CONSISTENTLY 

WEAR GATH WATER SPORTS HEADGEAR? 

• Protect covered areas from boards and fins (yours or others). 

• Protect your head and ears from rock or reef rash. 

• Protect your inner ears from rupture by sudden pressure. 

• Protect your inner ears from “surfers ear” or “swimmers ear.” 

1) Bone growth closes ear canal; 2) Inner ear infection. 

• Maintain core temperature with less wetsuit. 

(Save 20% heat loss vs. uncovered head.) 

• Help protect skin and eyes from sunburn and skin cancer. 

GATH ® SURF CONVERTIBLE 

GATH ® GEDI CONVERTIBLE 

Wear with or without ear protection and/or visor 

SIZE CHART FOR GEDI 

Size Code Head Measure Head Measure 

S 1 21-1/4" – 21-7/8" 54 – 55.5 cm 

M 2 22"– 22-5/8" 56 – 57.5 cm 

L 3 22-7/8"– 23-1/4" 58 – 59 cm 

XL 4 23-3/8"– 24" 59.5 – 61 cm 

XXL 5 24"– 24-3/8" 61 – 62 cm 

XXXL 6 24-1/2"– 25" 63 – 64 cm 

GATH ® SURF CONVERTIBLE 

The Surf Convertible's light weight, comfort and 

convertibility make it the best choice for surfers. 

$99.00 Please add size code from chart. 

52-140_ Matte White 

52-141_ Black Rubber 

52-142_ Iridescent Blue 

52-143_ Cherry Red 

52-144_ Platinum Silver 

52-146_ Yellow 

52-148_ Pink Suede 

WHY SHOULD YOU CHOOSE GATH? 

• Small and round size and shape to prevent “bucketing” or snagging. 

Big helmets with hard “lips” or “peaks” can scoop water or grab rocks or reef. 

• Maximum coverage, including lower cranium and ears. 

• Face and eye protection is a big bonus! 

• Light weight (wet or dry) reduces neck strain. 

• Full peripheral vision with no blind spots. 

• Helps prevent water from draining over your eyes when emerging from 

water. 

• Secure fit, including proper size and a buckle system that does not permit helmet 

to become dislodged or displaced. (If it comes off, it's no good!) 

• Appropriate materials and hardware like closed cell foam (does not absorb 

water) and stainless steel (does not rust). 

WARRANTY 

3-year warranty against defects in materials and workmanship. 

Warning: Wearing headgear offers some protection and may build confidence. However, it is no 

substitute for common sense and may not prevent serious injury or death. GATH Headgear is not 

recommended for use as a crash helmet on roads or highways. Gath recommends that the audio vents 

be closed during any watersports action and that they be opened only at times when water pressure 

induced ear injury is not a possibility and full audibility is desirable. 

GATH ® GEDI CONVERTIBLE 

Purpose designed 

to meet the special 

requirements of 

extreme kayaking (white water and “creeking”), 

extreme kiteboarding, rescue service personnel 

using PWC’s, swift water rescue 

services and others. Design criteria: 

To provide the best coverage and 

the most impact protection while 

still maintaining the low-profile, 

hydrodynamic shape required for high 

speed water entry. We believe that 

the Gedi will set the standard by which 

all others will be compared. The Ribbed Peak 

Visor is included with Gedi purchase! 


52-150_ White 

52-151_ Black 

52-151_C Carbon Finish 

(add $10) 

52-152_ Blue 

Wear with or without 

ear protection 

SIZE CHART FOR SURF CONVERTIBLE 


XS 0 up to 21-1/4" up to 54 cm 

S 1 21-1/4" – 21-7/8" 54 – 55.5 cm 

M 2 22"– 22-5/8" 56 – 57.5 cm 

L 3 22-7/8"– 23-1/4" 58 – 59 cm 

XL 4 23-3/8"– 24" 59.5 – 61 cm 

52-153_ Red 

52-154_ Silver 

52-155_ Olive 


52-159_ Gray 

With optional 

Gedi visor 

Optional Gedi Visor $30.00 

0=Clear, 9=Gray 

52-04_2 Gedi Visor: Fits Small to Large Gedi 

52-04_3 Gedi Visor: Fits X-Large Gedi 

Ribbed Peak Visor 

A ribbed peak visor is included with the 

Gedi, but the visors are also available separately. 

$19.95 

52-0382 Size 2: Fits Small to Large Gedi 

52-0383 Size 3: Fits X-Large Gedi 

Photo: Gary Burtka 

Photo courtesy of Pascal Hardy 

GATH ® CONVERTIBLES 

The Gath Surf Convertible and Gath Gedi 

represent Ric Gath’s response to over 10 

years of experience and customer feedback. 

Check out the following improvements: 

• More comfort: Flexible ear protectors 

with comfortable foam lining adapt to 

your face size and shape. 

• Versatility: Ear protectors are removable! 

Optional coverage accommodates 

temperature or user preference. 

• More ear protection: Improved 

comfort and fit. 

Better hearing: New Gaths are quiet. 

Wind noise is greatly reduced. 

• Surf Convertible Forehead 

Protection: The Surf Convertible features 

foam “mini peak” forehead coverage that 

adds some additional protection. 

• Gedi Forehead Protection: The Gedi 

helmet covers and protects the forehead 

at the same level of impact protection as 

the rest of the helmet. 

• Eye and Facial Protection: Optional 

visors will add protection from sun and 

spray and may offer some additional 

protection from abrasion and/or impact. 

• Communication & entertainment 

compatibility: New Gath ear protectors 

will accommodate forthcoming 

waterproof speakers and microphones 

for use with cell phones, radios and 

MP3 players. Call or check website for 

additional information. 

• A skate-style appearance: Provides 

more coverage, a solid retention system 

and long-lasting saltwater safe materials 

and fasteners. 

Replacement Parts 

Additional comfort strips (#52-05__) are 

available to help achieve a fit that offers 

maximum comfort and staility. Audio vent 

parts and ear protectors are also available. 

2 CROSS-SPORT ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change

GATH ® SPORT HAT & OPTIONS 

Photo: Daniel McCain 

Photo: Troy Maben, Cascade Kayak School 

Photo: FlyBoyz 

Photo: John Healey 

GATH ® SPORT HAT (NO VISOR) 

This ultra-lightweight model for high energy performance 

situations is the primary choice for sky 

divers (head up) and many surfers. EVA headband 

provides additional forehead protection. 


52-100 _ White 

52-101 _ Black 

52-102_ Blue 

52-103 _ Red 


52-106 _ Yellow 

Options 

52-105 _ Water Ski Race Model– Safety Orange (as required) 

with Goggle Strap $109.00 

52-0070 Audio Altimeter Bracket & Cover 

(fits ProDytter) $21.95 

52-0008 Goggle Strap Retainer with Fasteners $5.95 

Additional Replacement Parts 

Audio vent parts and chin straps are also available. 

Information is available at the Murrays website. 

GATH ® FULL RETRACTABLE VISOR GATH 

WITH FULL VISOR 

Used by whitewater, PWC riders, rescue services and 

sky divers (head down), this model features a fully 

retractable visor that protects eyes and face and blocks 

more than 98% of UV light. 


52-110 _ White 

52-111_ Black 

52-112_ Blue 

52-113_ Red 


52-115_ Orange 


® & OPTIONS 

To adjust fit of Retractable Visor model a 

bit smaller, add a piece of neoprene just inside 

the neoprene forehead band. 

FOGZERO 

Fogzero’s proprietary 

polymer 

blend provides 

a powerful and 

long-lasting 

antistatic and antifog for Gath visors, and it helps 

prevent droplets, too! Also great for goggles, 

binoculars, camera lenses, CDs and DVDs. Nontoxic. 

1-oz. kit includes cloth. 

52-5101 .25 oz. $4.95 

52-5102 1.0 oz Kit $19.95 

SIZE CHART FOR SPORT HAT 


XS 0 up to 21-1/4" up to 54 cm 

S 1 21-5/8" – 22" 54 – 56 cm 

M 2 22-1/4"– 22-7/8" 56 – 58 cm 

L 3 22-7/8"– 23-3/8" 58 – 59.5 cm 

XL 4 23-3/8"– 23-5/8" 59.5 – 61 cm 

New for 2009… Size/comfort strip fitting system! 

Optional 

Audio Altimeter 

Bracket & Cover for Gath Hat 

& Retractable Visor Models 

GATH ® HELMETS 

Prices & specifications are subject to change www.murrays.com 800-786-7245 CROSS-SPORT ACCESSORIES 

Photo: Jenning Steger/SLP 

Photo: Core Wakeboards 

SIZE CHART FOR RETRACTABLE VISOR 


XS 0 up to 21-1/4" up to 54 cm 

S 1 21-1/4"– 21-7/8" 54 – 55.5 cm 

M 2 21-7/8"– 22-5/8" 55.5 – 57.5 cm 

L 3 22-5/8"– 23-1/4" 57.5 – 59 cm 

XL 4 23-1/4"– 23-3/8" 59.5 – 61 cm 

XXL 5 23-3/8" and above 61 cm – 62 cm 

REPLACEMENT VISORS FOR FULL RETRACTABLE VISOR GATH 

With tool and instructions for installation. 

52-0003-9 Replacement Visor S/M Gray $21.95 

52-0004-9 Replacement Visor L/XL Gray $21.95 

Optional Visor Colors for Full Visor Gath 

Colors: 0=Clear, 3=Red, 6=Yellow (Blue is discontinued) 

52-0003-_ S/M Visor: Please specify color $21.95 

52-0004-_ L/XL Visor: Please specify color $21.95 

Altimeter Bracket Option 

52-0070 Audio Altimeter Bracket & Cover 

(fits ProDytter) – See photo above with Gath Hat options $21.95 

Additional Replacement Parts 

Audio vent parts and chin straps are also available. Information is available at www.murrays.com. 

Photo: Glenn Dubock 

Wear the visor 

up, down or 

anywhere in 

between! 

3

INSTRUMENTS 

WINDMATE 200 

The first windmeter with wind vane, digital wind direction, cross wind and head/tail wind 

readings! Reads current, average and maximum windspeed to within +/- 3% in your choice 

of knots, mph, kph, m/sec, ft/min and Beaufort. It also measures temperature and windchill 

accurately to +/- 1.8°F. Digital wind direction is in degrees and compass points accurate 

to +/- 2°. A wind vane assures you are on the wind’s axis. The jackknife 

case allows the most accurate measurements and meets U.S. military 

specifications, and it has a handy tripod fitting. The included lithium 

battery is replaceable. Two year warranty. 

49-0002 $125.00 

FASTFIND SATELLITE PERSONAL 

LOCATOR BEACON 

FASTFIND is the most compact, waterproof 

and versatile 

406 MHz 

emergency 

location 

beacon 

available 

on the 

market 

today. It 

fits easily 

into backpacks, on life jackets... put it just 

about anywhere, and get found anywhere 

in the world. No subscription fees are 

required. 

11-3021 $299.00 LIMITED TIME PRICE 

VELOCITEK GPS SPEEDOMETER/VMG 

The Velocitek SC-1 gives you the functionality of a complete instrument 

suite in a self-contained device that can be mounted anywhere 

on your boat. It installs in seconds and does not require any 

external wiring or through hull transducers. In addition to 

providing real-time speed, heading and VMG information, the 

SC-1 also stores and organizes speed, heading, position and 

time data for your most recent 40 hours of sailing. Key features 

include: speed, VMG and heading updated every half-second; start 

timer with audible alarm; calculates distance to start line; display any two measurements simultaneously; 

watertight to 25m (75ft); only brand of GPS that floats; maximum and best 10 second average speed 

recall; adjustable damping; up to 25 hours of battery life; fast data downloading through a USB link; 

downloaded data is fully compatible with Kattack, GPS Action Replay and Google Earth; Internet upgrade- 

able firmware allows you to benefit from ongoing product enhancements. 

49-0051 Velocitek SC-1 $499.00 

49-0051-1 Lash Plate $35.00 

49-0051-2 Mast Slot Mount $49.00 

WINDSCRIBE ULTRASONIC WINDMETER 

This ultrasonic 

windmeter uses 

patented 

technology to 

read current 

wind 

speed, 

highest 

positive speed (headwind), 

lowest negative speed (tailwind), 5-second average, 

and running average. Select from mph, km/h, fpm, m/s, 

f/s, or knots, plus temperature and wind chill in tenths 

of °F or °C. Sensitive to breezes as low as 0.4 mph, 

yet withstands winds as high as 150 mph. Includes 

replaceable 3-volt lithium battery, lanyard and mounting 

bracket. Battery lasts up to 600 hours. The 5” x 3” x 

3⁄4”unit weighs 3-1⁄2 oz . One year warranty. 

49-0007 $99.00 CLOSEOUT 

49-0051-3 Adhesive Dual Lock Rectangle $6.50 

49-0051-4 Spinnaker Pole Mounting Bracket $79.00 

VELOCITEK SPEEDPUCK 

The SpeedPuck improves your sailing by allowing you to quantify the effects of 

boat trim, sail trim, wind shifts and current. No more guessing! The SpeedPuck 

combines a high-accuracy GPS speedometer, compass and bar graph wind shift 

indicator in a compact, durable package and is designed to be mounted on a 

boat or hand-held when hiking out. The 4.5” diameter unit uses 3 AA batteries. 

Multiple mounting options as with Speedometer/VMG above. One year warranty. 

49-0053 $339.00 

SEA ROVER DIRECTIONAL 

DECK COMPASS 

The Sea Rover features a large 

compass with easy-to-read markings. 

With a simple yet elegant base, it 

attaches easily to deck lines or sits 

nicely on top of a deck bag. Quick-release buckles allow for easy attachment. Measures 7” long x 4” wide 

x 2” high. Weighs 6.4 oz. 

49-2019 $24.95 

RONSTAN CLEARSTART RACE TIMER AND WATCHES 

Ronstan Clearstart A B C D 

watches and timers were created for sailors. They cover every aspect of race timing 

plus every-day watch modes, including stopwatch/chronograph, countdown, countdown repeat or 

count down and up timer, synchronize function, and 12/24-hour timekeeping. The three watches have 

electro-luminescence backlight, daily alarm and calendar. All feature shock-resistant construction and use 

a readily available 3.0-volt CR2032 Lithium battery. 

A. The Race Timer has a large 38mm x 20mm 

display with extra-large 16mm digit height, 

easy-hit oversize controls, adjustable viewing 

angle, spar/hull mounting options, elastic strap 

for wrist/sleeve, and water resistance to 50m. 

Weighs 2.3oz. 

21-4030 Race Timer $120.00 

B. The Sailing Watch has a 26mm round 

display with large 10mm digits, prominent red 

start/stop button, an ABS case with integrated 

soft touch PU strap, and water resistance to 50m. 

Weighs 1.8 oz. 

21-4031 Sailing Watch $64.95 

AQUAPAC WATERPROOF CASES 

The key to the world's best-selling, guaranteed 

submersible, use-through protective 

cases is the patented Aquaclip sealing system. 

All Aquapac cases sealed by the Aquaclip 

are submersible to at 

least 15 ft/5m and 

are backed by a 

3-year global 

warranty. The 

material is 

suitable for 

extreme cold 

climates as 

low as 

-40 ° F. 

SETI CASE 

The multipurpose 

Seti 

Case is great 

for protecting 

all your gear 

when you’re 

in or around 

water. Ideal 

as a grab-bag, 

the case is 

made of a 

super-strong 

marine nylon 

used to make 

life jackets and 

rigid inflatable boats. Complete with a fully-adjustable 

and detachable shoulder strap. Measures 

17” x 13.75” x 1”. WATERPROOF! 

49-1748 $70.00 

C. The Race Watch has a 26mm round 

display with large 10mm digits, prominent red 

start/stop button, an ABS and stainless steel case 

with removable soft touch PU strap, and water 

resistance to 50m. Weighs 1.9 oz. 

21-4032 Race Watch $84.95 

D. The Regatta Watch has a 26mm round 

display with large 10mm digits, rugged polished 

stainless steel case and strap, and water resistance 

to 100m. Weighs 5.5 oz. 

21-4036 Regatta Watch $139.95 

AQUAPACS ® 

KEYMASTER CASE 

Specifically designed 

to keep keys and car 

remote safe 

from water 

damage. Small 

enough to be 

tucked inside your 

WATERPROOF! 

wetsuit. Also great for keeping asthma inhalers 

safe. The Keymaster is waterproof to a depth 

of 150ft/50m and is supplied with a neck cord. 

Constructed of PVC-free materials. Measures 

6.25” x 3.25” x .75”. 

49-1604 $20.00 

F 

E 

WATERPROOF! 

E-F. WHANGANUI CASES 

Designed to hold large items, these versatile 

multi-purpose cases are waterproof to 15 ft/5m 

and will float if dropped in the water. You can 

see the items inside the clear case. Large and 

Jumbo cases have shoulder strap and eyelets for 

easy attachment to cats, canoes and kayaks. 

49-1644 Mini– 8" x 5.5" x .75" $27.00 

E. 49-1654 Small– 11.5" x 5.5" x .75" $28.00 

49-1664 Large– 13.5” x 9.5” x 1” $45.00 

F. 49-1674 Jumbo– 17.5” x 13.75” x 1” 

$50.00 

Also available: Noatak 15 and 25 liter Dry Bags 


MEASUREMENTS SHOWN ARE OUTSIDE DIMENSIONS. PLEASE VISIT WWW.AQUAPAC.NET FOR SIZE GUIDES. AQUAPACS ® 

BELT CASE WATERPROOF! 

The Belt Case is ideal for protecting small essential 

items in all weather conditions and can be worn 

around the neck with the detachable neck cord 

or with the belt around the waist. It is 100% 

waterproof and submersible to 15ft/5m, 

plus it keeps out dust and sand. The case will 

float safely if dropped in water. This case measures 

8” x 5.5” x .75” and is perfect for keys, phone, 

small camera, credit cards or other small items. 

49-1824 $35.00 

MP3 PLAYER CASE WATERPROOF! 

Take your favorite tunes with you wherever you go. Specifically 

designed to keep your MP3 player safe from water, sand and dirt, the 

MP3 Player Case features a built-in external headphone jack on the 

front of the case for your earphones (sold separately) and a clear front 

panel that allows full operation of controls and click wheels. The ultralightweight 

case is guaranteed submersible to 15 ft/5m. Constructed 

of PVC-free materials that make it easy to operate your MP3 player 

through the case. Complete with armband, neck cord, desiccant to 

absorb condensation, and instructions. Measures 7.5” x 3.25” x .75”. 

49-1515 $50.00 

WATERPROOF HEADPHONES WATERPROOF! 

The perfect companion for the Aquapac MP3 Player Case. Aquapac’s 

guaranteed-submersible, waterproof headphones feature amazing 

sound quality both underwater and above. They are ultra-lightweight 

and have a comfortable, in-ear design. The headphones come with a 

nickel-plated, rustproof universal stereo jack, spare silicone earbuds, and a headphone buoy for safe storage. 

Not suitable at depths of more than 10 ft/3m where lack of equalization could damage eardrums. 

49-1916 $45.00 

A. CAMERA CASES WATERPROOF! 

Protect your camera from the elements while you're near, on and in the water! Shoot 

excellent photos directly through the ultra-clear, optical quality Lenzflex 

window. These durable cases won't rust or corrode and all are waterproof 

up to 15 ft/5m and float with your camera inside. Mini case fits most mini 

digital cameras without a zoom. Small case fits digital cameras with a small 

zoom lens. Large case fits larger digital cameras with a zoom lens, or a 

small camcorder. #49-1420 and 49-1455 have an optically-clear hard lens 

window for even better quality photos. 

A. 49-1404 Mini Camera Case– 6.75” x 4” x .75” $35.00 

49-1414 Small Camera Case– 8.25” x 5.625” x .75” $40.00 

49-1445 Large Camera Case– 8” x 8.25” x 1.25” $50.00 

49-1420 Small Camera Case with Hard Lens– 6.75” x 4” x 1.75” $55.00 

49-1455 SLR Camera Case with Hard Lens– 14” x 10” x 3.5” $130.00 

CONNECTED ELECTRONICS CASE 

Sound and signal pass right through the material, 

so you can use your equipment normally 

in the case. A stylus can be used through the 

clear window on the case. This case is ideal 

for larger MP3 players, portable walkmans or 

larger PDA navigation systems that connect to 

GPS. It features the “TC” Aquaclip, a waterproof 

wire-through seal that allows wires up to 2.5mm 

(.1”) to be used with your equipment. This case 

is recommended for surface use only and is NOT 

designed for continued submersion. The airtight 

seal means your equipment will float safely if you 

drop it in water. Comes with a detachable neck 

cord. Measures 9.5 x 5.5 x 1.25". 

49-1554 $90.00 

SPLASHPROOF! 

RADIO MICROPHONE/INSULIN 

PUMP CASE 

This case features the “TC” Aquaclip, a watertight 

wire-through seal that allows wires up to 2.5mm 

(.1”) to be used with your equipment. Sound and 

signal pass right through the material, so you 

can use your equipment normally in the case. 

This case is recommended for surface use only 

and is NOT designed for continued submersion. 

Measures 9.25” x 3.125” x 1”. 

49-1154 $65.00 

A 


B 

FLIP-PHONE CASE WATERPROOF! 

Not only can you make and receive calls in the Flip-Phone case, it also allows you to take 

pictures and video footage from your phone while in the water, sand or stormy weather. 

Guaranteed submersible to 15ft/5m and will float safely if dropped in water. Foampadded 

back for added comfort and protection. Material is suitable for extreme 

cold temperatures to -40 degrees F. Your phone will have full functionality and 

protection even though it will not close completely. Complete with instructions, 

adjustable neck cord and desiccant. 6.75” x 3.25” x .75”. 

49-1084 $40.00 

CAMCORDER CASE WATERPROOF! 

Use your camcorder 

whatever the 

weather, wherever 

you go. This case is 

100% waterproof 

and submersible to 

15ft/5m. Shoot video 

through the opticallyclear 

hard lens window. 

The case holds both 

palm and barrel camcorders 

and will float 

with your camcorder 

inside! Constructed of 

PVC-free materials that 

are suitable for extremely cold climates as low 

as -40 degrees F. Comes with a convenient, detachable 

shoulder strap and desiccant to absorb 

condensation in humid conditions. Measures 

10” x 10” x 3.5”. 

49-1465 $130.00 

C. PRO SPORTS ARMBAND CASES 

Wear a rugged, multipurpose 

Armband 

case on your arm 

or leg to keep your 

hands free to enjoy 

any activity. Suitable 

for GPS, mobile 

phones and walkie 

talkies, these cases 

are made of military 

B. CELL PHONE/GPS CASES WATERPROOF! 

Keep communications open with these handy cases. The thin, malleable material 

of the cases means you can operate your phone, pager or GPS as normal through 

the case without affecting sound. They are guaranteed submersible to 15 ft/5m 

and float with your phone or GPS inside. The foam-padded back gives extra 

comfort and protection. Supplied with a neck cord and instructions. 

B. 49-1104 Mini Phone/GPS Case– 7.75" x 3.25" x .75" (fits iPhone) $30.00 

49-1114 Small Phone/GPS Case– 9" x 3.25" x .75" $30.00 

49-1124 Medium Phone/GPS Case– 9.5" x 4.125" x .75" $30.00 

WATERPROOF! 

specification reinforced vinyl material and are 

guaranteed submersible to 15ft/15m and they 

are dust and sand-proof, too! Sound and signal 

pass right through the case material. The airtight 

seal means your equipment will float safely if 

dropped in water. Complete with neoprene and 

Velcro ® armband, a detachable neck cord and 

instructions. The small model is ideal for smaller 

phones, GPS and two-way radios. 

C. 49-1210 Small Armband Case– 8.25" x 

3.25" x .75" high $45.00 

49-1212 Large Armband Case– 9.25" x 

4.25" x .75" $45.00 

C 

D E 

D-E. VHF RADIO CASESWATERPROOF! 

Use your handheld radio whatever the weather, 

wherever you go. Aquapac's VHF radio cases are 

waterproof to 15 ft/5m and float with your radio 

inside. They fit almost all radio models because 

the reversible design can be used with left or 

right hand antennas. Talk directly through the 

case with no loss of signal. The adjustable neck 

cord that makes it convenient to carry or attach 

wherever needed. Size large stock is limited. 

D. 49-1224 VHF Classic Small Case– 

14" x 4.25" x .75" $35.00 

49-1244 VHF Classic Large Case– 

16.75" x 5" x .75" $30.00 

E. 49-1225 VHF Pro Small Case– 

15.5" x 4.75" x .75" $60.00 

F. PDA CASES 

These cases have an 

airtight seal to keep your 

PDA safe from sand, 

dust and water up to 

15 ft/5m, and they will 

float safely if dropped in 

water. There's never any 

need to take your PDA WATERPROOF! 

out of the case because 

F 

you can use your stylus 

through the clear window, then store the stylus 

in the integrated holder. Detachable cord. 

F. 49-1344 PDA Small– 7.5" x 4.5" x .75" 

$30.00 

49-1364 PDA Large– 9.5" x 5.75" x .75" 

$35.00 

5

BARZ ® OPTICS 

HOW MUCH EYE PROTECTION DO YOU NEED? 

Extreme Protection: Barz Sport Goggles protect 

your eyes from the elements of sun, water and spray, 

wind, dust, sand and pebbles, all while looking good and 

maintaining excellent peripheral vision. 

Safety Frames: Barz Sport Goggles' molded nylon 

frames are virtually unbreakable and were designed so 

that the lenses cannot be dislodged inwardly from a 

frontal impact. The combination of polycarbonate lenses 

and Barz safety frames means you get the strongest and 

safest Rx-able sport goggles possible. 

Prescription Lenses: This is the BIG benefit if you 

need serious vision correction. Many people have lost 

some visual acuity with age and appropriate correction 

can add measurably to performance, pleasure and 

safety. The range of options and services is expanding, 

so please call or visit the Murrays Web site for additional 

information. 

Custom Fit: While Barz Cross-Sport Goggles come 

fully assembled and ready to wear, they can be easily 

disassembled and rebuilt to provide a more customized 

fit. Included options and variables include: 

1. Nose bridge width (3 choices). 

2. Curvature of nose bridge (flexible bridges self-adjust 

to the curvature of your face). 

3. Gaskets are asymmetrical to provide rotate-to-fit 

custom fit capability (instructions included). Vented 

gaskets (installed) provide balance between blocking 

wind and allowing ventilation to limit fog. Sealed gaskets 

(included) completely seal wind and water away 

from eyes. Sealed gaskets can be “custom vented” 

using a simple paper punch tool. Extra-deep gaskets 

are also available to provide additional adjustment 

options. 

4. Strap tension. 

Extreme Security: Barz Cross-Sport Goggles are 

retained by elastic straps that are more durable and hold 

your cross-sport eyewear more securely than temple 

bars. Additionally, elastic straps fit comfortably inside or 

outside of sport helmets. Watersports participants should 

install the heavy duty leash unless the goggles are being 

secured to or under your headgear. Store your Barz in its 

durable and convenient zippered neoprene case when 

not in use. 

Anti-Fog: Apply Fogzero (#52-510_) prior to wearing 

to reduce fogging. For in-water sports, we recommend 

carrying a very small container of an anti-fog solution 

(baby shampoo or mild dish soap) for periodic application 

as needed. It is usually best to use the vented gaskets 

and let the wind (real or apparent) keep the fog at bay. 

Biking, PWC riding, skiing, etc. are usually not a problem. 

(e.g.: 5 seconds or so on a chairlift creates enough “wind” 

to clear the goggles, if needed, after a hard run.) 

BARZ SPORT GOGGLES 

CROSS-SPORT, AMPHIBIOUS EYEWEAR 

WITH 100% UV PROTECTION! 

Barz Sport Goggles offer maximum protection from dust or spray, sun 

and wind for kiteboarders or windsurfers, motorcycle and PWC riders, 

sailors, and surfers. Participants of many other activities will also 

benefit from Barz: mountain bike, sky dive, glacier climbing, skiing 

and snowboarding, water skiing and wakeboarding, power boating, 

rescue services, Navy Seals, sand storms, and trekkers. Anyone who 

suffers from dry eyes will find Barz extremely beneficial. 

BARZ ® SPORT GOGGLES WITH STANDARD LENSES 

Molded nylon frames with polycarbonate lenses in blue-gray color for all-around use . 

52-3311 Black Frame with Blue-Gray Lenses $100.00 

52-3341 Blue Frame with Blue-Gray Lenses $100.00 

52-3351 Other Color Frame with Blue-Gray Lenses 

(Yellow, Orange, Smoke) $100.00 

BARZ ® SPORT GOGGLES WITH POLARIZED LENSES 

Black molded nylon frames with polarized polycarbonate lenses. Polarized lenses block glare, 

improve contrast and maximize visual acuity, making your eyes more comfortable. Photochromic 

lenses darken when exposed to sunlight. 

52-3311-21 Black Frame with Gray Polarized Lenses $130.00 

52-3311-24 Black Frame with Green Polarized Lenses $130.00 

52-3311-25 Black Frame with Brown Polarized Lenses $130.00 

52-3310-41 Black Frame with Gray Polarized & Photochromic Lenses $140.00 

52-3310-45 Black Frame with Brown Polarized & Photochromic Lenses $140.00 

Barz Optics Photo 

Eric Marchand 

Eden Rue 

Eric Marchand 

Barz Optics Photo 

Photo: Guillaume Tessier 

Go to the 

Murrays website at 

www.murrays.com 

for additional information 

BARZ SPORT GOGGLES INCLUDE: 

• Custom Fit Kit: Two additional nosebridges, one 

smaller and one larger than standard, provide a 

comfortable fit for most face sizes and shapes. 

• Hypoallergenic Gaskets: One pair of vented gaskets 

are installed on the goggles; one pair of sealed gaskets 

are also included in the kit. 

• Sturdy Leash: Wear around your neck or attach to 

your wetsuit zipper pull. 

• Neoprene Sport Case with Belt-loop Snap 

Hook: Carry, protect and store your Barz Sport Goggles 

with ease. 

HIGH-WRAP 

POLARIZED 

SUNGLASSES 

Visit www.murrays.com 

for details. 

Frame Colors: 

Crystal (discontinued), 

Blue, Black. 

Additonal colors 

are also available. 

BARZ ® CROSS-SPORT GOGGLES WITH PRESCRIPTION LENSES 

A prescription order form, available at www.murrays.com or by fax, makes 

ordering easy. Before ordering prescription lenses, you will need to order a pair of 

Barz so that you can try them on and determine which nosebridge fits your face. 

Prescription lenses can be fitted into black frames only. Return the frames with your 

prescription and we will have the lenses fitted. In general, prescriptions of -6.00 to 

+2.00 can be made to fit into the Barz frames. Lab time is approximately 10-15 

days. The basic price for Barz with prescription lenses is $215 ($115 for lenses plus 

$100 for the goggles) and they can be made polarized and/or photochromic (color 

REPLACEMENT PARTS 

Barz Sport Goggles are the most serviceable goggles 

you'll ever own. Everything is easily and economically 

replaceable if you lose or scratch a lens or break a part. 

Visit www.murrays.com or call for more information. 

POLYCARBONATE LENSES 

All lenses offer 100% UV protection. High-definition 

yellow enhances contrast in low-light conditions. 

Photochromic lenses darken when exposed to 

sunlight. Pair. 

52-3011 Lenses P/C Blue-Gray $30.00 

52-3013 Lenses P/C Hi Def Yellow $30.00 

52-3016 Lenses P/C Clear $30.00 

52-3022 Lenses P/C Polarized Gray $60.00 

52-3024 Lenses P/C Polarized Green $60.00 

52-3025 Lenses P/C Polarized Brown $60.00 

52-3041 Lenses P/C Polarized & Photochromic 

Gray $70.00 

52-3045 Lenses P/C Polarized & Photochromic 

Brown $70.00 

GASKETS 

Sealed gaskets totally block wind, spray and dust, or 

can be custom vented with a paper hole punch. Pair. 

52-3032 Standard Gaskets: Sealed Black $5.00 

52-3033 Standard Gaskets: Vented Black $5.00 

52-3034 Standard Gaskets: Sealed Clear $5.00 

52-3035 Standard Gaskets: Vented Clear $5.00 

52-3038 Deep Gaskets, Sealed Clear $6.00 

52-3039 Deep Gaskets, Vented Clear $6.00 

HINTS FOR FITTING & USE 

Instructions for fitting and hints for optimal use are at 

www.murrays.com. 

Example of Barz with a relatively 

high Rx lens 

change activated by UV light) for an additional $60 each option. There may be an extra charge for a difficult 

prescription. Please check with Murrays regarding the availability of prescription goggles with your prescription 

and choice of options. More information is available at the Murrays website or by calling Murrays. 


BARZ ® SWIM GOGGLES WETSUIT & DRY SUIT CARE 

BARZ SWIM GOGGLES FOR LAP 

SWIMMERS & TRI-ATHLETES 

• Shatterproof polycarbonate lenses with 

or without built-in prescription. 

• Tinted lenses for outdoor swimming. 

• 100% UV protection. 

• Anti-fog coating on the inside. 

• High-quality silicone strap and gaskets. 

• Three sizes of interchangeable flexible 

nosebridges for proper fit. 

• Relatively wide field of vision. 

Barz Swim Goggles are available with nonprescription 

lenses or with off-the-shelf 

corrective lenses from -2.00 to -7.00 in 

increments of .50. 

SWIM GOGGLES WITH 

NON-PRESCRIPTION LENSES 

Assorted frame colors as listed. 

$29.00 

52-4111 Black 

52-4121 Clear 

52-4131 Blue 

52-4141 Purple 

SWIM GOGGLES WITH 

PRESCRIPTION LENSES 

1. Order the Swim Goggle Kit from list below. 

2. Order lenses from list at bottom of the page. 

NOTE: Rx swim lenses are interchangable and do 

NOT need to be the same power! 

SWIM GOGGLE KITS FOR 

PRESCRIPTION LENSES 

Order Prescription Swim Goggle Kit , then choose 

two lenses from listing below (corrective lenses). 

These item numbers directly below are for the 

frame kits only. 

$19.00 

52-4210 Black 

52-4220 Clear 

52-4230 Light Blue 

52-4240 Purple 

52-4250 Other Assorted Colors 

SWIM GOGGLE PRESCRIPTION 

LENSES (EACH) 

Since lenses are ordered individually, your 

goggles can have a different prescription lens 

for each eye to assist with optimum clarity. 

Order two! 

$18.00 each 

52-4320 -2.0 

52-4325 -2.5 

52-4330 -3.0 

52-4335 -3.5 

52-4340 -4.0 

52-4345 -4.5 

52-4350 -5.0 

52-4355 -5.5 

52-4360 -6.0 

52-4365 -6.5 

52-4370 -7.0 

GUL NEOPRENE REPLACEMENT 

DRY SUIT SEALS 

More comfortable, more durable than latex. 

Replace seals on older Gul or other brand dry suit. 

Adhesive (we suggest Aquaseal) and instructions 

not included. Add size code to item number: 

Jr Medium .. 0 Large ...........7 

Jr Large ...... 1 X-Large ........8 

Small .......... 2 XX-Large ......9 

Medium ..... 4 

38-211_ Wrist Seals–pair $24.95 

38-212_ Neck Seal–each $29.95 

A. DRY SUIT LATEX 

SEAL REPAIR KITS 

Replace broken 

and leaking dry 

suit seals. The Wrist 

and Ankle Kits include 

two replacement seals each; 

the Neck Kit has one seal. Kits include seal(s), 

Aquaseal, sandpaper and instructions. 

A 

A. 38-30121 Neck– Small $37.00 

38-3012 Neck– Medium to XL $37.00 

38-3013 Wrist pair– Med to XL $36.00 

38-30131 Wrist pair– XS to S $36.00 

38-3014 Ankle– pair $39.00 

DRY SUIT 

LATEX DRY 

SOCKS 

For additional 

warmth and dry feet, 

replace ankle seals with Dry suit Dry Socks. Easy 

to wear because there is no restriction at the 

ankle cuff. Men's shoe sizes. Pair. 

$45.00 (Seal installation is $30.00/pair) 

38-3051 Small Fits 7-8.5 

38-3052 Medium Fits 8.5-10 

38-3053 Large Fits 10-13 

Murrays can replace your torn drysuit seals 

for a labor charge of $25.00 per neck seal and 

$30.00/pair of wrist or ankle seals. 

Turnaround time is about one week. Please 

call for information and shipping instructions. 

TAKING CARE OF YOUR SUIT 

As with all other possessions, proper usage, care 

and preventive maintenance will prolong the 

life and increase the enjoyment you receive from 

your wet or dry suit. 

• Keep it clean. Rinse the zipper with fresh 

water after every use. Washing with wetsuit 

shampoo and/or MiraZyme and water on 

a regular basis will keep your suit smelling 

fresh and help protect the surface from aging. 

• Rinse with 303 periodically for rejuvenation 

and UV protection. 

• Store your suit in a well ventilated area out 

of direct sunlight. Hang on a wide hanger to 

reduce the strain to the shoulder area. 

• Inspect your suit often for minor damage. 

Take the time to make repairs while they are 

still small. Seal Cement will make instant 

repairs to small nicks or split seams. 

• Pay special attention to dry zippers and seals. 

The proper use of lubricants and protectants 

will prolong the life of zippers and seals and 

help keep you dry and warm. 

303 AEROSPACE 

PROTECTANT 

SPF 40 sunscreen for your stuff! 

This is the maintenance product 

manufacturers recommend most. 

Only 303 beautifies intensely, 

protects powerfully, and lasts! 

Powerful UV screening protection 

for colored gel-coat fiberglass, 

inflatable boats, vinyl, rubber, 

plastics and leather. Spray on/wipe 

dry to provide UV protection 

for wetsuits, dry suits and life 

vests and more. Non-toxic and 

environmentally safe; does not contain silicone 

oils or petroleum distillates. 

40-0303 8 fl. oz.Pump $7.50 

40-0304 16 fl. oz. Trigger $14.00 

40-0305 Gallon $64.75 

ZIP TECH 

ZIP CARE 

WETSUIT SHAMPOO 

To help your wetsuit stay fresh, 

biodegradable suit shampoo will 

get rid of organic residue and salt 

deposits, and improve your suit’s 

fragrance. 8 oz. 

38-1901 $6.75 

MIRAZYME ODOR ELIMINATOR 

Just add to water, dip and dry for 

complete elimination of odors from 

wetsuits, dry suits, neoprene gloves, 

booties and sports gear! Containing a 

unique blend of ten highly specialized, 

light-activated microbial elements, 

MiraZyme is fast, effective, 100% 

natural and biodegradable. Works 

quickly and thoroughly with one application. 

2 fl. oz. 

38-1904 $4.99 

Cleans and lubricates all zippers to 

keep them functioning properly, which 

is especially important on dry suits and 

TiZips. The push-pull brush top means 

the Zip Care actually gets between the 

teeth and physically removes foreign 

debris that can jam the zipper, leaving 

behind a mild lubricant containing no 

silicone. 2 fl. oz. 

38-1925 $6.00 

Designed to inhibit rust, resist corrosion 

and lubricate the metal of watertight, 

airtight zippers. Zip Tech is a solid 

lubricant which contains no silicone or 

paraffin and is packaged in a no-mess, 

roll-on container. 1/2 oz. tube. 

38-1930 $7.00 

SILICONE PUMP 

A great drysuit entry lubricant! 

Also lubricates and maintains all 

other rubber products. 8 fl. oz. 

non-aerosol pump. 

38-1980 $6.75 

AQUASEAL 

AND COTOL 240 

Aquaseal is a unique urethane rubber compound 

which provides superior permanent adhesion, 

wear resistance, flexibility and waterproofing. 

Even holes the size of a quarter can be repaired 

without patches or shrinkage. Aquaseal cures 

to a flexible rubber product. One application 

provides a permanent and flexible repair. 

Recommended for and supplied with dry suit 

seal replacement kits. Cure time: 10-14 hours. 

3/4 fl. oz. tube. Prepare area needing repair with 

Cotol 240 and/or mix it with Aquaseal for full 

strength repairs in just two hours. Kit contains 

3/4 oz. of Aquaseal and 1/2-fl. oz. of Cotol 240. 

38-1910 Aquaseal 3/4 oz. $7.95 

38-1912 Aquaseal/Cotol 240 Kit $11.95 

SEAL CEMENT 

This industrial strength contact cement 

dries quickly, making it ideal for fast, 

in-field repairs. Seal Cement forms 

chemical bonds in the repair area, so 

it's ideal for neoprene repairs, butting 

seams and dry suit seals. This neoprene 

cement cures in just a few minutes. 2 fl. 

oz. tube. Applicator brush included. 

38-1906 Clear $5.99 

38-1906BK Black $5.99 

Dry Suits ...................................................... 8 

Wetsuits ................................................10-11 


7

SAILING SUITS 

BREATHABLE DRYSUITS BY STOHLQUIST & GUL 

Why choose a BREATHABLE drysuit? Too much moisture (perspiration) inside a drysuit, combined 

with cooling to cold conditions outside the suit, mean that you can get COLD! A BREATHABLE drysuit 

vents moisture to help keep you comfortable. See “Hints for Staying Comfortable” on page 9 for 

more information. 

STOHLQUIST BPOD BREATHABLE DRYSUIT 

This innovative next-generation drysuit redefines dry comfort for the sailor, rafter, whitewater paddler 

and sea kayaker by blending the features of the traditional drysuit with 

new developments from Stohlquist drytops to add a significant degree 

of comfort. Features: 

• New, ultra-stretchy neoprene neck seal is dry and 

more comfortable than conventional latex. 

• New built-in relief zippers for both men’s and 

women’s models. 

• New chest pocket. 

• Fabric dry socks are sheathed in black Cordura 

and shaped for one size fits all. 

• Knees and shins are reinforced and padded with 

PE foam. 

• Waterproof Ti-Zip® cross-chest entry conveniently 

closes downward. 

• Wrists have latex gaskets with stretchy hook and loop 

adjusters and self-draining cuff covers. 

• Waterproof/breathable TTL 

Eclipse fabric throughout. 

• Women’s suits are tailored for 

a feminine fit. 

• Men’s drysuits are mango/ 

black; women’s are powder 

blue/black. 

$599.00 

35-565012 Men's Small 

35-565013 Men's Medium 

35-565015 Men's Large 

35-565016 Men's X-Large 

35-565017 Men's XX-Large 

35-565221 Women's X-Small 

35-565222 Women's Small 

35-565223 Women's Medium 

38-565225 Women's Large 

GUL INFRA BREATHABLE DRYSUIT 

Gul’s most popular drysuit is packed with technical features 

for enhanced performance. Glideskin wrist and neck seals 

offer new levels of comfort and the stylish panel layout 

is shaped for an improved fit. Ideal for catamaran and 

dinghy sailing and watersports in the cooler months. 

The GCX3 hard wearing, 3-layer fabric is breathable, 

waterproof and lightweight to protect you from the 

elements and 100% waterproof heat taped seams 

prevent water penetration. Contoured body panels give 

a performance fit for reduced snagging and bulk and improved 

windage. Also features: articulated arms and knees, tough Dynat 

zip with cover, elastic waist, an arm pocket with drainer for secure 

storage, and internal suspender points (suspenders not included). 

Integrated latex socks keep feet warm and dry and are the only 

way to go for fast and easy drysuit entry and removal. Keep in 

mind that you may need to order next size larger boots. Do not 

wear dry suit without boots or shoes! Navy/silver in men's sizes. 

Limited sizes available. 

$399.00 CLOSEOUT 

38-2214 Medium 

38-2218 X-Large 

Replacement seals are 

available by special order. 

RONSTAN BREATHABLE REGATTA SMOCK 

Ronstan’s CL8 Breathable Regatta Smock utilizes the latest highperformance 

materials and outstanding design innovations to keep 

sailors as warm, comfortable and dry as possible on the water. 

Waterproof, lightweight and breathable Rtech3 fabric, combined with 

improved snug-fitting body shape fit, make Ronstan’s eye-catching 

smock ideal for more competitive dinghy, keel boat and catamaran 

racing. The protection and comfort of the CL8 Regatta Smock are 

maximized by: 

• A waterproof and breathable shell that features fully taped 

seams for maximum protection and warmth. 

• A front-opening, water resistant zip that gives 

advanced water protection in cold conditions, while 

the gusset-free design allows superior ventilation in 

warmer situations. 

• The neoprene waist band features a non-slip finish 

that prevents ride-up and water wicking. 

• The micro-mesh lining provides a captive air layer for temperature control 

and comfort. 

• Comfortable stretch cuff and neck seals ensure a perfect fit and minimum water ingression. 

• The action cut means a closer fit while still giving full freedom of movement. 

• Two external, self-draining chest pockets for advanced access and storage capabilities when wearing a 

life jacket. 

$110.25 

21-4700 XX-Small 

21-4701 X-Small 

21-4702 Small 


A. GUL BREATHABLE WIND TOP 

This is one of the lightest spray tops of its kind 

and provides spray and UV protection without 

overheating. Key features: 

• GCX2 2-layer fabric for a lightweight, breathable 

and waterproof garment. 

• 100% waterproof heat taped seams. 

• Adjustable polyurethane collar and wrist seals 

to reduce water flush. 

• Neck gusset makes it easy to get in and out of 

and provides venting when necessary. 

• Secure chest pocket with drain holes. 

• Fully adjustable neoprene waistband. 

• Assorted colors as available. 

$129.00 

36-0070-2 Small 

36-0070-4 Medium 

36-0070-7 Large 

36-0070-8 X-Large 

36-0070-9 XX-Large 

Boots & Neoprene Cap ................... pg 12 

Dry Suit Care ............................................. 7 

Gloves ..........................................................13 

Replacement Seals ................................... 7 

8 CROSS-SPORT ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

A 

21-4707 Large 

21-4708 X-Large 

21-4709 XX-Large 

B 

B. GUL WIND TOP 

A great inexpensive spray top to wear over 

farmer john wetsuit for catamaran sailing and 

kayaking. Key features: 

• GCX waterproof fabric. 

• Adjustable neoprene collar 

• Neck gusset makes it easy to get in and out of 

and provides venting when necessary. 

• Secure check pocket with drain holes. 

• Elasticized waistband. 

• Adjustable polyurethane wrist seals to reduce 

water flush. 

Silver Navy Red 

$49.95 $55.00 $55.00 

Jr Small N/A 38-5460 38-5470 

Jr Medium 38-5451 38-5461 38-5471 

Jr Large 38-5452 38-5462 38-5472 

Small 38-5454 38-5464 38-5474 

Medium 38-5456 38-5466 38-5476 

Large 38-5458 38-5468 38-5478 

X-Large N/A 38-5469 38-5479

HINTS FOR STAYING COMFORTABLE 

• Dress for the conditions and layer as 

necessary. 

• Wear underwear that “wicks” moisture 

away from your skin (polypro, wool). 

• “Vent” (open zipper for a few seconds) 

suit between races or as appropriate 

and safe.* 

• Add or remove a warm (wool, neoprene, 

polypro) hat or cap to balance 

temperature. 

• Return to shore ASAP if you feel that 

you are not going to be comfortable. 

* Warning: Do not sail with dry suit zipper open! 

If you capsize and suit fills with water, you will be 

in real danger! 

LAYER FOR WARMTH AND COMFORT 

• Short or long-sleeve rash guards (see 

pg. 10). 

• Gul fleece: purpose designed for wearing 

under your dry suit. 

ACCESSORIES ADD WARMTH 

Boots (see page 12) 

If your boots seem too small to accommodate 

your new latex dry socks, consider 

purchasing a pair of boots one size larger. 

Gloves (see page 13) 

Gul Dry Gloves give a real waterproof seal 

with dry suit wrist cuffs. 

Cap or Hood (see page 12) 

A neoprene cap or hood is the easiest way 

to control up to 20% heat loss or retention. 

GUL ONE-PIECE SPRAYSUIT 

Lightweight but durable one-piece suit features: 

• GCX waterproof fabric. 

• Adjustable neck seal 

• Two-way zip with storm flap. 

• Elastic waist panel for better fit and comfort. 

• Adjustable polyurethane wrist seals. 

• Self-draining pocket on thigh. 

• Reinforced seat and knee wear areas. 

• Silver/Navy. 

• Limited stock available. 

$89.00 

38-5502 Jr-Large 


38-5508 Large 

38-5509 X-Large 

Photo courtesy of Gul 

GUL FLEECE CHEST-HIGH PANTS 

200g polar fleece pants feature elastic ankles 

with foot loops, suspenders and a 2-way front 

zip. Flatlock stitched for comfort. 


36-0331 X-Small 

36-0332 Small 

36-0334 Medium Thermal Leggings 

(NOT AS PICTURED) 

36-0337 Large 

36-0338 X-Large 

GUL FLEECE LONG SLEEVE TOP 

200g polar fleece top features crew neck and 

elastic cuffs. Flatlock stitched for comfort. 

Limited to stock on hand. 


36-0321 X-Small 

36-0322 Small 


36-0327 Large 

36-0328 X-Large 

SAILING SUITS 

GUL RADIATION UNDERSUIT 

Stay warm and comfortable when you wear this 

quick-dry, breathable polar fleece full suit under 

your drysuit. The Radiation undersuit features 

a crew neck, full-length 2-way zipper, elastic 

waist at back, elastic wrists and ankles, and foot 

loops to prevent the suit from riding up during 

movement. 

$79.95 

36-0341 X-Small 

36-0342 Small 


36-0347 Large 

36-0348 X-Large 

GUL SAILING SUIT SIZE CHART 

Size Height Chest Inside Leg 

Jr-S 4'3" (129 cm) 26"-29" (66-73 cm) 22" (56 cm) 

Jr-M 4'7" (141 cm) 31"-34" (78-86 cm) 24" (62 cm) 

Jr-L 5' (153 cm) 32"-34" (80-87cm) 27" (68 cm) 

S 5'5" (165 cm) 34"-38" (86-96 cm) 29" (74 cm) 

M 5'9" (175 cm) 38"-42" (95-107 cm) 31" (79 cm) 

L 6'1" (185 cm) 42"-44" (107-111 cm) 33" (84 cm) 

XL 6'4" (195 cm) 44"-46" (111-117 cm) 35" (89 cm) 


9

DRYSHIRTS & RASH GUARDS ULTRA-THIN WETSUITS 

LONG SLEEVE DRYSHIRT 

The revolutionary fiber and patented synthetic treatment in the Dryshirt 

make it unique apparel for both the serious racer and recreational cruiser. 

The state-of-the-art material repels water from the outside, but is 

lightweight and breathable, making it ideal for sun and spray protection 

in hot conditions and a perfect base layer in cold weather when feeling 

sticky isn't an option. Sun Protection Factor (SPF) 50. White. Quantity 

discounts and custom screening are available for fleets, teams or other 

organizations. 

$48.50 


38-6012 X-Small 

38-6013 Small 


LONG SLEEVE 

THERMAL RASH GUARD 

$55.00 

37-4311 X-Small 

37-4312 Small 


37-4317 Large 

37-4318 X-Large 

38-6015 Large 

38-6016 X-Large 


38-6018 XXX-Large 

LONG SLEEVE PROWIK SHIRT SPF 50 

Moisture management plus breathability equals total comfort! Prowik® 

shirts are designed to transport moisture away from the body and 

enhance fabric drying rate, keeping you feeling cool, dry and more 

comfortable in hot and humid weather. In cold weather, ProwiK® is a 

great first layer, keeping bone-chilling perspiration away from your skin 

and moving it to the outer layers for evaporation. ProwiK® is fast drying, 

breathable, and resists fading, shrinking and wrinkling. SPF 50. Titanium 

color. 

$55.00 

38-6123 Small 


38-6125 Large 

38-6126 X-Large 


RASH GUARDS 

Polypro Thermal Rash Guards: Add 1-2mm warmth 

equivalent with more comfort and less restriction. Black. 

Lycra Rash Guards: Make entering wetsuits easier and more 

comfortable. Cat and dinghy sailors may want to wear over 

harness and life jacket to prevent “snagging.” White with blue 

stitching. 

LONG SLEEVE 

UV-SHIELD LYCRA 

RASH GUARD 

$37.00 

37-4100-2 Small 

37-4100-4 Medium 

37-4100-7 Large 

37-4100-8 X-Large 

KIDS' WETSUITS 

Additional Dryshirt colors: 

Use size codes at left. 

38-609_ Gray in sizes XS-XXL 

38-602_ Navy in sizes XS-XXL 

Wear a rash 

guard as an 

outer layer to 

help prevent 

snagging. 

SHORT SLEEVE 

LYCRA RASH GUARD 


$25.95 

37-4000-1 X-Small 

37-4000-2 Small 

GUL KIDS' 3/2MM F/L WETSUITS 

Gul’s kids' “Response” wetsuits offer all-around technical features and style, performance 

and value. The Response features stretch panels for flexibility, Dura-Skin knees for 

durabililty, and Smooth Skin Bodyzones for extra warmth when exposed to a breeze. 

Graphic lines add extra style. 

Shorty Full 

$69.95 $89.95 

XX-Small 36-6600-0 36-6960-0 

X-Small 36-6600-1 36-6960-1 

Small 36-6600-2 36-6960-2 

Medium 36-6600-4 36-6960-4 

Large 36-6600-7 36-6960-7 

X-Large 36-6600-8 36-6960-8 

XX-Large 36-6600-9 36-6960-9 

KIDS' WETSUIT SIZING 

Size Code Height Chest Waist Hips 

XXS 0 3'5" 23" 22" 24" 

XS 1 3'10" 25" 23" 26" 

S 2 4'0" 26" 23.5" 27" 

M 4 4'5" 28" 24" 29" 

L 7 4'7" 29" 25" 30" 

XL 8 5' 31" 26.5" 32" 

XXL 9 5'2" 32" 27" 33" 

ULTRA-THIN WETSUITS 

For active in- or on-the-water sports such as kite and windsurfing, surfing, stand-up paddling 

or whitewater kayaking, ultra-thiin wetsuits are THE antidote for sunburn, wind chill, spray and 

water chill and/or for use as an under layer to add warmth to your wetsuit. 

Use as warm rash guards or ultra-lite versions of wetsuits. The unique Metalite inner “skin” (on 

all but the John and Jane) seals out the water and directly reflects heat back to the wearer. 

As an outer layer, they provide 100% protection from harsh UV rays or sunburn and are ideal in 

defending against wind and water chill while providing “board-rash” protection. 

As an inner layer, 0.5mm choices add 2mm warmth with much greater mobility by sealing 

out cold water that usually enters through a zipper. They also extend the temperature range and 

versatility of 3mm wetsuits, sometimes eliminating the need for a heavier wetsuit. 

A B 

C-SKIN 0.5MM 

SHORT SLEEVE T 



37-1101 X-Small 

37-1102 Small 


37-1107 Large 

37-1108 X-Large 

GUL 2MM SHORTS 

Shorts are constructed of 2mm 

titanium-2 neoprene with 

flatlock seams. Pull-cord with 

barrel lock at waist gives extra 

security. 

$45.00 

37-1202 Small 


37-1207 Large 

37-1208 X-Large 

A-B. 2MM LONG JOHN & JANE 

Wear this suit by itself or layer for versatility. 

It is 2mm thick for freedom of movement and 

has a combination of nylon-II neoprene and 

skin-out body panels to reduce evaporative 

cooling. There are titanium seals at the arm, 

leg and neck openings. A heavy weave neo 

seat material increases durability. Tuff-Skin 

knee pads provide protection and ankle zips 

make getting in and out of the suit easier. 

$99.95 

A. Men's Long John 

37-1712 Small 


37-1717 Large 

37-1718 X-Large 


37-1719X XXX-Large 

B. Women's Long Jane 

37-1721 X-Small (5-6) 

37-1722 Small (7-8) 

37-1724 Medium (9-10) 

37-1727 Large (11-12) 

37-1728 X-Large (13-14) 

C-SKIN 1.5MM 

LONG SLEEVE 

SHORTY 

Back zip. Limited sizes available. 


37-1601 X-Small 

37-1602 Small 


37-1607 Large 

0.5MM LONG SLEEVE TOP 

Limited sizes available. Style may 

vary from photo. 

37-1301 X-Small $39.00 


GUL LADY 

5/4/3MM B/S TI-2 

STEAMER 

The Axis steamer is 

Gul’s best multisport 

wetsuit for 

ladies. It will make 

you look and feel 

great, even in cold 

water. Dura-Flex and 

Smooth-Skin panels 

prevent wind chill and 

help you to stay in the 

water longer. Features 

Titanium-2 neoprene 

with 60% G-Flex for 

superior warmth and 

flexibility. Limited to 

stock on hand. 


36-1227-1 Women's X-Small 

36-1227-7 Women's Large 

GUL 3/2MM F/L SHORTY 

Adult “Response” shorty 

wetsuits offer allaround 

technical 

features and style, 

performance 

and value. The 

Response features 

stretch panels for 

flexibility and Smooth 

Skin Bodyzones for extra 

warmth when exposed 

to a breeze. Graphic 

lines add extra style. 

$89.00 

Men's Sizes 

36-1213-2 Small 

36-1213-3 Small/Medium 

36-1213-4 Medium 

36-1213-6 Medium/Large 

36-1213-7 Large 

36-1213-8 X-Large 

36-1213-9 XX-Large 

GUL WETSUIT TERMS 

B/S: Blindstitched seams are also glued 

and effectively keep most water out. 

F/L: Flatlock seams are smooth, strong 

and comfortable with some leakage. 

3/2mm: Combination of 3mm (torso) 

and 2mm (arms) neoprene. 

Ti-2 : Newest titanium technology reflects 

body heat to keep you warm. 

Liquid Taped Seams: Blindstitched 

seams that are coated with an additional 

layer of glue inside the suit. 

Dura-Skin Neoprene: The “skin” is 

a smooth or textured outer surface that 

sheds water. Inside is lined with nylon. 

G-FLEX: Super stretchy neoprene permits 

less restricted range of movement and 

comfort compared to the standard grade of 

neoprene used on less expensive wetsuits. 


XS / US 6 1 5'5" - 5'6" 32" - 34" 24" - 26" 34" - 36" 

S / US 8 2 5'6" - 5'7" 34" - 36" 26" - 28" 36" - 38" 

M / US 10 4 5'7" - 5'8" 36" - 38" 28" - 30" 40" - 42" 

L / US 12 7 5'8" - 5'9" 38" - 40" 30" - 32" 42" - 44" 

XL / US 14* 8 5'8.5" - 5'9.5" 40" - 42" 32" - 34" 44" - 46" 

*Not available in all styles. Some suits may be special order. 

WETSUITS 

CROSS-SPORT WETSUITS SPECIALIZED WETSUITS: SAILING, KAYAKING, PWC 

GUL 3/2MM B/S TI-2 STEAMERS 

These are the most versatile, 

mid-weight 

cross-sport 

wetsuits. Use 

for surfing, 

sailing, 

kite and 

windsurfing 

and standup 

paddling 

in colder 

conditions. 

All feature 

Titanium-2 

neoprene and, for 

added warmth, 

waterproof and 

comfortable blindstitch 

construction 

and Smooth-Skin 

Bodyzones for 

extra warmth 

when exposed to 

a breeze. Men's Gul Profile 1203 wetsuits feature 

60% G-Flex neoprene and Liquidseam construction 

for added waterproof strength. Women's 

Gul Response 1203 suits feature G-Flex neoprene 

panels for added flexibility and are limited to 


Men's Women's 

$229 .00 $129.00 CLOSEOUT 

X-Small NA 36-1237-1 

Small 36-1140-2 NA 

Small/Med 36-1140-3 NA 

Medium 36-1140-4 36-1237-4 

Med/Large 36-1140-6 NA 

Large 36-1140-7 NA 

X-Large 36-1140-8 NA 

MEN’S WETSUIT SIZES 


S 2 5'4"- 5'6" 34" - 36" 27" - 29" 32" - 34" 

S/M 3 5'6"- 5'8" 36" - 38" 29" - 31" 34" - 36" 

M 4 5'8"- 5'10" 38" - 40" 31" - 33" 36" - 38" 

M Tall 5 5'10"- 6'0" 38"- 40" 31" - 33" 36" - 38" 

M/L 6 5'10"- 6'0" 40" - 42" 33" - 35" 38" - 40" 

L Short* 7 5'8" - 5'10" 42" - 44" 35" - 37" 40" - 42" 

L 7 6'0" - 6'2" 42" - 44" 35" - 37" 40" - 42" 

XL 8 6'2"- 6'4" 44" - 46" 37" - 39" 42" - 44" 

XXL* 9 6'2"- 6'4" 46" - 48" 39" - 40" 44" - 46" 

WOMEN’S WETSUIT SIZES 

GUL 3MM PADDLE & SAIL LONG JOHN 

Gul’s long john has a front zip for easy entry and comfort when worn with a 

life jacket and/or a harness. They also feature: 20% X-Flex/80% Dura-Flex; 

X-Flex side panels for freedom of movement; flatlock seam construction; 

breathable airprene back panel for comfort; two-way front zip; smooth 

skin to minimize wind chill; Titanium 2 reflects body heat back inward; DKS 

highly-durable knee print; Dura-Tex for increased durability in wear areas; 

and DWR thighs. Men's sizes only. 

$139.00 

36-0050-2 Small 

36-0050-3 Medium/Small 

36-0050-4 Medium 

36-0050-5 Medium Tall 

36-0050-6 Med/Large 

36-0050-7 Large 

36-0050-8 X-Large 

36-0050-9 XX-Large 

GUL 3MM TI-2 MARINE SHORTY 

These wetsuits feature front zips for easy 

entry and comfort when worn with a life 

jacket and/or a harness. They are cut longer 

in back to accommodate sitting positions. 

The back “Airprene” neoprene is vented for 

breathability and comfort. Highly abrasionresistant 

“Dura-Tex” seat reinforcements will make these wetsuits outlast 

all others! Men's sizes only. 

$139.00 

36-0045-2 Small 

36-0045-3 Medium/Small 

36-0045-4 Medium 

36-0045-6 Medium/Large 

SPECIALIZED WETSUITS: 

KITE BOARDING & WINDSURFING 

36-0045-7 Large 

36-0045-8 X-Large 

36-0045-9 XX-Large 

GUL MEN'S DELTA 

5/4/3MM B/S TI-2 

STEAMER 

Gul's ultimate winter kite and 

windsurf suit built with and for 

Gul’s world-class team riders. 

Constructed with 100% of the 

new X-Flex Smooth Skin and 

DuraSkin neoprene for maximum 

freedom of movement and 

minimum wind chill. Features 

Liquidseam seals, Pro-Neck single 

layer neck seal, two-part cuff seals 

and adjustable ankle seals. 

$299.00 

36-1263-2 Men's Small 

36-1263-3 Men's Small/Medium 

36-1263-4 Men's Medium 

36-1263-5 Men's Med/Tall 

36-1263-6 Men's Med/Lg 

36-1263-7 Men's Large 

36-1263-8 Men's X-Large 



11

BOOTS KNEE PADS, CAPS & HATS 

WARMERS 5MM BOOTS WITH FIRM SOLE & ZIP 

These heavy duty boots have added ankle and sole support and deep, grippy non-slip treads give solid 

protection for any type of boating. They are constructed of 5mm stretch nylon II neoprene with a 7mm 

inner sole for extra warmth and protection. Excellent support for trapezing is provided by 

the stiff, compression-molded sole with built-in arch. The black boots feature a noncorrosive 

#10 delrin, heavy-duty zipper, reinforced rubber toe and heel cap, 

and glued and blindstitched seams and they come in a 

handy, reusable mesh bag. Sizes run true to size. 

$39.95 

GUL TI-2 5MM STEAMER BOOTS 

Purpose designed for windsurfing and kiteboarding. Thinner soles 

allow feel required for board sports, but they are still good for 

all-around use. Round toes and poly-twill foot tops are designed 

for use with footstraps. Neoprene uppers are reinforced at heels 

and toes. Arch straps prevent ballooning and foot roll issues. 

Men's sizing runs large. Women should order 2 sizes smaller 

than normal shoe size. 

$55.00 

38-5120-4 Size 4-5 

38-5120-5 Size 5-6 

38-5120-6 Size 6-7 

38-5120-7 Size 7-8 

38-5120-8 Size 8-9 

GUL TI-2 3MM STRAPPED SLIPPERS 

With thinner soles, these slippers are purpose designed for windsurfing 

and kiteboarding, but they are also good for all-around use. 

Round toes and poly-twill foot tops are designed for use with 

footstraps. Neoprene uppers are reinforced at 

heels and toes and are ideal for crawling on 

catamaran tramps. Arch straps help hold 

slippers in place. Men's sizing runs a half size 

large. Women should order 2 sizes smaller than normal shoe size. 

$45.00 

38-5130-5 Size 5-6 

38-5130-6 Size 6-7 

38-5130-7 Size 7-8 

38-5130-8 Size 8-9 

38-5130-9 Size 9-10 

38-5130-10 Size 10-11 

38-5130-11 Size 11-12 

38-5130-12 Size 12-13 

GUL 3MM POWER SLIPPERS 

Economical foot protection! Gul's Power Slippers have thin soles, round toes, and neoprene uppers that are 

reinforced at heels and toes . An adjustable cord at the foot 

top aids in keeping the slippers in place. Men's sizing runs 

a half size large. Women should order 2 sizes smaller 

than normal shoe size. 

$30.00 

38-4105 Size 5-6 

38-4106 Size 6-7 

38-4107 Size 7-8 

38-4108 Size 8-9 

38-4109 Size 9-10 

38-4110 Size 10-11 

38-4111 Size 11-12 

38-4112 Size 12-13 

38-4113 Size 13-14 

37-5205 Size 5 

37-5206 Size 6 

37-5207 Size 7 

37-5208 Size 8 

37-5209 Size 9 

38-5120-9 Size 9-10 

38-5120-10 Size 10-11 

38-5120-11 Size 11-12 

38-5120-12 Size 12-13 

38-5120-13 Size 13-14 

37-5210 Size 10 

37-5211 Size 11 

37-5212 Size 12 

37-5213 Size 13 

RONSTAN SAILING BOOTS WITH ZIP 

Ronstan’s CL63L Sailing Boots are comfortable and ultra-light for mild 

climates and freedom of movement. They have a traditional razor-cut 

sole for positive grip and side zippers for easy fitting. They feature a 

durable rubber outer with neoprene lining for warmth 

and comfort. The reinforced neoprene upper is good 

for hiking. 

$48.65 

21-6305 Size 5 

21-6306 Size 6 

21-6307 Size 7 

21-6308 Size 8 

21-6309 Size 9 

21-6310 Size 10 

21-6311 Size 11 

CHOOSING THE RIGHT BOOTS 

First, it's all about “sole”: 

• Cat Sailors: Thicker and stiffer soles 

provide needed support. 

• Paddlers: Thicker and stiffer are best for 

walking on rocks. 

• Windsurf and Kite: Thinner is better for 

feel; round toes are less likely to catch on 

footstrap. 

• Surf: Thinner sole with split toe permits 

most natural feel and balance. 

Boot “uppers” are important, too: 

• Cat: Reinforced toes for crawling, side 

zips for easy entry and exit. 

• Paddle: Same as cat, but less critical. 

• Windsurf and Kite: Tops should be 

suitable for footstraps, plus arch strap 

to prevent boots from ballooning with 

water. 

• Surf: Issues are warmth, “ballooning” 

and toe (end/top) wear. 

WATER BLOCKER SOCKS 

Features an in-cuff seal that effectively blocks 

water from entering over the top of the stock. 

Constructed of 3 materials in a seamless design. 

Wear with boots to keep your feet dry. Add wool 

or polypro socks inside Water Blocker Socks to 

add warmth. Limited to stock on hand. 

$39.95 

38-3204 X-Large– Fits Men's 12-13 

GUL 3MM PEAKED SURF CAP 

Gul's cap is constructed 

of titanium-lined 3mm 

neoprene and 

features an integral 

chin strap plus a 

visor to deflect 

water from the face 

and provide shade. 

$29.95 

36-5340-2 Small 

36-5340-4 Medium 

36-5340-7 Large 

Gloves ................................................... pg 13 

Sailing Suits ............................................. 8-9 

Wetsuits ................................................10-11 

GUL PRO KNEE PADS 

Protect your knees! Gul's black knee pads are 

constructed of 2mm double-lined neoprene with 

hard-wearing, flexible, textured, kevlar knee 

protection. Pair. Measurement is 2" above the 

knee. Size XL has extra-long straps. 

$39.95 

34-4101 Small – Fits 15"-18" 

34-4102 Medium – Fits 16"-19" 

34-4103 Large – Fits 17"-20" 

34-4104 X-Large – Fits 20"+ $49.95 

DA KINE SURF TRUCKER CAP 

Designed for 

water use, Da Kine’s 

trucker-style Surf 

Cap has a performance 

mesh 

back and an 

adjustable 

chin strap. 

One adjustable size. 

$20.00 

32-4402 Black 

32-4403 Khaki 

DA KINE INDO HAT 

Da Kine’s Indo floating hat is designed for water 

use. It iis constructed 

of SPF 

quick-dry fabric 

with mesh 

ventiliation 

and 

features an 

adjustable chin strap 

and a brim that flips 

up for padding. It has removable neck protection 

that stores in the hat. One size. 

$29.00 

32-4406 Black 

32-4407 Gray 

OCEAN RODEO NEO CAP 

This beanie-style cap is easy to put on and keeps 

your head warm. Two 

small grommet 

holes enable 

you to add your 

own lanyard 

for extra security. 

Limited to 



36-5341 Small 


36-5343 Large 


CHOOSING THE RIGHT GLOVES 

Gloves prolong sailing by protecting your 

hands. Sailing Gloves for catamaran 

and dinghy sailing have palms with 

special reinforcement for handling 

sheets. Kiteboarding, Windsurfing 

or Paddling Gloves have no reinforcing 

and are therefore thinner, making the bar, 

boom or paddle easier to hold. When extra 

warmth is needed, choose Gloves with 

Neoprene, with the amount of neoprene 

dependent on the severity of conditions. 

GLOVE SIZE GUIDELINES 

Measure the width of your palm just above 

your thumb. 

XS = 2-7/8" 

Small = 3-1/8" 

Medium = 3-1/2" 

Large = 3-3/4" 

X-Large = 4-1/8" 

XX-Large = 4-1/2" 

HARKEN BLACK MAGIC 

CLASSIC SAILING GLOVES 

Catamaran & Dinghy 

The superior grip of these all-purpose, warmweather, 

3/4-finger gloves lets sailors hand hold 

sheets longer with less fatigue. The material 

doesn't curl back on fingers and it wears better 

than standard synthetic leathers, staying soft 

after drying. Flexible nylon/Spandex mesh back. 

$29.95 

28-2385 X-Small 

28-2386 Small 


RONSTAN “STICKY” RACE GLOVES 


Ronstan's “Sticky” gloves reduce fatigue by minimizing the physical effort required to hold rope. They are 

constructed of Amara® synthetic leather for maximum durability, minimum stretch and shrinkage, and 

are double-stitched with Aramid thread in high wear areas. Double-thick palm and fingers add protection 

and grip, while mesh panels ensure flexibility and comfort. Choose 1/2-Finger gloves for cool and com- 

fortable dexterity; choose 3-Finger gloves for extra warmth and protection. Size XXS = ladies' small. 

RONSTAN 1/2-FINGER $34.65 


21-4840 X-Small 

21-4841 Small 


21-4843 Large 

21-4844 X-Large 


28-2388 Large 

28-2389 X-Large 


GUL NEOPRENE SAILING GLOVES 


These Gul gloves have a neoprene back and a curved anatomic cut that gives optimum fit. Amara palm 

with foam padding and a grip patch provide a good, comfortable grip. Adjustable hook and loop wrist 

closure. Choose full-finger style for maximum warmth and protection. 

GUL 1/2-FINGER $34.95 

15-7213 X-Small 

15-7214 Small 


15-7216 Large 

15-7217 X-Large 

HARKEN REFLEX SAILING GLOVES 


Sticky, abrasion-resistant Black Magic® palm and 

finger wraps provide superior grip while maintaining 

dexterity and freedom of movement. 

Stretch-woven material and molded-rubber 

guard strips across the back provide lightweight 

protection. Reflex gloves also feature protective 

palm pad, molded-rubber wrist closure, pull-on 

tab for easy on/off, reinforced fingertips, and 

mesh vents at base of fingers. 

$38.95 

28-2083-1 Small 

28-2083-2 Medium 

RONSTAN 3-FINGER $38.00 

21-4850 X-Small 

21-4851 Small 


21-4853 Large 

21-4854 X-Large 


28-2083-3 Large 

28-2083-4 X-Large 

GUL FULL-FINGER “WINTER” $45.00 


15-6003 X-Small 

15-6004 Small 


WARMERS HALF-FINGER 

WARMERS NEO-MESH GLOVES 


This neo-mesh glove offers protection against 

the wind and water, while allowing excellent 

ventilation and dexterity. Lightly padded palm 

and reinforced high wear areas prevent blisters 

and add durability. Half-finger design enhances 

control and use of the hands, while the hook and 

loop wrist closure dials in the fit. . 

$24.95 

15-2113 X-Small 

15-2114 Small 


15-2116 Large 

15-2117 X-Large 


Skamokawa Regatta 2006 Photo: Sue Wood 

GLOVES 

GUL NEOPRENE DRY GLOVES 

All Watersports 

The ultimate dry construction! 2.5mm neoprene 

and liquid seams keep your hands warm and 

dry. Double smooth seals and adjustable hook 

and loop closures at wrists give added security. 

Polyurethane palm grips provide durability. 


$39.95 

15-6274 Small 


15-6276 Large 

15-6277 X-Large 

DA KINE HALF-FINGER GLOVES 

Kite, Windsurfing & Paddling 

Da Kine's half finger gloves 

are extremely comfortable 

and flexible. The non-slip 

palm material offers 

protection and grip, 

while quick-dry 

Lycra backs offer 

flexibility and sun 

protection. These 

gloves feature a 

compression molded neoprene back panel and 

breathable mesh for maximum comfort. The 

half-finger design helps maintain dexterity. 

Gloves fasten with hook and loop closure. 

$29.00 

32-1514 X-Small 

32-1515 Small 


32-1517 Large 

32-1518 X-Large 

DA KINE FULL-FINGER GLOVES 

Windsurfing & Kite 

These gloves offer maximum 

protection and warmth. The 

non-slip palm material 

offers comfortable and 

durable protection and 

grip for maximum 

performance. 

A compression 

molded neoprene 

back panel and 

breathable mesh 

give maximum 

comfort. Gloves fasten 

with hook and loop closure. 

$32.00 

32-1520 Small 


32-1522 Large 

32-1523 X-Large 


13

FASTENERS 

SCREWS 

Measurements shown are diameter and 

threads per inch times grip length. Selftapping 

screws are measured diameter 

times length. 

MACHINE SCREWS 

Round head. Stainless. 

19-3500 #10-32 x 7/8" $.40 

19-3501 #10-32 x 1/2" $.32 

19-3510 #10-24 x 7/8" 

Phillips $.36 

19-3511 #10-24 x 1" 

Phillips $.42 

19-3520 #12-24 x 1-1/4" $1.10 

19-3530 5/16"-18 x 1-1/4" $1.40 

19-2912 #10-32 x 3/4" $.34 

19-2915 #10-32 x 1" $.36 

Flat head. Stainless unless noted. 

19-1510 #6-32 x 1/2" Brass $.14 

19-1515 #8-32 x 3/8" $.16 

19-1516 #8-32 x 3/4" $.25 

19-1517 #8-32 x 1" $.30 

19-1518 #10-32 x 1" $.50 

Pan head. Stainless with Phillips head unless 

noted. 

19-2905 #6-32 x 7/8" 

Brass, Slot Head $.50 

19-2910 #10-32 x 5/8" $.36 

19-3010 #10-24 x 3/8" $.24 

19-3012 #10-24 x 1-1/8" $.88 

19-3011 #10-24 x 1-1/2" $.50 

19-2916 #10-32 x 7/8" Slot $.35 

19-2918 #10-32 x 2" $.55 

19-3019 1/4"-20 x 1/2" $.60 

19-3020 1/4"-20 x 7/8" Slot $.70 

SELF-TAPPING SCREWS 

Round head. Stainless. 

19-3710 #10 x 1-1/4" $.56 

19-3711 #10 x 1-1/2" $.52 

19-3713 #10 x 2" $.60 

19-3714 #10 x 2-1/2" $.85 

Flat head. Stainless. 

19-1620 #8 x 1" $.34 

19-1622 #8 x 1-1/2" $.32 

19-1624 #8 x 2" $.38 

19-1626 #10 x 1-1/2" $.36 

19-1625 #12 x 3/4" $.40 

Pan head. Stainless. Phillips. 

19-1619 #8 x 1" $.30 

19-1623 #8 x 1-1/2" $.35 

19-3209 #10 x 1/2" $.32 

19-3210 #10 x 3/4" $.30 

19-3211 #10 x 1" $.34 

19-3220 #12 x 1" $.46 

Oval head. Stainless. Phillips. 

19-3225 #10 x 3/4" $.36 

19-3230 #12 x 3/4" $.42 

Use a marine-grade silicone sealant to 

prevent water intrusion, corrosion and to 

insulate around fasteners. 

HEX NUTS 

First number of measurement shown is 

diameter; second number is threads per inch. 

HEX NUTS 

19-2010 #6-32 Brass $.15 

19-2016 #8-32 Stainless $.16 

HEX NUTS WITH NYLOCK INSERT 

Stainless hex nut with nylock insert will not rust 

or work loose if properly installed. 

19-2510 #10-24 (thin) $.40 

19-2515 #10-32 (thick) $.40 

19-2516 1/4-20 $.45 

19-2520 5/16-18 $.50 

19-2522 8mm $.60 

19-2524 3/8-16 $.80 

19-2531 1/2-13 

(H-16 Pylon) $3.20 

BOLTS 

Measurements shown are diameter in 

inches and threads per inch x length of shaft. 

STAINLESS BOLTS 

19-2220 1/4-20 x 2" Hex Head $1.00 

19-2221 1/4-20 x 2-1/4" Hex Head $1.20 

(P16/18 Rudder Bolt) 

19-2222 1/4-20 x 2-1/2" Allen Head 

(Prindle Tiller Connector) $2.20 

19-2224 1/4-20 x 3-1/2" Hex Head $2.15 

19-2226 1/4-20 x 5" Hex Head 

(H-18 Mast Rotation Arm) $2.70 

19-2227 1/4-20 x 4-1/2" Hex Head 

(Mast Bolt for H-20) $2.30 

19-2229 5/16-18 x 1-1/2" Hex Head 

(Beam Strap Bolt for Nacra) $1.50 

19-2230 5/16-18 x 2-1/4" Hex Head $1.60 

19-2231 5/16-18 x 2-1/2" Hex Head 

(Rudder Bolt –all Hobies ® ) $2.20 

19-2232 5/16-18 x 3" $2.40 

19-2235 5/16-18 x 3-3/4" Hex Head $2.60 

19-2237 5/16-18 x 4-1/2" Hex Head 

(Prindle Mast Rotation Arm) $2.90 

19-2210 8mm x 30 mm (1-1/8") 

Hex Head $1.80 

19-2240 1/2-13 x 3-3/4" Hex Head 

(H-16 Pylon) $5.00 

19-2239 3/8-16 x 2-1/2" Hex Head 

(Nacra/Prindle Crossbar) $2.30 

FLAT WASHERS 

Stainless. 

19-4016 1/4" Thin – 1/4" ID x 1/2" OD $.10 

19-4018 5/16" – 3/8" ID x 11/16" OD $.20 

19-4011 #10 – 3/16" ID x 9/16" OD $.20 

19-4014 #10 SAE $.20 

CHANNEL INSERT 

Use as a nut for mounting a cleat to 

mast luff track. Stainless. #10-32. 

03-0190 $2.00 

Ball-Lok Pins ...................................... pg 31 

Channel Inserts ........................................68 

Clevis Pins & Retainers ...........................31 

RIVET ID CODE 

1st Letter = rivet material 

A = Aluminum 

C = Stainless Steel 

M = Monel 

S = Steel 

2nd Letter = mandrel material 

A = Aluminum 

C = Stainless Steel 

M = Monel 

S = Steel 

3rd Letter = head style 

P = Pan Head 

C = Countersunk 

1st Number = Rivet diameter in 32nds of 

inch 

2nd Number = Grip length in 16ths of inch; 

Maximum thickness of 

material for which the rivet is 

intended 

PAN HEAD RIVETS 

CINCH RINGS 

Use shock cord seizing pliers for a smooth 

installation; standard pliers can give a 

suitable cinch. 

CINCH RINGS 

Stainless steel. Each. 

20-1030 3/16" (5mm) $.14 

20-1040 1/4" (6mm) $.14 

20-1050 5/16" (8mm) $.14 

20-1060 3/8" (10mm) $.14 

SHOCK CORD PLIERS 

For all cinch rings up to 1/2". Closes stainless 

cinch rings completely without burring. Made of 

plated, case-hardened steel. Spring grip. 

33-0010 $19.00 

HAND RIVETER 

This rugged and easy to use riveter includes four 

interchangeable nosepieces to set 3/32", 5/32" 

and 3/16" diameter rivets. It will even pull stainless 

rivets! Nosepieces screw into steel inserts. 

The molded grip gives extra-firm, no-slip control. 

Jaws are replaceable. 

33-39000 HP-2 Hand Riveter $45.00 

33-39123 Replacement Jaws. Pair $8.00 

A standard 3/32" stop sleeve (#02-1031) 

can act as an extended nose on the hand 

riveter when installing countersunk rivets in 

Hobie ® main and jib traveler tracks. 

14 CROSS-SPORT ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

Rounded. 

19-5009 AAP 4-6 1/8" x 3/8" $.18 

19-5011 AAP 6-4 3/16" x 1/4" $.24 

19-5012 AAP 6-6 3/16" x 3/8" $.25 

19-5030 CCP 4-6 1/8" x 3/8" $.50 

19-5031 CCP 6-4 3/16" x 1/4" $.70 

19-5032 CCP 6-6 3/16" x 3/8" $.75 

19-5033 CCP 6-8 3/16" x 1/2" $.85 

19-5034 CCP 6-10 3/16" x 5/8" $.85 

19-5042 MMP 8-6 1/4" x 3/8" $1.50 

19-5022 MCP 6-6 3/16" x 3/8" $.65 

19-5023 MSP 6-10 3/16" x 5/8" $.65 

COUNTERSUNK RIVET 

For traveler tracks, etc. 

19-5021 CCC 6-4 3/16" x 1/4" $.74 

19-5024 CCC 6-6 3/16" x 3/8" $.74 

CLEWBOARD RIVET 

Aluminum. Set with hammer. 

19-5005 A 4-6 1/8" x 3/8" $.12 

19-5006 A 6-6 3/16" x 3/8" $.18 

STAR RIVET 

As the aluminum is popped, it flares to provide 

a 3-point star backing that holds better in soft 

material. Uses include installation of footstraps 

on catamarans or eyestraps on kayaks. 

19-5015 AAP 6-6 3/16" x 3/8" $1.00 

RIVET CASING 

Stainless casing prevents leaking through 

the center of rivet. Also used to replace 

rivets in worn, oversized holes, as in 

Hobie ® castings and sidebars. For 3/16" diameter 

rivets up to 5/8" penetration. Requires 13/64" 

hole. Suggested for use with #19-5022 (MSP 

6-6) rivets with steel mandrels because they pull 

tighter than rivets with stainless mandrels. 

19-5020 $.70 

Factory replacement fasteners are also available. 

HEAVY DUTY HAND RIVET TOOL 

This rivet tool is large enough to do the job! 

Sets 1/8" - 1/4" diameter rivets in all materials. 

Can also set T-Rivet, Klik-Split ® , Klik-Lock , 

and all other structural blind rivets. Heavy-duty 

construction and longer handles permit access to 

hard-to reach areas. 

33-7903 $89.95 

#4 HANDY SPUR GROMMET KIT 

Set includes a cutter and die set with 24 grommets. 

Use to double grommet the aft lacing strip 

of any trampoline. Order extra grommets for 

center lacing or other projects. 

33-1216 Grommet Kit $34.40 

33-2015 24 Grommets Only $10.00

ROPE COLORS 

Please note that all colors, especially 

tracers, are subject to change. 

SPOOLED ROPE 

All rope and shock cord is sold per foot 

with no minimum length necessary. Unless 

otherwise noted, quantity spool prices start 

at 250 feet (76.2m). Smaller quantities will 

be spooled at our option or if requested. 

Spool = $1.50 

PRICES 

If you find any of these ropes with a 

published price less than ours, we will 

match the price! 

ROPE CUTTING TOOL 

Hand-held hot knife cuts and 

melts line in one operation. 

On/off trigger is easy to use. 

33-199A Rope Cutting Gun with 

Blade $59.95 

33-199B Replacement Blade –1/2" spacing 

$16.50 

ROPE SPLICING KIT 

The only tool for splicing all kinds of rope. Made 

of highly polished stainless steel. Set of 4 fids 

(needles) splices 1/8" to 1/2" braid-on-braid. 

Set of 5 fids splices 1/8" to 9/16" braid-on-braid. 

Fids are also available individually. 

33-0031 Set of 4 

$39.00 

33-0032 Set of 5 

$59.00 

33-0033 1/8-1/4" 

$8.00 

33-0034 1/4-5/16" 

$9.00 

33-0035 5/16-3/8" 

$10.00 

33-0036 3/8-1/2" 

$16.50 

33-0037 1/2-9/16" 

$22.50 

WAXED WHIPPING TWINE 

This whipping twine by 

FSE Robline is made 

of colored polyester 

that is treated with a 

wax. Especially easy 

to handle! Sold per 

90m (295ft) spool. 

39-0008 .08mm White $6.50 

39-0008GR .08mm Green $6.50 

39-0008RD .08mm Red $6.50 

A. 1/2" HOLLOW BRAID 

This coreless line permits easy 

insertion of internal shock cord, 

so it is ideal for cat righting or 

reaching line and windsurfing uphauls. 

Black with blue tracer. Sold per foot. 

39-0861 1/2" (13mm) $1.10 

Halyard & Downhaul Tools ... pg 16, 69 

B-D. DACRON ® SPUN BRAID 

The low-stretch characteristics and soft, fuzzy 

surface of this splieable rope offer excellent grip 

and make it easy on the hands. 100% polyester 

braided core with a spun polyester braided cover. 

Use 5/16" for jib and spinnaker sheet; use 3/8" for 

mainsheet. Per foot. Spool: 250' (76.2m). 

39-0452BK 1/4" (6mm) Black $.80 

39-0551 5/16" (8mm) White $.80 

39-0552BK 5/16" (8mm) Black $.90 

39-0552BL 5/16" (8mm) Blue $.90 

B. 39-0651 3/8" (10mm) White $.95 

C. 39-0652BK 3/8" (10mm) Black $1.20 

D. 39-0652BL 3/8" (10mm) Blue $1.20 

E-G. RACING SHEET BY ROBLINE 

FSE Robline's racing sheet is a composite single 

braid of Dyneema ® SK 75 with nylon added to 

each strand. Dyneema ® gives extreme abrasionresistance 

and very low stretch, while nylon 

adds a nice feel and good handling properties. 

The unique braided construction makes the line 

stay round, even under extreme loads. Ideal for 

multi-part mainsheet systems, spinnaker sheets 

and control lines. Colors are blends with white. 

Sizes run about 15% oversize (e.g. marked 

7mm=5/16"+; marked 9mm=3/8"+). Sold 

per foot. Spool: 656' (200m). 

39-1105BL 5mm Blue $.89 

39-1105OR 5mm Orange $.89 

39-1106BL 6mm Blue $1.29 

39-1106OR 6mm Orange $1.29 

39-1107BL 7mm Blue $1.49 

39-1107OR 7mm Orange $1.49 

39-1107GR 7mm Gray $1.49 

39-1108BL 8mm Blue $1.95 

39-1108OR 8mm Orange $1.95 

39-1108GR 8mm Gray $1.95 

39-1109GR 9mm Gray $2.20 

39-1110GR 10mm Gray $2.99 

H-I. 8-STRAND LOW STRETCH 

The result of design technology combining lowstretch, 

high strength and chafe resistance into 

one rope. Similar to prestretched lines, but its 

softer, less textured finish means less friction in 

multi-purchase systems. Made in the USA. Sold 

per foot. Spool: 250' (76.2m). 

39-2309BK 1/8" (3mm) Black $.32 

H. 39-2310 5/32" (4mm) White $.30 

I. 39-2310BK 5/32" (4mm) Black $.34 

39-2311BK 3/16" (5mm) Black $.42 

39-2312 1/4" (6mm) White $.48 

39-2312BK 1/4" (6mm) Black $.60 

J. ROBLINE SUPER DOWNHAUL LINE 

Specifically designed to handle the extreme high 

loads of large formula sailboard race sails. The 

unique construction keeps the rope round under 

extreme downhaul loads, so it holds extremely 

well in clam-style cleat bases. Smooth 12-plait 

construction and the slippery characteristics of 

100% SK75 Dyneema fiber dramatically reduce 

friction in downhaul purchase systems. This line 

makes rigging easier and will last many seasons 

due to the incredible durability of Dyneema. Per 

foot. Spool length is 100m (328 ft). Per foot. 

39-1309 9/64" (3.8mm) $1.20 

K-M. 8-PLAIT LOW-STRETCH 

Polyester outer is a load-carrying, abrasion- and 

UV-resistant 8-plait weave; polyester core 

minimizes stretch and water absorption. This 

prestretched line works well in clam-style cleats 

and is ideal for high load applications such as 

halyards, outlhauls, downhauls and control lines. 

Per foot. Spool: 328' (100m). 

39-1409BL 5/32" (4mm) Blue $.46 

39-1409RD 5/32" (4mm) Red $.46 

K. 39-1410 3/16" (5mm) White $.50 

L. 39-1410BL 3/16" (5mm) Blue $.60 

M. 39-1410RD 3/16" (5mm) Red $.60 

N-O. SK75 DINGHY CONTROL LINE 

BY ROBLINE 

A high-tech, small-boat racing line with a 

focus on keeping the weight down. The cover 

is high-tech Diolen PES that surrounds a core 

of Dyneema SK75 braid. For a better cover-core 

grip, the core is impregnated with FSE Robline’s 

unique Single Yarn Impregnation System 

(S.Y.I.S.) coating technology. Because of this 

coating, the cover can be stripped off where 

needed to save weight and decrease the diameter. 

White with colored tracer. Per foot. 

39-2420GR 4mm Green $.65 

N. 39-2421YL 5mm Yellow $.94 

O. 39-2422BL 6mm Blue $1.30 

39-2422RD 6mm Red $1.30 

P. STANDARD POLY YACHT BRAID 

A multipurpose Dacron line. Use for main and 

jib halyards or trampoline lacing. Shiny texture, 

double-braided, spliceable. No tracer. Per foot. 

39-3141 1/4" (6mm) $.58 

Q-S. OCEAN 3000 BY ROBLINE 

Single-braided Dyneema ® SK-75 12-strand 

line with a high breaking strength, low weight, 

almost no stretch and a urethane coating for UV 

and abrasion resistance. Kiteboarders use this as 

pre-lines. Also excellent for lacing cat tramps. 

Sold per foot. Spool: 656' (200m). 

Q. 39-2329 1/8" (3mm) Gray $.50 

R. 39-2329BL 1/8" (3mm) Blue $.50 

S. 39-2329RD 1/8" (3mm) Red $.50 

39-2331 3/16" (5mm) Gray $.92 

39-2331BL 3/16" (5mm) Blue $.92 

39-2332 1/4" (6mm) Gray $1.40 

T. DACRON ® SOLID BRAID 

Use for batten tie and roller furling systems. 

Batten tie= about 18" per batten. Sold per foot. 

Spool: 1000' (304.9m). 

39-0221 1/8" (3mm) White $.14 

U. PREMIUM GRADE SHOCK CORD 

This black shock cord is stiffer and its durable 

nylon cover may offer more UV-resistance than 

standard shock cord. Use 3/16" or 1/4" for 

trapeze shock cords; the 3/8" is best for tramp 

lacing. Sold per foot. Spool length: 

1/8", 3/16" and 1/4" – 500' (152.4m) 

5/16" and 3/8" – 300' (91.4m) 

39-7291 1/8" (3mm) $.28 

39-7391 3/16" (5mm) $.44 

39-7491 1/4" (6mm) $.62 

39-7591 5/16" (8mm) $.85 

39-7691 3/8" (10mm) $1.30 


A 

B 

C 

D 

E 

F 

G 

H 

I 

J 

K 

L 

M 

N 

O 

P 

Q 

R 

S 

T 

U 

ROPE 

Use Liquid Rope Whipping for a 

quick and easy way to 

finish any rope 

end. Prevents 

unraveling and forms 

a permanent, clear 

flexible coating. 4 fl. oz. 

40-8490 $12.95 

15

MAINTENANCE 

WEST SYSTEM ® CAT KEELS KIT 

This convenient kit contains the materials, tools, and detailed instructions and re-fairing suggestions for 

rebuilding worn catamaran keels. Epoxy resin is more durable, less brittle, and easier to work with than 

polyester resin. Two pieces of fiberglass cloth (2" x 16' and 3" x 10') are included and can be cut to size. 

Any leftover materials can be used for future repairs. 

40-4105 $99.95 

DING ALL EPOXY STIK 

A specialty epoxy putty that mixes by hand 

kneading in just one minute for permanent 

repairs to damp, wet or dry areas. No measuring! 

Contains a fading blue dye and becomes white 

after mixing. It may be 

applied underwater in 

either fresh or salt water 

and will bond to substrates 

such as fiberglass, 

epoxy, wood, glass and 

metal. Will not yellow when exposed to sunlight. 

30 minute cure time. 4 oz. 

40-4010 $8.50 

WEST SYSTEM ® REPAIR PACKS 

Small kit is great for ding repairs and includes two packets each of 

epoxy resin and hardener, plus filler and instructions. Use large kit 

for dings and delamination repair. It gives you three times as much 

resin, pre-loaded in a self-metering syringe, plus filler and disposable 

gloves. Filler is white when dry. 

40-4101 Small Repair Pack $14.95 

40-4102 Large Repair Pack $36.25 

Shown with optional Mini Pumps. 

MARINE-TEX 

A heavy-duty 

structural 

epoxy that 

simplifies the 

most difficult 

repair. This 

easy-to-use 

white putty 

can be molded 

to any shape. 

Bonds to wood, 

steel, aluminum, fiberglass and most plastics. 

Sands smooth as glass and can be drilled, 

threaded and painted. 2 oz. 

40-1338 $19.25 

WEST SYSTEM EPOXY 

For shops and/or bigger jobs and 

lamination work. The optional mini 

pumps screw onto the resin and 

hardener to make dispensing and 

5:1 metering easy and automatic. 

Microlight filler (2 oz.) thickens resin 

and makes it into a less-dense putty 

form that is better for making certain 

repairs. 

40-4103 Epoxy Quart with 

Hardener $59.45 

40-4104 Mini Pump Set $13.95 

40-4107 Microlight Filler $15.95 

BOAT CARE PRODUCT RECOMMENDATIONS 

FIBERGLASS BOAT WITH GELCOAT RECONDITIONING 

To protect a non-oxidized surface Use a quality paste wax 

To remove oxidation, chalking, Use 3M Marine “One Step” Fiberglass Restorer 

fading, minor scratches, rust stains, & Wax #40-9005 

plus protect surface 

For a light polish and a go-fast shine Use Hullkote Speed Polish #40-0420 or Sailkote #40-0401 

GENERAL PURPOSE BOAT CLEANING 

Light Duty: General Purpose Boat Cleaning Use a multi-purpose cleaner, following the 

To clean grime, dirt, etc. from hull, deck, manufacturer's recommendations and instructions 

and nonskid surfaces 

Medium Duty: To clean soiled sails and Use Starbrite Sail & Canvas Cleaner #40-9034 

other marine fabrics 

Heavy Duty: For all heavy duty applications, Use a heavy duty multi-purpose cleaner, following the 

incuding those with grease manufacturer's recommendations and instructions 

FOR THE REST OF YOUR BOAT 

To clean, recondition and restore dirty, Use 3M Marine Vinyl Cleaner/Restorer #40-9023 

dried-out or weathered vinyl tramps 

To protect boat covers Use 303 High Tech Fabric Guard #40-6534 

3M 5200 MARINE ADHESIVE 

SEALANT 

The preferred choice for 

sealing masts. Goes on 

smoothly, won't sag, and 

remains workable for 

up to 4 hours. The seal 

is extremely strong and 

retains its strength above 

and below the waterline. 

Provides incredible adhesion, 

yet stays flexible after it's cured. Becomes 

tack-free in 48 hours; completely cures in 5 to 7 

days with no shrinkage. Clean up with kerosene 

or mineral spirits. 3 oz. tube. White. 

40-5203 $12.95 

RONSTAN MULTI-TOOL 

A screwdriver with two 

shackle sockets 

and wrench 

for #8, 

10 and 1/4' nuts as well as metric nuts. 3/4"- 

thick plastic body provides better grip than flat 

stainless tools. 

21-1320 $25.50 

TORQUE DRIVER BY DA KINE 

A comfortable “T” grip handle provides added 

torque to this handy tool which features 

forward, reverse and stationary locked 

ratcheting action. Includes #2 and #3 Phillips, 

#3 Posi-drive, slotted screwdriver, 8 and 10mm 

wrench and 3/32" hex driver. 

32-3020 $10.00 

3M MARINE SILICONE 

A mildew resistant nonsagging, 

moisture-curing 

silicone rubber sealant. 

Remains flexible with 

excellent resistance to 

the marine environment. 

Adheres to bare and 

painted metal, fiberglass, 

glass, non-oily woods, 

many plastics and abraded 

rubber. Clear. 3 oz. 

40-8019 $14.99 

EASY RIGG 

Use less effort to rig with this downhaul tool, 

halyard tensioner and shackle tool. 

The ergonomic shape is 

easy to grip and 

pull and its 

long-wearing 

metal teeth 

grip 3/32" to 3/16" line. Assorted colors prevent 

loss. Display: 25/case. 

01-0010 $9.50 

MAXI RIGG 

Need a little help? Use for hand-holding 

spinnaker sheets or pull anchor lines up to 1/2" 

diameter with minimum strain on hands or grip. 

Hold and control spinnaker sheets. 

Unique safety swivel allows for 

easy and safe release of lines in 

case of sudden or too much 

pull. Hint: use two to pull 

anchor lines hand-over-hand. 

Assorted colors. Line size: 5/16" to 1/2". 

01-0015 $13.95 


3M MARINE VINYL CLEANER/ 

RESTORER 

Cleans, shines, conditions and protects in 

one easy step. Deep cleans dirt and grime 

from vinyl, rubber and plastic surfaces, while 

leaving behind a natural carnauba wax 

protective coating. 15 oz. 

40-9023 $13.99 

SAIL & CANVAS CLEANER 

Starbrite's concentrated biodegradable formula 

safely cleans and brightens all types of white 

and colored sails/fabrics. The cleaner removes 

dirt, stains and mildew from sails, canvas and 

fabric. 16 oz. 

40-9034 $12.95 

PLEXUS ® PLASTIC CLEANER, 

PROTECTANT & POLISH 

The most effective plastic cleaner, 

protectant and polish on the market. 

Leaves a shiny, brilliant and clear 

finish. Antistatic properties repel dust 

and lint. Plexus cleans clear plastic sail 

windows, polishes them to a shine, 

and leaves a micro-thin layer of wax 

for protection. No CFCs. 

40-0503 .42 oz. $1.99 CLOSEOUT 

Boat Covers ......................................... pg 58 

More Shackle Tools .................................26 

Rigging Tape ............................................ 53 

Sail & Boom Bags .....................................59 

Wetsuit & Dry Suit Maintenance .......... 7 

3M ONE-STEP FIBERGLASS 

RESTORER & WAX 

Designed to remove heavy oxidation, chalking, 

fading, minor scratches, rust and exhaust stains, 

plus provide protection on fiberglass/gelcoat 

and marine topside paints. Unique formulation 

combines a rubbing compound with a special 

blend of wax which restores shine and protects 

in one application. 16 fl. oz. 

40-9005 $19.99 

FIBERGLASS STAIN REMOVER 

This stain-absorbing gel removes oil, rust and 

stains, road soil on your boat or other fiberglass 

surfaces. Simply apply, wait a few minutes, 

then wipe off. It is non-abrasive and requires 

no sanding or compounding. Also removes rust 

stains from cloth. 16 oz. 

07-0790 $10.99 

DIGITAL SAIL 

NUMBERS 

Make any number and most 

letters from the digital 

number 8. Greatly simplifies 

dealer stocking and 

ordering! Black. 12" high. 

10-2108BK $2.00 

SAIL NUMBERS 

Numbers are traced on self-adhesive Dacron 

cloth; you cut. Specify numbers (0-9) and 

quantity. Black, self-adhesive, Dacron insignia 

cloth is available in 44" width, per yard. 

10-2810BK 18" Number Traced $6.00 

10-2000BK Dacron Cloth $15.00 

HULLKOTE SPEED POLISH 

Hullkote is an environmentally-friendly, citrus-based, 

hydrophobic polish designed for an easier, faster hullcoating 

application. It creates an ultra-smooth, wellsealed 

finish with an excellent and long-lasting high 

gloss shine. Hullkote provides superior UV protection 

for your hull and spars from the damaging rays of the 

sun. It's also very environmentally friendly and entirely 

safe for you to use. The highly hydrophobic formula 

keeps your hull cleaner much longer than anything else 

available today. It applies in half the time of standard 

petroleum based polishes— just wipe on and wipe off 

with no waiting for anything to dry. 16 fl. oz. 

40-0420 $29.99 

ONE DROP BALL BEARING CONDITIONER 

Use on ALL ball bearings! McLube’s OneDrop Ball Bearing 

Conditioner is designed to be used on traveler cars and 

other ball bearing applications to improve performance 

by reducing rolling friction, allowing ball bearings to roll 

freely and evenly. This is the only product that Harken recommends 

for use on ball bearing travelers. Packaged in a 

unique pinpoint dispenser for clean and easy application. 

40-0410 $10.99 

SAILKOTE BY MCLUBE 

Specifically designed for marine use, Sailkote is the easy-toapply, 

high performance dry lubricant that makes sails, hulls, 

rigging and anything that moves on your boat work more 

efficiently and last longer. Formulated with Dupont Krytox ® , 

an environmentally-friendly, translucent liquid lubricant, it 

dries quickly to a hard, ultra-slick, hydrophobic dry coating. 

Because Sailkote is a dry lubricant, it will not attract dirt or 

contaminants and will not transfer to other surfaces. It is five 

times as effective, and lasts much longer than, wax, oil or 

Teflon ® based lubricants. 16 oz. 

40-0401 $22.95 

303 AEROSPACE PROTECTANT 

Maximum UV protection for vinyl, rubber, fiberglass, plastic, 

and Dacron and monofilm sails. Immediately restores original 

color and gloss to faded hulls and Dacron sails. Fiberglass stays 

showroom new with periodic spray-on/wipe-off applications 

every 45 to 60 days of exposure. Does not contain silicone oils 

or petroleum distillates. Non-aerosol. 

40-0303 8 fl. oz. Pump $7.50 

40-0304 16 fl. oz. Trigger $14.00 

40-0305 Gallon $64.75 

HEAVY DUTY MYLAR 

PEEL & STICK SAIL REPAIR 

This is the “big kit” that you asked for. 

Heavy duty, 3mil-thick mylar comes 

in a big 20" x 27" sheet. Material is 

stored and protected inside a clear 

2-1/8" diameter tube with reusable 

caps. To use, be sure surface to be 

repaired is clean, dry and as smooth 

as possible. Cut strips of at least 2" 

wide by as long as needed. Apply 

one end and then unpeel-and-stick 

as you cover the area to be repaired. 

Repeat on other side. 

10-3501 $18.50 

MAINTENANCE 

DACRON SAIL REPAIR TAPE 

Quickly mend tears in Dacron sails, covers, rain 

gear and seats. The heavy-duty, 3-oz. Dacron 

sailcloth makes 

long-lasting 

emergency repairs 

or provides effective 

reinforcement 

for worn areas. 

Features quick 

marine adhesive 

backing; can be stitched for permament repair. 

White tape is 3" x 15'. 

10-3430 $11.95 

SAIL/KITE REPAIR TAPE 

Cut the needed amount off the 25-foot, 2"-wide 

roll and keep the rest handy for emergencies. 

The 3/4-oz. ripstop nylon is self-adhesive and 

easy to apply. 

$10.95 

10-3400 White 

10-3400-1 Black 

10-3400-2 Light Blue 

10-3400-3 Red 

10-3400-4 Hot Pink 

TENACIOUS CLEAN TAPE 

This tape holds 

tenaciously! 

The superaggressive 

adhesive tape 

sticks to almost 

any surface, yet 

won’t leave an 

ugly residue 

when removed. 

The non-gloss, 

matte finish 

is almost 

invisible, eliminating the need to match colors 

on fabrics. Ideal for patching holes and tears. 

20" x 3". 

10-3410 $5.00 

TEAR-AID KITE REPAIR KITS 

The best known kite 

bladder and canopy repair 

kit we're aware of. Each 

package includes one foot 

of clear repair tape, alcohol 

and instructions. To use, 

clean area to be repaired 

with alcohol, cut patch to 

size, then peel and stick. 

10-3310 Kite Canopy (A)– 2.5" x 12" $5.95 

10-3300 Vinyl Bladder (B)– 1.25" x 12" 

$3.25 

10-3301 Vinyl Bladder (B)– 3" x 12" $5.95 


10-3400-6 Gold 

10-3400-7 Green 

10-3400-8 Dark Blue 

10-3400-9 Silver 

17

LIFE VESTS & SAFETY 

A-B. STOHLQUIST BETSEA AND DRIFTER LIFE VESTS 

BetSea and Drifter vests are designed for sailors who trap-out. They are 

short cut and small so that they are not in the way as you move on the 

boat. “Stretchy” shoulders follow your movement without restriction. Both 

have Stohlquist's unique “cinch” cross chest strap that, once it is applied, 

draws the vest low and with a close fit without tightness. The “cinch” totally eliminates annoying ride-up 

and the rough treatment it can give your chin while you are hooked in, out on the wire. Finally, if you are 

forced to swim, the flotation rides lower on the torso to float you higher. Buoyancy: 16 lbs. 10 oz. 

A. BETSEA FOR WOMEN 

BetSEA is the first truly anatomically correct ladies sailing vest. 

It has built-in cups that self adjust (via the “cinch”) to fit sizes B 

to D. Size Small/Medium fits 28"-34" bust; Large/X-Large fits 

34"-40" bust. 

$119.95 

35-5202-12 Small/Medium Powder Blue 

35-5202-16 Small/Medium Yellow 

35-5202-32 Large/X-Large Powder Blue 

35-5202-36 Large/X-Large Yellow 

B 

A 

B. DRIFTER FOR MEN 

Size Small/Medium fits 33"-39" chest; Large/X-Large fits 

40"-46" chest. 

$119.95 

35-5213-12 Small/Medium Royal: Fits 33"-39" chest 

35-5213-16 Small/Medium Yellow: Fits 33"-39" chest 

35-5213-32 Large/X-Large Royal: Fits 40"-46" chest 

35-5213-36 Large/X-Large Yellow: Fits 40"-46" chest 

C. STOHLQUIST ESCAPE 

The Escape is an all-conditions vest for any boating activity. Its 

super-soft foam gives body-hugging comfort and a low-profile, sleek, 

contouring fit. The lengthened front torso provides fuller coverage and 

conventional fit and the fully adjustable sides and shoulders set proper 

placement on your torso. Adult sizes have 16 lb., 2 oz. buoyancy; 

youth size has 12 lb., 8 oz. buoyancy. Youth fits 50-90 lbs.; X-Small/ 

Small fits 33"-39" chest; Medium/Large fits 40"-46" chest. 

35-5228-02 Youth Royal $49.95 

35-5228-06 Youth Yellow $49.95 

35-5228-12 X-Small/Small Royal $59.95 

35-5228-16 X-Small/Small Yellow $59.95 

35-5228-32 Medium/Large Royal $59.95 

35-5228-36 Medium/Large Yellow $59.95 

COMFORT MAX INFLATABLE PFD 

Revere's USCG-approved Type III PFD provides all 

the comfort and safety you need. Manually inflate 

the vest with the pull of the handle. The fit is 

easily adjustable and a comfortable neck area 

has no Velcro or edge binding to cause chafing 

or abrasion for all-day comfort. The exterior inflation 

system access flap allows for clear, direct access to the CO 2 cylinder 

for rearming. CO 2 cylinder can be replaced without opening and 

unfolding the entire PFD. Includes USCG-compliant whistle and 

SOLAS-grade retro-reflective tape panels on inflatable bladder. 

USCG approved for persons at least 16 years of age weighing 

at least 80 lbs. with a chest size between 30” and 52”. 

$99.00 SPECIAL THROUGH OCT. 2009 

11-3123 Navy 

11-3133 Red 

FASTFIND SATELLITE PERSONAL LOCATOR BEACON 

FASTFIND is the most compact, waterproof and versatile 406 MHz 

emergency location beacon available on the market today. It fits easily 

into backpacks, on life jackets... put it just about anywhere, and get found 

anywhere in the world. No subscription fees are required. 

11-3021 $299.00 

C 

HEAR-ME RESCUE WHISTLE 

Revere’s rescue whistle features 

a powerful, dualtone 

signal. Its 

design meets 

USCG/SOLAS 

specifications. 

11-3010 $2.49 

SEE-ME RESCUE LIGHTS 

Revere’s USCG/SOLAS-approved PFD 

lights are water activated and feature 

microprocessor-controlled LED 

technology. Their light output and 

duration far exceed USCG requirements. 

Made of tough polycarbonate 

plastic with a no-slip design, the 

See-Me Rescue Lights are waterproof, 

weatherproof and shatterproof. 

A lanyard is included as well as an 

attachment clip to secure to all 

brands of life jackets. The 5-1/2" 

lights use 2 AA batteries. 

11-3001 Strobe $26.95 

11-3002 Light $21.95 

LIFE JACKET LIGHT 

This intense incandescent 

life jacket light is visible 

for up to 2 miles in clear 

conditions and has 

an operating life that 

exceeds 8 hours. Simple 

pull-ring operation, even 

with gloved hands or in 

adverse conditions. Waterproof, 

corrosion and temperature resistant 

case. Small and easy to install on most life 

jackets. SOLAS-compliant and USCG-approved. 

11-3005 $26.95 

HYDROSTAR MULTISTROBE 

This versatile, multifunction 

LED design includes a 

flashlight with three brightness 

settings and a strobe. A 

wide suction cup base with 

bungees allows the Multistrobe 

to secure easily to 

any deck configuration, 

while the magnetic 

socket keeps the light 

firmly seated in the base. Use the Multistrobe 

in your tent, on your PFD, on your deck, on the 

trail, or as a distress light on the roof of your car. 

Waterproof to -50ft and batteries are included. 

Height: 6.75” mounted; 4.75” unmounted. 

49-2021 $29.95 

SIGNAL 

MIRROR 

Revere’s 

USCG-approved 

signal 

mrror is specially 

treated and steel plated 

for high reflection capabilities and features a 

recessed hole for sighting. Comes with instruction 

card with soft wiping cloth, all packed in a 

heat-sealed, vapor-proof barrier flexible pouch. 

11-3020 $15.99 

TELESCOPIC PADDLE 

Compact paddle power made tough for years 

of hard use. T-Grip extends from 20" to 45". 

The bright orange blade doubles as a signaling 

device. 

01-1303 $37.99 

FLOATING KNIFE 

Revere's 100% buoyant knife has a neon yellow 

handle and razor-sharp blade with rounded edge 

for safety. 

11-3030 $8.95 

FOLDING ANCHOR KIT 

The convenient 8"x18" zippered pouch holds a 

3.5-lb. folding anchor with chain and 50 feet of 

polypropylene line. Clip the pouch in a convenient 

location or stow the kit in an access port. 

01-6051 $59.00 

FOLDING ANCHOR 

Collapsible anchor is 

constructed of corrosionresistant 

galvanized iron and 

conveniently fits through a 

4" port hole. 3.5 lb. 

24-2311 $18.95 

NAVIGATION LIGHT SET 

Waterproof plastic night 

lights with 

quick-release 

mounting 

brackets meet 

legal requirements. 

Port, 

starboard and stern 

lights attach to hulls, sidebars, boom or crossbar. 

Mount with screws (included). Each light needs 

two “C” cell batteries (not included). 

24-7201 $39.95 

Compasses .............................................pg 4 

Hook Knife .................................................75 

Instruments ................................................. 4 


TELO-CAT BRIDLE VANE 

Designed especially for catamarans, the Telo-Cat 

is durable and highly visible. It installs on the 

headstay bridle in seconds and is easily removed 

for trailering with no tools required. It comes 

complete with 8" vane, adjustable tacking arms 

and mounting hardware to fit most catamarans. 

The Telo-Cat is made of high-impact plastic with 

a stainless steel shaft and tacking arms. Includes 

mounting instructions for H-14/16/18s, Nacra 5.2, 

and Prindles with a turnbuckle forestay adjuster. It 

will also fit other catamarans that utilize a forestay 

fitting similar to these boats. A stainless steel H-18 

adapter is available separately (photo at right). 

08-1450 Telo-Cat Bridle Vane $36.99 

08-1451 H-18 Adapter $13.50 

08-1450A Replacement Vane $8.99 

08-1450D Mounting Bracket $5.00 

08-1450E Replacement Collar, Screw & 

Washer $2.00 

REGATTA 

COURSE STICKER 

Hobie's easy-to-read course chart sticker is 

self-adhesive vinyl. 

45-1002 $2.00 

Piñata Regatta 2006 Photo: Ellie Martin 

WINDEX ® 10.SPORT 

For small boats and dinghies. 

Sapphire suspension bearing, 10" 

vane and adjustable tacking arms 

with tabs. Vane and tabs feature 

reflectors for high visibility day and 

night. Includes glass reinforced 

polycarbonate J-Base for side, top 

or front of mast mounting on most 

dinghies, smaller boats and sport 

boats. Stands just 9.25" tall and 

weighs 1.2 ounces. 

08-3120 Windex 10.Sport 

$40.00 

08-3121 Replacement 

Vane $21.00 

RACING MARK 

Large, 30" x 50" mark is very heavy duty, .030" white vinylpolyethylene 

material with three heavy duty anchor points 

and a large capacity inflation valve. We suggest a counter 

weight of chain (sold separately) to keep mark upright. 

30-1903 Large Racing Mark $99.00 

30-1901P Replacement Plug $1.00 

00-6051-1 Chain 3/16" per foot $2.39 

SIGNAL STICKER 

Race committee code flags on self-adhesive, 

waterproof vinyl. 5-1/2" x 8-1/2". 

45-0101 $3.00 

Attached to boom 

Attached to mast 

WIND INDICATORS 

A-C. HOBIE CAT ® WIND INDICATOR 

The most popular and versatile bridle vane in use today! Features 

snap-lock pin and wide indexing support for positive attachment 

to forestay adjuster. Durable, 7" mylar wind vane freely rotates 

on 12-1/2" long stainless rod. Wind indicator easily detaches with 

stainless pull ring. Fits all boats that use a 7- or 10-hole adjuster at the 

forestay-to-bridle connection. Order #08-1451 adapter if using with a 

Hobie ® roller furling drum. 

A. 04-7703 Complete Vane $17.10 

B. 04-7704 Replacement Vane with Bearings $7.90 

C. 08-1451 H-18 Adapter $13.50 

BLACK MAX 

A versatile, high performance wind direction indicator that attaches quickly to masts and booms on most 

small boats such as Lasers and Sunfish. Unique adjusting system fits masts or booms from 1.5" to 2.5". 

The tough, high-impact plastic vane is designed to withstand years of punishment and the abuse of small 

boat sailing. Features a durable stainless steel mounting arm and set screw and a tough plastic mounting 

base. Wind vane length is 8". Comes in its own unbreakable storage tube. 

08-1295 $28.99 

WIN TAILS 

Ripstop nylon trim indicators attach to the sail 

with 1" adhesive patches. You can see highly 

visible black ones through the sail! 

10-1001 Orange 5 pair $6.95 

10-1004 Orange 50 pair $49.00 

GPS Speedometer/VMG ....................pg 4 

Windmeters ................................................. 4 

Prices & specifications are subject to change www.murrays.com 800-786-7245 CATAMARAN ACCESSORIES 

C 

B 

A 

19

HARKEN ® MAINSHEET SYSTEMS 

HARKEN MAINSHEET BLOCKS 

LOW-PROFILE MAINSHEET BLOCKS 

Developed by Harken ® , these blocks 

optimize the limited space between the 

boom and main traveler. Almost all beach 

cats now use one of these low-profile 

systems. All systems include: 1) Ratchet 

systems that allow the crew to hold high 

line tension loads when line is not cleated; 

2) Removable beckets to allow for attachment 

of spliced lines; 3) Adjustable 

cam arms to suit your sheeting angles; 4) 

Aluminum Cam-Matic ® cleats; 5) Swivel 

shackles at top and bottom to permit 

blocks to turn toward crew and mainsheet 

tension. 

CARBO SYSTEMS 

57mm Carbo Blocks have an enormous 

working range and a very high strengthto-weight 

ratio. The Carbo Ratchamatic ® 

is a load-sensing ratchet block that rolls 

freely in both directions under low loads 

and automatically engages the ratchet as 

loads increase. Changing gears between 

ratchet and light air modes is crisp and 

seamless. Unloaded mainsheets run like 

greased lightning during mark roundings. 

A simple twist of an Allen wrench adjusts 

the ratchet engagement to a higher or 

lower load to suit your strength or sailing 

style. 

CRITERIA FOR SELECTING 

MAINSHEET BLOCKS 

Line size: 2.25" and 57mm blocks use 

up to 3/8" line; 3.00" blocks use up to 

7/16" line. Bigger is better for holding; 

smaller is better for reduced friction. For 

the best of both worlds, consider Robline 

Racing Sheet and/or a tapered sheet. 

Minimum Stacking Height (Blockto-Block 

Measurement): 2.25" Classic 

and 57mm Carbo systems require about 

9.0", while 3.00" Classic blocks require 

11.0” Less length is better when space is 

limited, as on the Hobie ® 16. 

Weight: Less weight is better! The Carbo 

system at 25 oz. is 11% lighter than the 

2.25" Classic System and 60% lighter than 

the 3.00” Classic system. 

Strength (SWL = Safe Working 

Load): Stronger is better! The weakest 

link of the 57mm Carbo System has SWL 

of 1800lbs vs 500lbs for 2.50" and 3.00" 

Classic Systems. 

Ratchet Engagement: Classic blocks 

have Hexaratchet ® with manual on/off 

activation, while Carbo blocks (except 

10:1) have Ratchamatic ® , which has 

an adjustable load-sensing activation 

mechanism. Automatic is almost always 

better, allowing load-released lines to 

play-out faster! 

Cost: 57mm Carbo System is about 30% 

more than the 2.50" Classic system. Is it 

worth 30%? You have to try it! 

28-0194 

28-0004 

5:1 CLASSIC LOW-PROFILE 

MAINSHEET SYSTEM 

5:1 WITH 2.25" BLOCKS 

28-0004 Double with Becket $95.35 

28-0194 2.25" Base Block $217.75 

CLASSIC MAINSHEET BLOCK 

REPLACEMENT PARTS 

28-HSB41 Side Plates (pair) $14.00 

28-HFS1 Screw for Side Plate (each) $.80 

28-0072 3/16" Shackle (2.25" Blocks) $3.55 

28-0138 1/4" Shackle (3.00" Blocks) $5.70 

28-0137 Fairlead Strap $2.40 

19-2918 Screw #10-32x2" $.55 

19-2515 Nut #10-32 (Nylock/Thick) $.40 

BLOCK HANGER 

Use to hang a block from your boom. 

21-0180 $7.10 

6:1 CARBO LOW-PROFILE 


57MM BLOCKS WITH RATCHAMATIC BASE 

These Carbo AirBlocks ® have enormous working 

range, with a higher working load than standard 

blocks, even though they are lighter in weight! 

If you prefer the classic 2.25" low-profile base 

block, order #28-0194 shown at left. 

28-2604 Triple with Swivel $118.00 

28-2629 Carbo Ratchamatic 57mm Base 

Block 6:1 $249.00 







28-2605 57mm Carbo Triple with Swivel & 

Becket $121.80 

28-2620-7 Carbo Ratchamatic 57mm Base 

Block 7:1 $289.00 

20 CATAMARAN ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

28-2629 

28-2604 

40MM CARBO BLOCK 

90° FIXED 

Hang on the becket of any of 

the Harken ® 6:1 base blocks 

to upgrade to a 7:1 system. 

Single/fixed block is 2-1/2" 

long and can accommodate 3/8" 

maximum line diameter. Each. 

28-2659 $29.50 

28-2620-7 

FACTORY STOCK MAINSHEET LENGTHS & ROPE DIAMETERS 

28-2605 

LINE SIZE TIPS 

A larger line size is easier to hold in 

heavy winds. A smaller line size runs 

through blocks more easily and is better for 

light wind sailing. 

Harken recommends a maximum of 3/8" line 

for 2.25" and 57mm blocks and a maximum 

of 7/16" line for 3" blocks. Call or write for 

lacing suggestions. 

Lengths s 

See “Line Size Tips” for recommendations regarding line diameter choices. 

H-17 H-21 Nacra & Prindle 

Ratio Generic H-14 H-16 H-17 Sport H-18 H-20 H-21 Sport Cruiser All Models 

4:1 36' 36' of 3/8" 

5:1 40' 42' of 3/8" 42' of 3/8"* 

6:1 44' 46' of 3/8"* 46' of 3/8" 46' of 3/8" 40' of 7/16" Mainsheet & 

10' of 5/16" Main Traveler Control 

7:1 48' 48' of 3/8" 41' of 3/8" 66' of 7/8" 40' of 7/16" Mainsheet & 

or 7/16" or 7/16" 10' of 5/16" Main Traveler Control 

8:1 52' 68' of 7/16" 

9:1 56' 

* Line diameter depends on block size; see line size tips for recommendations.







28-2631 57mm Carbo Quad with Swivel 

$146.80 


Block 8:1 $297.75 

A 

28-2632 

28-2631 

A-B. HARKEN 2.25" BLOCKS 

Harken double, triple and quad blocks include 

heavy duty shackle for boom connection, and 

head post receptor to fit Hexa-Cat base. 

28-0001 Single $40.80 

A. 28-0002 Single with Becket $51.30 

B. 28-0003* Double $84.60 

28-0004* Double with Becket $95.35 

*Turn into a swiveling block with the addition of 

a #28-HSB63 swivel. 

SWIVEL FOR HARKEN BLOCKS 

Replace shackle on top of any nonswiveling 

Harken block with this 

swivel so the boom block can stay 

aligned with the base block. Often 

requested by Nacra 6.0 sailors. 

28-HSB63 $25.00 

B 

56-9953 

For optimal performance, lube 

locks periodically with McLube 

Marine Dry Lubricant, #40-0401. 

See page 17 for more information. 

MAINSHEET BLOCKS & ACCESSORIES 

56-9955 



57MM BLOCKS WITH RATCHET BASE 

Light weight, low profile and very strong, these 

Carbo AirBlocks ® have enormous working range, 

with a higher working load than standard blocks, 

even though they are lighter in weight. The base 

block has an on-off ratchet and will roll freely 

in both directions when disengaged, such as in 

light air. Engage the ratchet in heavy air when 

you need the mechanical advantage of the 

ratchet. The 57mm ratchet sheave offers 10:1 

holding power, making it easier to handhold in 

heavy air. Safe working load is 1800 pounds; 

breaking strength is 4500 pounds. 

56-9955 57mm Carbo 5-Sheave with Swivel 

$189.00 


Block 10:1 $329.00 

Ball Bearing Conditioner ................ pg 17 

Blocks ...........................................................26 

Cam-Matic Cleats ....................................29 

Oxen Blocks ...............................................24 

Rope .............................................................15 

56-9966 

Hobie Tiger Worlds 2005, Santa Barbara, CA 

C-D. QUICK RELEASE OPTIONS FOR 

BOOM BLOCKS 

01-3233 3/16" Quick Release Shackle 

for 2.25" Blocks $29.00 

C. 01-3232 1/4" Quick Release Shackle 

for 3" Blocks $31.00 

D. 22-4501 1/4" Snap Shackle with Tack 

Shackle $39.00 


56-9964 



57MM BLOCKS WITH RATCHET BASE 

Get maximum purchase power with Harken's 57 

mm triple fiddles with reinforced cam arms. 

56-9966 57mm Carbo 6-Sheave with Swivel 

$192.00 


Block 12:1 $391.40 

C 

C-D. QUICK RELEASE OPTIONS FOR 

HARKEN BASE BLOCKS 

C. 01-3232 1/4" Quick Release Shackle for 

H-18, Nacra, Prindle $31.00 

D. 22-4501 1/4" Snap Shackle with Tack 

Shackle for H-18, Nacra, 

Prindle (tack shackle does 

swivel) $39.00 

18-3M075L Quick Release Pin with Lanyard 

for H-14/16/17 $26.00 

F 

Shown assembled 

E-F. HARKEN SWIVEL 

WITH TURNING BLOCK 

A mainsheet swivel block for Laser (does not 

fit Laser 2), Sunfish, Capri and other dinghies. 

Hexaratchet handles up to 3/8" line. 

E. 28-0019 Single Little Hexaratchet– 

3/8" line $67.30 

F. 28-0205 Little Swivel Base with 

Cam-Matic (no ratchet)– 

1/8"-1/2" line $112.55 

E 

D 

21

MAIN TRAVELERS H-16 JIB TRAVELER CONTROLS 

TRACKER REPLACEMENT PARTS —1993 & EARLIER H-14/16/17 

The standard replacement parts for all 1993 and earlier H-14/16/17s. Includes 2-3 rivets where required. 

07-1050 Tracker Car Assembly Complete $79.95 

07-1051 Deck Plate $8.40 

07-1059 Sheave Kit (1 each: sheave, 

spacer, screw, nylock nut) $8.00 

07-1054 Hinge Upright $17.40 

07-1055 Hinge Pin $3.00 

07-1060 Bottom Roller $49.50 

19-5024 Countersunk Rivet CCC 6-6– each $.74 

H-14/16/17 TRACKER 

TRAVELER KIT 

Includes #07-1050 tracker car, swivel cam, 

mounting plate, line and fasteners. Standard on 

pre-1994 H-14/16/17. 

07-1040 $150.00 

The last digits of the number inscribed on 

the transoms of a Hobie ® indicate the month 

and year of manufacture. 

TRAVELER CAR — 1994 & LATER H-14/16/17 

The tracker car on 1994 and later H-14/16/17s offers superior strength 

and free movement. It has higher load axles with thick 

brass wheels for ease of traveler movement. A new, deeper 

traveler track that is riveted on is required to retrofit boats 

made in 1993 or earlier. Includes 2-3 rivets where required. 

07-0111 Heavy Duty Tracker Car Assembly Complete H-14/16/17 $82.95 

07-0112 Roller Unit Only $58.80 

50-50252021 Main Traveler Track with Deep Profile H-17; you cut to fit H-14/16 $116.00 

19-5021 Rivet for Traveler Track Installation CCC 6-4– each $.74 

To properly maintain hardware, rinse 

frequently with fresh water and lubricate 

moving surfaces with One Drop Ball Bearing 

Conditioner (#40-0410) or Sailkote (#40-0401). 

A 

A. HARKEN TRAVELER CAR 

Harken ball bearing traveler with fixed sheaves and 

eye strap will fit most late model Nacra catamarans. 

#28-0214 and #28-0441 have SWL of 1250 lbs. 

Replacement bearings come in packages of 21, 

#28-0214 and #28-0441 require 64 balls. A car 

loader is needed to load bearings on pre-2003 cars! 

A. 28-0214 Extra Hi-Load Traveler Car Pre-2003 

$190.00 

28-0441 Traveler Car with Swivel Cam 

H-17S/20/21 (non-captive ball 

bearings; pre-2003) $288.00 

28-0177 Replacement Bearings (21) $10.50 

28-HSB8 Car Loader $10.00 

28-0173 End Stop– Pair $6.60 

28-HSB78 Trav. Car End Plates (pair) $16.00 

28-2720 Repl. Main Traveler Track 99” 

(H-17/20, Nacras & Others) 

Post-2002 $119.95 

28-2736 New (post-2002) Traveler Car with 

Captive Bearings $182.80 

(New car works with new track only) 

19-1622 Screw Stainless #8 x 1-1/2” $.32 

PRINDLE ® TRAVELER 

Standard equipment on new Prindle ® cats. Four durable plastic 

rollers ride smoothly on Prindle ® traveler tracks. Two cylindrical 

sheaves reduce traveler control line friction. 

56-3010 $80.00 

JIB TRAVELER CONTROL KITS FOR H-16 

A jib traveler system allows remote adjustment of the jib cars. This dramatically increases 

downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an 

adjustment by hand. Each of the following kits is complete with cleats, turning blocks, line, shock 

cord, fasteners and instructions. Photos show recommended cleat locations, but cleats can be 

positioned to meet your individual needs. 

H-16 JIB SHEET & TRAVELER CONTROL UPGRADE 

Designed as an upgrade for H-16 with swivel cam cleats jib sheet system. Replace old Hobie ® traveler cars 

with new Ronstan ® traveler cars and the existing cam cleats become part of the jib traveler control system. 

A detailed photo of Ronstan Jib Traveler Car #01-3130 is on page 23. Kit also includes Harken cheek 

blocks, jib traveler control lines, shock cord to self-return jib cars to center, fasteners and instructions. 

01-3120 Complete Kit (less swivel 360 cleats & bases) $195.00 

25-3010 Swivel 360 Cleat– each (if needed) $57.00 

07-1162 Base with Fasteners for Swivel 360 cleat– each $9.25 

H-16 FIXED-CAM TRAVELER CONTROL 

Low profile, lightweight and rugged with plenty of range. May be the best value remote positioning traveler 

control kit! Molded urethane mounting bases fit crossbar and accommodate Ronstan C-cleats with 

Fast Track fairleads which are very sturdy and provide a wide range of cleating angles. Includes Ronstan 

C-cleats with fairlead, mounting base, trim line, shock cord return, fasteners and instructions. Tren Tec jib 

traveler cars shown in photo are not included (see page 23). 

01-3112 $130.00 


22 CATAMARAN ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change

HARKEN ® LITTLE HEXARATCHET 

A smaller Harken on/off Hexaratchet with 2.25" 

sheave, Delrin ® ball bearings, becket and aluminum 

Cam-Matic cleat. The Hexaratchet is ideal 

for hand-held jib sheeting and long jib sheet life. 

Standard equipment jib block on Nacras, Prindles 

and later Hobie ® 18s. 7/16" line capacity. Each. 

28-0188 $153.85 

21-0371 21-0398 

LOOP SLIDES AND STOPS 

Traveler car with spring-loaded stop pin and 

eyestrap. 21-0371 for 5/8" track fits Hobie ® . 

21-0398 is for 7/8" track and fits P-18.2, P-19 

and post-March 1989 Nacra 5.0, 5.5SL, 5.7, 5.8 

and 6.0. 

21-0371 For 5/8" Track $26.25 

21-0398 For 7/8" Track $30.00 

A B C 

A-C. SPRINGS & SHACKLES 

Harken is a universal spring. Soft conical spring is 

used for bullet blocks; medium is for jib blocks. 

A. 28-0071 Harken Stand-Up 

Spring $1.50 

B. 21-0319 Stand-Up Spring (Conical –Soft) 

for Harken Bullet Block (eg. 

H-16 Jib Traveler Car, Hobie ® 

Spinnaker Pole Blocks) $2.00 

C. 21-0320 Stand-Up Spring (Conical 

– Medium) for Oxen Blocks, OK 

Car, etc. $2.00 

28-0072 Harken 3/16" 

Stamped Shackle 

$3.55 

D-E. H-16/18 JIB TRACK 

Stainless jib tracks are 5/8". An end stop can be 

fastened with a #19-1620 screw or #19-5021 

countersunk rivet. Use six #19-5021 rivets to 

fasten 18" track. 

D. 21-0366 Track End Stop $3.25 

E. 21-0363 Jib Track 5/8" x 18" $18.00 

19-1620 #8 x 1 Flathead Self-Tapping 

Machine Screw $.34 

19-5021 CCC 6-4 Rivet $.74 

19-5031 CCP 6-4 Rivet $.70 

21-0364 Jib Track Section 5/8" x 5' 

$60.00 

JIB SHEETING COMPONENTS 

D E F H 

I 

G 

F. JIB TRAVELER CARS FOR H-16 

Black plastic cars have four holes and slide freely 

in the track. Low profile shape saves needed 

space when mast is raked to the extreme. #12- 

3021 is the only car that fits Hobie's integrated 

jib track which is extruded into the crossbar, as 

opposed to the external track which is riveted to 

the crossbar (standard 

on pre-1997 H-16). 

Pair. By Tren Tec. 

12-3020 For 1996 and Earlier H-16 with 

External Track $18.00 

12-3021 For 1997 or Later H-16 with 

Integrated Jib Track $18.00 

J 

J. JIB HALYARD ROPE WITH 

SISTER CLIPS 

Little Sister Clips are a quick on/off 

halyard extension system. They 

speed the untie and retie process 

so that a minimum amount of 

sail snapping occurs while you 

cleat up. 

04-7732 H-18/20 

$16.50 

J. 04-7734 Prindle $21.00 

G. KISME OK FOR H-16 

05-0410 OK with Harken block– Pair $49.00 

05-0400 OK car only– Each $8.00 

H. JIB TRAVELER CAR 

25-0267 Jib Traveler Car with 

Block for H-16– Each $49.00 

I. LOW PROFILE SWIVEL 

WITH ROLLER FAIRLEAD 

This is a must have item when rebuilding your 

older boat. Swiveling dead eye with cam cleat 

and stop. Anodized aluminum cam cleat and 

black acetal dead eye and fairlead. Includes car 

with stop and is complete with roller fairlead. 

Pair. 

01-3130 $140.00 

Check the integrity of the rivets or screws 

that hold down the track (especially Hobie ® 

16 jib track). Replace loose fasteners before 

they pull out and ruin your day! When replacing 

rivets, check for oversize holes. In some cases, a 

rivet casing can be used to shim a standard size 

rivet to an oversize hole. 

JIB TRAVELER CARS FOR H-16 

WITH INTEGRATED TRACK 

Hobie’s jib traveler car for the integrated track 

crossbar on the Hobie 16 adds bearings to the 

popular version from the 2004 Worlds. Standard 

equipment since late 2005, this jib traveler is 

constructed of Zytel, a very strong, glass-reinforced 

nylon that resists fatigue and impact 

failure. Brass traveler bearings give easier movement 

under load. Includes holes for anchoring 

traveler and traveler return lines. Each. 

50-25232201 For Integrated Jib Track Port 

$110.00 

50-25232211 For Integrated Jib Track 

Starboard $110.00 

Blocks .................................................... pg 25 

Gloves ..........................................................13 

Oxen Blocks ...............................................24 

Rope ............................................................ 15 

JIB HALYARDS & KITS 

H-16 AUSSIE JIB HALYARD 

Reduce mast compression by 66%! 

It allows easier tacking, better mast 

rotation and consistent mast bend! Use 

with existing lower forestay assembly. 

The “fail-safe” pigtail keeps block 

failure from resulting in de-masting. A 

similar system is stock on new H-16s. 

Complete kit includes everything 

you need: hardware with all Harken 

blocks, 70' of prestretched line, zippered 

pouch and instructions. Racing 

class legal. 

01-3302 Kit $120.00 

02-3300-00 Pigtail Only $23.00 


23

RATCHET BLOCKS 

OXEN SELF-HOLDING BLOCKS 

Oxen self-holding blocks offer 

release! Cleat or uncleat your 

wings, even if your sheet passes o 

is rarely cheap! 

For a complete set of Oxen blocks with cars, order two each of the following: blocks, appropriate cars to fit your boat's track, stand-up springs and shackles. 

OXEN SELF-HOLDING JIB/ 

SPINNAKER 

BLOCK 

The ultimate high 

tech, self-holding 

jib block. Optional 

Becket Kit converts 

#05-0761 to 

#05-0762. 

05-0761 3" Block with 

Pin $219.00 

05-0766 Becket Kit $65.00 

OXEN SELF-HOLDING JIB 

BLOCK WITH BECKET 

For serious crews of cats 

without jib traveler 

cars, including P-16, 

N-5.5, and H-20. 

3" sheave with 

pin and becket. 

No exterior cleats. 

Each. 

05-0762 3" Block 

with Pin & Becket $249.00 

REBUILDING OXEN BLOCKS 

Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send 

us your block and we will rebuild it for an average cost of $50.00 plus parts and shipping. 

Some individuals have had success repairing their own blocks, but we have had many 

blocks sent to us in pieces when others have failed. We regret that our technician is not 

available to answer rebuilding questions. This information is provided so that you can 

make an informed decision about the repair of your blocks. 

Unfortunately, not all Oxen blocks were created equal. There have been three generations 

of the Inner Hub Assembly and other differences in model construction. Also, a trained 

technician is needed to properly adjust the spring tension which is critical and unique to 

each block. In addition, the wear surfaces must be within 10/1000" or there will be too 

much wobble and the block won’t work or will soon fail. 

Older Versions of the Oxen Block: 

• Do not contain the “V” Ring Seals (#3) which keep water out of the unit. These blocks 

depend on a large amount of grease to keep water out. Needless to say, water gets in 

and corrosion takes place, especially on the springs which are not stainless steel. 

• Cannot be retrofitted with “V” Ring Seals because the Face Plate and Main Body Sheave 

will not accommodate seals. 

• Are lacking the Spring for the Trip Lever Paw. There is no spring and there is not even a 

place to put a spring. However, Murrays has constructed a special jig to update the core 

to accommodate the spring and we’ll be happy to retrofit your Oxen block. 

• Have different springs, depending on which model you have. Unfortunately, it is impossible 

to determine over the phone which spring you need. Just send it to us and we’ll 

take care of it! 

• Can be upgraded to be comparable to a new Oxen block, but it is necessary to replace 

some or all of these parts, depending on the vintage of your block: 

1 Trip Lever Return Spring (#20) 

1 Face Plate (#8) to accommodate the “V” Ring Seal 

1 Main Body Sheave (#4) to accommodate the “V” Ring Seal 

2 Hub “V” Ring Seals (#3) 

Other springs and “O” Rings as needed 

# on 

OXEN REPLACEMENT PARTS 

Diagram Item # Description Price 

1 05-0761-01 Hub Center Screw (2 pieces) $22.50 

2 05-0761-02 Center Screw “O” Ring Seal $.75 

3 05-0761-03 Hub “V” Ring Seal $7.00 

4 05-0761-04 Sheave Main Body $45.00 

5 05-0761-05 Face Plate “O” Ring $3.00 

6 05-0761-06 Outer Hub Assembly $25.00 

7 05-0761-07 Inner Hub Assembly $75.00 

8 05-0761-08 Face Plate $18.00 

9 05-0761-09 Cheeks $45.00 

10 05-0761-10 Swiveling Mounting Post Short $7.00 

11 05-0761-11 “C” Clip Ring $1.00 

13 05-0761-13 Teflon Washer $.75 

14 05-0761-14 Becket Mounting Strap $45.00 

16 22-9492 Split Ring 3/16-1/4 $.40 

17 05-0761-17 Becket Roller $10.00 

18 05-0761-18 Becket Clevis Pin $5.00 

19 05-0761-19 Becket Strap Seal $.50 

20 05-0761-20 Spring: Trip-Lever Return $2.00 

21 05-0761-21 Spring: Plastic Cam $2.00 

22 05-0761-22 Spring: Main Paw $2.00 

23 05-0761-23 Spring: Outer Hub Ring $2.00 

24 05-0761-24 Cam Inner Hub $12.00 

25 05-0761-25 Trip-Lever Paw (plastic) $11.00 

26 05-0761-26 Spring: Standup Trip Lever $2.00 

27 05-0761-27 Main Paw $14.00 

– 05-0761-00 Sheave Self-Locking $199.00 

– 

(Complete Inner Assembly less V Ring 

Seals and Hub Center Screws) 

Labor (includes disassembly, cleaning, 

lubricating and reassembly) $50.00 

Replacement parts and rebuilding service 

are available for all Oxen products. 

A-B. HEXARATCHET ® BLOCKS 

For hand-held spinnaker or small dinghy sheets. 

Hexaratchet ® offers increased holding power 

without fraying the line. 

A. 28-0009 3" Single Hexaratchet ® 

#750 SWL 7/16" line $79.70 

B. 28-0019 2.25" Single Little Hexaratchet ® 

#500 SWL 3/8" line $67.30 


A 

B 

C. SMART-RATCHET BY RONSTAN 

With up to 14:1 holding power, Ronstan's Smart- 

Ratchet automatically engages depending on the 

line load, giving you precise control in changing 

conditions. It is load adjustable by simply 

rotating the head post. Ideal for spinnaker, jib 

and mainsheet applications on off-the-beach 

boats. Maximum line size 5/16"; SWL 550 lbs. 

21-4210 $77.75 

57MM SINGLE CARBO RATCHAMATIC 

Under low loads, this lightweight, highstrength 

2-1/4" ratchet block rolls 

freely in both directions like 

a non-ratcheting block, but 

automatically engages the 

ratchet mechanism as loads 

increase, giving sailors an 

additional holding power of 10:1. 

28-2625 500 SWL 3/8" line $86.15 

C

J 

A B C D 

K 

G-I. CHEEK BLOCKS 

Downhaul and turning blocks. 

G. 28-0416 Cheek 16mm $13.90 

H. 21-0661 Ronstan Midget (H18, Prindle) 

$9.60 

I. 28-0233 Harken Micro Cheek $13.65 

M 

A-F. HARKEN AIR BLOCK 

Offers a very high load in an extremely lightweight 

block. The block itself is only 1-1/8" long. 

5/8" sheave will accept line as large as 7/32". 

250 lb. SWL. 

A. 28-0404 Single $12.00 

B. 28-0405 Single with Becket $13.75 

C. 28-0406 Double $25.00 

D. 28-0407 Double with Becket $27.30 

E. 28-0415 Sheave Only $8.40 

F. 28-0417 Single with Swivel $21.60 

RONSTAN ORBIT BULLET BLOCKS 

Ronstan ball bearing Orbit Blocks boast the 

highest strength-to-weight ratio available, 

achieved through all-composite reinforced polymer 

materials and multiple attachment options. 

20mm 

Use the 20mm BB for control lines 

on catamarans and dinghies to 16 

feet (5m), especially downhaul, 

outhaul and spinnaker halyards. 

Features: integrated stainless steel 

hub to accept lashing attachment and 

through-sheave becket; suits up to 4mm (5/32”) 

lashing; high compression strength carbon 

Acetal sheave; stainless steel ball bearings; 

and nylon frame/cheeks. Specifications: 3/4” 

(20mm) sheave diameter; 1-1/4” long x 3/4” 

wide x 9/16” deep; 1/4” (6mm) maximum rope 

size; 550* lb. maximum working load; 1210 

lb. breaking load; weighs only .3 oz. (*Block 

must be lashed through hub. MWL and BL are 

dependent on the strength of lashing. Knots, 

splices, stitching will generally have a lower BL 

than the line itself.) 

21-25109 20mm $11.95 

30mm 

Use 30mm for jib clew block. Specifications: 

1-3/16” (30mm) sheave diameter; 

1-7/8” long x 1-3/16” wide x 3/4” 

deep; 5/16” (8mm) maximum 

rope size; 661 lb. maximum 

working load; 1323 lb. breaking 

load; weighs .8 oz. 

21-35101 30mm $12.95 

Ball Bearing Conditioner ................ pg 17 

Harken Mainsheet Systems ...........20-21 

Replacement Cleats ................................29 

Rope ............................................................ 15 

L 

E 

J-N. HARKEN MICROS 

Ball bearing blocks with stainless side plates. 

1/4" line. SWL: Singles 200 lbs., Doubles 350 lb., 

Triples 500 lbs. 

J. 28-0224 Single $10.10 

K. 28-0225 Single with Becket $11.60 

L. 28-0226 Double $25.30 

M. 28-0227 Double with Becket $27.30 

N. 28-0228 Triple $36.15 

28-0231 Triple with Becket & Cleat $80.70 

O. RONSTAN SINGLE MICRO 

Single block has loop head and SWL of 550 lbs. 

Stainless steel ball bearings. 1/4" (6mm) line 

max. 

21-2011 $11.75 

T 

CC 

F 

N 

G 

U 

Z 

AA 

T-U. SMALL BULLET BLOCKS 

1-3/16" sheave diameter. Delrin bearing. 3/8" 

line capacity. 

T. 23-0911 Small Bullet Block $7.00 

U. 23-0912 Small Bullet Block with 

Removable Sheave $8.50 

V-EE. HARKEN BULLETS 

1-1/8" sheave diameter. Delrin ball bearings. 

5/16" line capacity. Maximum safe working load 

(SWL): Singles 300 lbs., Doubles 400 lbs., 

Triple and Quad 600 lbs. 

V. 28-0082 Single $12.75 

W. 28-0098 Single (Wire) $16.65 

X. 28-0092 Cheek $15.50 

H 

O 

P. SINGLE MICRO BLOCK 

Used on some Hobie jib halyards. 

27-0153 $9.50 

V 

I 

P 

Y. 28-0083 Single with Becket $15.15 

Z. 28-0084 Double $34.50 

AA. 28-0085 Double with Becket $37.00 

BB. 28-0086 Triple $48.10 

CC. 28-0166 Single with Swivel $22.40 

DD. 28-0167 Single with Swivel & Becket 

$24.95 

EE-FF. HARKEN BIG BULLET 

1-1/2" sheave diameter. 3/8" line (7/16" in a 

squeeze) 300 lb. SWL. 

EE. 28-0125 Single $23.00 

FF. 28-0126 Single with Becket $25.75 

28-0169 Single with Swivel & Becket 

$33.70 

MM 

KK-MM. SMALL FIDDLE BLOCKS 

Use: Boom vangs, righting aids. 1/4" line 

capacity. For 3:1 or 4:1 systems, as noted. 

#21-0186 and #21-0188 are by Ronstan; SWL 

660 lbs. #28-0245 is by Harken; SWL 350 lbs. 

KK. 21-0188 Single with Becket (3:1) $16.00 

LL. 21-0186 Small Double Fiddle Block 

(4:1) $27.60 

MM. 28-0245 Fiddle with V-Jam & Becket 

(4:1) $32.20 


W 

BB 

DD EE FF 

Q 

Q-S. 29MM HARKEN CARBO BLOCKS 

Q. 28-0348 29mm Carbo Single Fixed 

$12.00 

R. 28-0351 29mm Carbo Ti-Lite– Repl for 

Harken 82 & 125 $19.15 

S. 28-0371 29mm Carbo Jib Clew Block 

Asssembly $25.60 

40MM HARKEN CARBO BLOCK 

Hang on the becket of any of the 

Harken ® 6:1 base blocks to upgrade 

to a 7:1 system. Single/fixed 

block is 2-1/2" long and can 

accommodate 3/8" maximum 

line diameter. Each. 

28-2650 $21.60 

X 

R 

Y 

S 

KK 

NN 

GG 

HH 

BLOCKS 

GG. LOOP TOP SINGLE BLOCK 

Used on older Prindle trapeze return shock cord. 

For up to 1/4" line. SWL: 660 lbs. Wt. .5 oz. 

21-0571 $9.25 

HH. RONSTAN SINGLE BLOCK 

Replacement jib clew block for Hobies. Lightweight 

stainless block with ferrule has 

1-1/8" x 5/8" sheave diameter, Delrin bearing 

and 1/2" line capacity. SWL: 950 lbs. 

21-0469 $16.00 

II. H-16 DOWNHAUL CHEEK BLOCK 

The plastic sheave degrades and breaks on older 

H-16 downhaul cheek blocks and the entire 

block must be replaced. To install, use four #19- 

5031 rivets and four #19-5020 sealing casings. 

25-3340 $16.00 

JJ. WIRE JIB HALYARD BLOCK 

For H-16/18. Sheave diameter is 1-1/2". 

50-20240001 $53.50 

LL 

OO 

NN-OO. MEDIUM FIDDLE BLOCKS 

The price is right! Use: Boom vangs, righting aids. 

3/16" to 3/8" line. 

NN. 25-3901 Fiddle with Swivel 4:1 $26.00 

OO. 25-3902 Fiddle with Cleat & Becket 4:1 

$65.00 

II 

KJJ 

25

DOWNHAULS 

N 

A 

O 

M 

M-P. FACTORY GOOSENECK PARTS 

FOR H-14/16/18 

Replacement parts from the Hobie ® factory. 

M. 50-10770001 Gooseneck Assembly 

Complete $58.95 

N. 50-10772001 Slide $17.50 

O. 50-50772031 Vertex $9.00 

P. 50-10772010 Boom Pin with Roll 

Pin $16.95 

P 

B C 

D E F G H 

I 

J 

K L 

A-M. CATAMARAN DOWNHAUL COMPONENTS 

For the racer… ultimate control of sail shape and power. Convenient “up-release” exit pivot blocks can 

be mounted on either side of the mast. Dual control lines allow downhaul adjustment from all normal 

sailing positions, even from the wings! Allow time for installation and correct alignment of parts. Also 

allow an extra few minutes for rigging and de-rigging. Recommended for A-fleet and soon-to-be's! Pick 

and choose components as needed. Check your Class rules regarding system limitations for racing. 

A. 28-0291 Harken Exit Pivot with Micro Cam-Matic $70.25 

B. 28-0140 Harken Exit Pivot with Cam-Matic $95.00 

C. 28-0359 Cat Quick Rig 4:1 Downhaul Block $161.75 

D. 28-0224 Harken Micro Single Block $10.10 

E. 28-0225 Harken Micro Single Block w/Becket $11.60 

F. 28-0226 Harken Micro Double Block $25.30 

G. 28-0228 Harken Micro Triple Block $36.15 

H. 28-0233 Harken Micro Cheek Block $13.65 

I. 27-0236 CamCleat with Top Roller $18.95 

J. 03-0190 Channel Insert 10-32 $2.00 

K. 19-3500 RMHS #10-32 x 7/8 $.40 

L. 27-0199 Rope End Stop $2.10 

19-5020 Rivet Casing $.70 

SUPER GOOSE FOR 

H-14/16/17/18/20/21 

Guaranteed for the life of your boat! This 

upgraded gooseneck is constructed 

from a solid block of 6061-T6 

aluminum and then finished 

with a coat of black hardkote 

anodizing. By Tren Tec. 

Not compatible with older H-17 model. 

12-4060 $21.00 

DOWNHAUL 

SCALE 

Handy self-stick scale 

takes the guesswork 

out of setting the 

downhaul. 10" in 1/2" 

increments. Can also 

be used as an outhaul 

scale. 

07-2082 $2.50 

H-14/16 GOOSENECK BEARING KIT 

This simple kit is the easiest and least 

expensive way to get more 

from your downhaul 

system. Downhaul 

adjustment becomes 

smooth and easy. Kit 

contains two gooseneck 

bearings with connecting 

screws. By Tren Tec. 

12-2050 $7.75 


DOWNHAULS 

The downhaul is the most important tuning tool on the boat. According to Rick White; “Because 

downhaul is such an important factor in flattening your sail or making it full, it is extremely 

important to be able to make this adjustment during races… Use as much as is allowed and make 

it as easy as possible to adjust.” 

8:1 DOWNHAUL KIT WITH 

DOUBLE BLOCKS 

All ball bearing Harken blocks and cleats make 

this system powerful and smooth. The base unit 

rivets to the mast and the two double blocks on 

the top are tied together through the downhaul 

ring of the sail. The base unit includes two pivot 

blocks with cam cleats that allow adjustment 

from anywhere on the trampoline or trapeze. 

Hobie ® Class legal for racing. 

07-2088 $239.00 

ALL-PURPOSE TOOL 

Stainless tool is a wrench that fits nuts 

for 1/4" and 5/16" bolts. It's also a 

cam remover, screwdriver, bottle 

opener and shackle tool. Helps with 

shackle pins and drain plugs. 

01-0005 $6.95 

CAT SHACKLE TOOL 

A screwdriver, bottle opener, shackle tool and 

open-end wrench for nuts that fit 1/4", 5/16" 

and 3/8" bolts. Aids in getting pins out of 

shackles and loosening drain plugs. Stainless tool 

comes with lanyard. 

01-0006 $7.25 

H-14/16 6:1 DOWNHAUL 

Class legal, complete 6:1 

kit comes with either 

Harken Carbo or lighter, 

less expensive micro triple 

block and triple with cleat. 

Includes class-approved 

attachment for base of 

mast, all hardware and line. 

Use with gooseneck bearing 

kit #12-2050. 

07-2089 With Carbo 

Blocks 

$139.00 

07-2089-1 Euro: With 

Micro Blocks $125.00 

H-18 5:1 POWER 

DOWNHAUL 

Powerful downhaul 

adjustment from any 

sailing position. Class 

legal 5:1 downhaul 

kit for H-18 includes a 

space-saving bracket 

with becket, two 

Harken bullet cheek 

blocks, Harken pivoting 

exit block with micro 

cleat, Harken double 

bullet block, trim line, 

fasteners and instructions. 

Easy to install! No 

holes to drill. 

07-2087 $159.00 

H-14/16 3:1 

DOWNHAUL 

This class legal 3:1 

downhaul kit for H-14/16 

includes Harken ® bullet 

block with becket and 

swivel, and 6 feet of 3/16" 

low-stretch, 8-strand line. 

01-1028 $27.25 

Blocks .................................................... pg 24 

Gloves ..........................................................13 

Rope .............................................................15 

Spinlock® Blocks ......................................29 


MAST ROTATION SPARE & REPLACEMENT PARTS 

Mast Step 

Mast Base 

Mast Step Hinge 

A. MAST BASE 

ASSEMBLY 

PARTS FOR 

HOBIES 

The mast step hinge aids 

in raising and lowering the 

A 

mast and is standard equipment on most Hobies 

and an upgrade on older boats. Complete hinge 

assembly includes special pins with retainers 

to prevent loss. Heavy duty hinge (as shown) 

requires complete removal before sailing. 

A. 01-3021 H-16 Complete Hinge 

Assembly $26.00 

25-3360 Hinge Only—No Pins $14.00 

50-21380001 H-14/16 Mast Step Link Kit by 

Hobie® $21.95 

18-4D125 Ball Lok Pin Detent 1/4" x 1-1/4" 

$8.00 

22-9811 Clevis Pin Headless 3/16" x 

1-1/2" H-16 $3.50 

50-20640011 Mast Base Black H-16 $54.50 

50-20200011 Mast Step Black H-16 & H-14 

Drilled for Dolphin Striker Post 

$93.95 

50-60650011 Mast Base Hinge Black H18 

$42.00 

50-38171001 H-20/Wave Mast Step $36.50 

To avoid breaking the mast hinge on 

a Hobie ® 18, check proper alignment of 

holes to allow correct seating of hinge to 

mast base. It's a good idea to keep a spare 

mast hinge on hand just in case! 

B-D. PRINDLE 

B 

MAST STEP 

REPLACEMENT 

D 

PARTS 

B. 56-F128 Mast Step 

C 

Pin $7.00 

C. 56-2007 Prindle Half Ball $22.00 

56-2006 Prindle-15/16/18 Mast Step 

Casting $56.00 

56-6005 Prindle-16 Mast Base Casting 

$30.00 

56-6805 Prindle-18 Mast Base Casting 

$46.00 

D. 56-6815 Prindle Mast Hinge $18.00 

56-6905 Prindle-18.2/19 Mast Base 

Casting $35.00 

Clevis Pins ........................................... pg 31 

Gloves ..........................................................13 

Rigging ..................................................50-52 

Rope .............................................................15 

Rudder Pins ...............................................32 

Zip Pouches ...............................................58 

E 

H 

F G 

MAST STEP BEARINGS 

E-F. FOR H-14/16 

The contoured Delrin ® bearing outlasts Teflon ® 

bearing. Teflon bearing forms to mast base with 

first use. Standard bearings are .06" thick. 

E. 07-1130 Delrin Bearing $5.30 

F. 01-2041 Teflon Standard 3/Pkg $5.00 

01-2042 Teflon Standard 100/Pkg 

$125.00 

G. FOR H-18 

H-18 Bearing Kit includes a new bearing, stainless 

steel washer, and Teflon washer. 

G. 01-4045 H-18 Bearing Kit $8.75 

19-3020 1/4-20x7/8" Stainless Pan Head 

Machine Screw (for pre-1990 

boats) $.70 

19-3019 1/4-20x1/2" Stainless Pan Head 

Machine Screw (for post-1990 

boats) $.60 

22-9815 Clevis Pin Headless 1/4" x 3-3/8" 

(for mast base hinge) $4.00 

50-60110000 Bearing Only $6.50 

H-I. FOR OTHER HOBIES 

H. 50-50212301 H-17/Wave Mast Ball (can be 

glued for Trac 16) $24.00 

I. 50-30110001 H20/21/Getaway Mast Ball 

$26.95 

50-F21062673 Tiger Mast Ball $26.00 

FOR OTHER CATS 

56-2007 Prindle Half Ball $22.00 

56-2504 Nacra 1-1/2" post-'83 $17.50 

56-F158 Mast Step Pin for H-17/20 & 

Nacra $7.00 

I 

NACRA ® /INTER MAST STEP SYSTEM 

The components listed below comprise Nacra's mast stepping 

system and can be used to retrofit a pre-’83 model Nacra. The mast 

base engages the 1-1/2" diameter mast ball and is secured by a 1/4" 

x 2" headless clevis pin to allow the mast to be safely raised or lowered. 

The stainless mast support rod is 9/16"-18 x 14-3/4" and requires 

two nuts and washers. Complete kit includes split rings and rivets. 

01-8002 Complete Kit 

Individual Parts 

$160.25 

56-6605 Mast Base Casting $48.00 

56-6605CAR Mast Base Carbon (for Carbon Mast) 

for Inter 17/18 (upgrade) or Inter20 $112.50 

56-F158 Mast Step Pin $7.00 

56-0428 Rod with nuts & washers $60.50 

56-2507 Mast Support Rod only $58.00 

56-2505 Mast Support Pad $17.50 

56-2506 

Mast Balls 

Compression Sleeve $7.00 

56-2504 1-1/2" post-'83 $17.50 

Older 1-1/4" mast balls are no longer available. If a 

new ball is needed, you must upgrade the entire system to 

accommodate the new 1-1/2" balls. 

J. SPARES & REPAIR KITS 

Why lose a weekend of sailing due to a missing 

part? Stored in a 5" x 12" zippered pouch, this 

kit contains the most frequently lost and needed 

items. Includes shackle tool, two drain plugs 

with gaskets, aluminum rudder pins, clevis pins 

and rings kit, 3/16" bow shackle, 1/4" bow 

shackle, and batten tie strings. The H-14/16 kit 

also includes 3 mast bearings. Pouch comes in 

assorted colors. 

J. 01-3221 H-14/16 $69.00 

01-4221 H-18 $65.00 

01-8221 Nacra ® $69.00 

01-5221 Prindle ® $72.00 

K . PINS & RINGS KITS 

Have you ever spent 

the whole day sifting 

through the 

sand, looking for 

that lost split ring? 

Be prepared with 

K 

this handy assortment of the most commonly 

lost or bent shackle and clevis pins with split 

rings for the standing rig and mast stepping 

systems. All kits include mast hinge pin(s), 

clevis pin assortment, split ring assortment, and 

replacement shackle pin(s). 

K. 01-3031 H-14/16 17 pieces $15.50 

01-3522 H-17/20 20 pieces $22.50 

01-4031 H-18 15 pieces $16.50 

01-8031 Nacra 18 pieces $21.00 

01-5031 Prindle 13 pieces $18.00 

L M N 

L-N. DRAIN PLUGS 

All drain plugs include gasket except #27-2064 

Laser Bayonet Plug. Each. 

L. 01-0052 Universal Plug – Fits all Hobies 

® , Nacras, Prindles $3.25 

M. 50-91281000 Wave/Older H-20 $4.50 

N. 27-2064 Laser Bayonet Plug $3.25 

FACTORY REPLACEMENT PARTS 

Don't see what you need? We maintain a 

stock of many factory replacement parts 

for Hobies, Nacras and Prindles that are not 

listed in this catalog and we are happy to 

special order items that we do not have in 

stock. Used parts such as sails, crossbars, 

hulls, etc. are sometimes available. 

Please be aware that Sol Cats are no longer 

being manufactured and new replacement 

parts specific to that catamaran are not available. 

Used parts are frequently available. 


J 

O 

P Q 

O-Q. DRAIN PLUGS WITH BASES 

The molded recess in the base traps the sealant 

in place, providing a more watertight seal. 

Lightweight and inexpensive. Gasket included. 

O. 01-0051 Plug with Molded Nylon Base– 

each $5.00 

P. 21-0737 Plug with Stainless Housing– 

each $10.75 

Q. 27-2066 Laser Plugs with Base– pair 

$9.95 

MAST ROTATION CONTROL ARM 

For Hobies ® , Nacras and Prindles. Stainless, 

strong and smooth! Arm with 5/16" holes is for 

Prindles. 

25-3040 Arm with 1/4" Holes $33.80 

25-3041 Arm with 5/16" Holes $38.80 

19-2227 Bolt: 1/4-20x4.5" H-17, 20, Nacras 

$2.30 

19-2226 Bolt: 1/4-20x5" H-17, 18 $2.70 

19-2237 Bolt: 5/16-18x4.5" Prindle $2.90 

19-2516 Nut: 1/4-20 $.45 

19-2520 Nut: 5/16-18 $.50 

27

SWIVEL CLEATS & BASES FAIRLEADS & SHEAVES 

A 

B 

A-C. SWIVEL 360 CLEATS 

Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Use a “heavy 

duty” swivel for spinnaker sheet control or H-20 main traveler control. Cam cleats and fairleads should 

be selected on the basis of need. Order plastic base pads and fasteners separately. Small Ronstan swivel 

features small C-cleat with fast track fairlead and bull's-eye fairlead. Line size: 1/8"-5/16". 

A. 25-3020 Heavy Duty Swivel, Aluminum Cam-Matic ® Cleat, Roller Fairlead $80.00 

25-3014 Swivel, Aluminum Cam-Matic ® Cleat, Bull's-eye $65.00 

B. 25-3010 Swivel, Carbo-Cam Cleat, Bull's-eye $57.00 

25-3012 Heavy Duty Swivel, No Cleat, No Bull's-eye $28.00 

C. 21-0067 Ronstan Small Swivel 360 $56.70 

21-0058 Ronstan Large Swivel 360 $66.20 

PLASTIC BASE PADS 

Use a base pad to mount a cleat on a surface which is not flat, such as a crossbar. Swivels mount 

on 3-hole plastic base pads. Select bases that are appropriate for the installation. Use flat base pad 

(#25-3001) to mount swivel cam to flat decks, elliptical pad (#01-0109) for Hobie ® (except for 

H-20) or Prindle crossbars, or round pad (#01-8014) for Nacra and H-20 crossbars. 

D. OFFSET BASE PAD KIT 

Offset base fits Hobie ® and Prindle elliptical crossbars. 

Includes base and fasteners. 

07-1162 Complete Kit $9.25 

Replacement Fasteners: 

19-1620 Self-Tapping Screw (order 3) $.34 

19-1516 Machine Screw (order 1) $.25 

19-2016 Nut (order 1) $.16 

E. CONTOURED BASE 2" ROUND 

Polyurethane bases provide flat mounting 

surfaces for mast rotation control cleats, 

barberhauler cleats, or H-16 jib trim cleats. Use 

to mount Harken Micro Cleat (#28-0338 or 

#28-0423), small Ronstan C-Cleat (#21-5000), 

or Ronstan Small or Large Swivel 360 Cleats 

(#21-0067 or #21-0058). Each base can be 

port or starboard, depending on how cleats are 

installed. #10 FHSMS is an appropriate length. 

Base is 2" in diameter. 

01-0109 Fits Hobie ® or Prindle Elliptical 

Crossbar $5.50 

E 

F-G. BASE KITS 

FOR SWIVEL 360 

CLEATS 

For Harken ® , Hobie ® or 

Murray 360 cleats without 

swivel base adapters. 

Kits include one 3-hole base, one swivel base 

adapter (#25-3001), plus three #10 FHSMS 

(#19-1626). Ronstan swivel 360 cleats include 

swivel base adapters, so this kit is not necessary. 

F. 01-0110 Kit fits Hobie ® G 

or Prindle 

Elliptical Crossbar $9.50 

G. 25-3001 Swivel Bar Adapter $3.00 

19-1626 Replacement Screw: #10 x 1.5" 

FHSMS $.36 

D 

F 

C 

ROLLER FAIRLEAD 

Retrofit bull'seye 

fairleads on 

swivel cams 

with low 

friction roller 

fairleads! Fasteners 

included. 

25-3002 Complete Kit $15.00 

00-3002-4 Replacement Plastic Roller 

$2.50 

00-3002-3 Replacement Stainless 

Bushing $1.60 

19-2915 Replacement Screw– each 

$.36 

FAIRLEAD STRAPS 

BULL'S-EYE FAIRLEAD 

Stainless ferrule eliminates grooving. Line 

capacity: 7/16". Mounts with two screws (order 

separately). 

25-0323 Bull's-eye with Ferrule $6.00 

19-2915 Screw #10-32x1" $.36 

Item # Description A B C Price 

25-0338 Mini 1" (25mm) 1/4" (6mm) 3/16" (5mm) $1.40 

28-0281 Micro 1-1/16" (27mm) 3/8" (10mm) 5/32" (4mm) $1.40 

23-0921 Small 1-1/4" (31.4mm) 1/2" (12.7mm) 3/16" (5mm) $1.60 

25-1065 Large 1-7/16" (36.5mm) 5/8" (16mm) 3/16" (5mm) $2.75 

28-0137 Harken ® 1-1/2" (38.1mm) 3/4" (19mm) 1/4" (6mm) $2.40 

21-0499* Ronstan 1-1/8" (28.6mm) 3/8" (9.5mm) ferrule 5/32" (4mm) $4.45 

*Eyestrap with Ferrule Eye 

REPLACEMENT SHEAVES 

Item # / Description A B C D Price 

21-0251 Mast Head N-5.5/5.8/6.0, Prindle 16, Sol-18 

3/8" (10mm) 3/8" (10mm) 1-1/2" (38mm) 1/4" (6mm) $4.00 

28-0160 Replacement Harken ® Ball Bearing H-17/20 

15/32" (12mm) 17/32" (14mm) 1-3/16" (30mm) 1/4" (6mm) $9.30 

50-60620000 Mast Head/Base H-18 

3/8" (10mm) 3/8" (10mm) 1" (25mm) 1/4" (6mm) $7.00 

21-1741 Prindle Rudder (upper upgrade) 

1/4" (6mm) 1/4" (6mm) 3/4" (19mm) 1/4" (6mm) $2.50 

56-6503 Mast Head N-5.0/5.2/5.7 

1/2" (12mm) 1/2" (13mm) 1-3/4" (44mm) 9/32" (7mm) $6.00 

56-6804 Mast Head & Base P-18/18.2/19, Nacra 

3/8" (10mm) 13/32" (11mm) 1-1/8" (28mm) 1/4" (6mm) $8.20 

28-0415 Ball Bearing Sheave for 16mm Air Block 

5/16" (8mm) 5/16" (8mm) 5/8" (16mm) 3/16" (5mm) $8.40 

50-20614210 Comp-Tip Mast Head Sheave 

9/16" 5/8" (16mm) 2-1/4" (57mm) 3/8" (10mm) $5.50 


A-K. HARKEN ® CAM-MATIC ® CLEATS AND FAIRLEADS 

Cam-Matic ® ball bearing cam cleats engage and release easily, hold securely, and work with a wide 

range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not 

required to close the pawls. Multiple rows of UV-stabilized, Delrin ® ball bearings provide minimal 

friction for easy line engagement and release, even under high loads. The easy entry system allows 

line to engage without being drawn through the cam; just pull the line straight down and the cam 

opens and holds perfectly. Aluminum Cam-Matics® are Hardkote-anodized for high-load, high-wear, 

continuous adjustment applications. Lightweight, fiber-reinforced Carbo-Cams® are for racing where 

weight is critical, or where adjustments are less frequent. A fairlead allows the cleat to be used when 

lines enter or leave the cam at unfair angles. Fairleads are constructed of fiber-reinforced plastic and/or 

stainless steel. 

C 

D 

A B 

E 

STANDARD CAM-MATIC CLEATS 

& ACCESSORIES 

Aluminum: 1/8" to 1/2" line; MWL: 300 lbs. 

Carbo-Cam: 1/8" to 3/8" line; MWL: 200 lbs. 

Fastener: #10 (5mm) with 1-1/2" spacing. 

A. 28-0150 Aluminum Cam-Matic 

Cleat $35.25 

B. 28-0365 Carbo-Cam Cleat $27.00 

C. 28-0328 Fairlead $12.75 

D. 28-0375 X-Treme Angle Fairlead for 

150 $15.50 

E. 28-0137 Eyestrap $2.40 

28-0145 Cam Wedge Kit $5.15 

F. 28-0425 Flairlead (max. line size 

3/8") $5.75 

19-2918 Screw #10-32 x 2" Phillips Head 

for #150 & 365 Cleats 

(need 2) $.55 

28-0145 Cam 15° Wedge Kit $5.15 

28-HSB14 Bearing for Standard Cam-Matic: 

Aluminum #150 order 66; Carbo 

#365 order 46 $.12 

28-0056 Cam Spring $4.00 

F 

L M N 

L-M. RONSTAN CLEATS 

Ronstan's carbon V-cleats are strong, lightweight and inexpensive. They serve the same function as 

Clamcleats ® O P Q R S 

, but the carbon construction makes them lighter and less expensive. Use 3/16" countersunk 

rivet or #8 screw. Maximum working load is 440 lbs. 

L. 21-5100 V-Cleat Open 1/8"-1/4" $5.70 

M. 21-5101 V-Cleat Fairlead 1/8"-1/4" $6.20 

K-P. CLAMCLEAT ® ROPE CLEATS 

Replace old, worn-out outhaul and downhaul Clamcleats ® . Aluminum cleats are stronger than nylon 

and have increased wear resistance; nylon cleats are less expensive. Easy to mount. #254 line capacity 

5/32"-5/16"; #253 line capacity is 1/4"; #209 line capacity is 3/16"-5/16"; #702 and #236 line capacity 

is 1/8"-1/4". 

N. 27-0209 Clamcleat Midi– No Roller: Nylon $5.25 

O. 27-0254 Clamcleat Racing Midi: Aluminum $13.60 

P. 27-0702 Clamcleat– No Roller: Aluminum $13.80 

Q. 27-0236 Clamcleat with Low-Friction, Top Roller Fairlead: Aluminum $18.95 

R. 27-0253 Clamcleat with Base Roller: Aluminum (use for trapeze adjustment) $25.60 

S. 27-0253A Clamcleat Hard Anodized $26.95 

G 

H 

MICRO CAM-MATIC CLEATS 

& ACCESSORIES 

Aluminum: 1/8" to 1/4" line; MWL 200 lbs. 

Carbo-Cam: 1/8" to 1/4" line; MWL 150 lbs. 

Fastener: #8 (4mm) with 1-1/16" spacing. 

28-0468 Aluminum Micro 

Cam-Matic $27.95 

G. 28-0471 Micro Carbo-Cam $24.60 

28-0297 Cam Wedge Kit $4.10 

H. 28-0476 X-Treme Angle Fairlead 

$13.75 

I. 28-0281 Eyestrap $1.40 

K. 28-0424 Flairlead $5.00 

19-1622 Screw #8 x 1-1/2" for Micros 

(need 2) $.32 

To properly maintain hardware, rinse 

frequently with fresh water and lubricate 

moving surfaces with Sailkote (#40-0401). 

J 

K 

V 

W 

O-R. RONSTAN CARBON FIBER 

CAM CLEATS 

Lightweight and durable with quick response and 

easy entry/exit effort. Outstanding grip, corrosion 

resistant (no aluminum cams). Fast Track Fairlead 

option permits widest range of cleating angles 

without need for rotation. Saves complexity, 

weight and cost for barberhauler control cleats. 

Small: 3/32" to 5/16" line; SWL 265 lbs. 

Fastener size: 3/16", #10, (#19-1626). 

Medium: 1/8" to 1/2" line; SWL 400 lbs. 

Fastener size: 3/16", #10, (#19-1626). 

T. 21-5000 Small C-Cleat $23.10 

U. 21-5010 Medium C-Cleat $27.30 

21-5016 Riser Pad for Medium 

C-Cleat $6.85 

V. 21-5005 Fast Track Fairlead 

Small $6.45 

21-5015 Fast Track Fairlead 

Medium $7.70 

21-5004 Rope Guide Wire Small $6.30 

W. 21-5014 Rope Guide Wire Medium 

$7.35 


T 

U 

Is line slipping in your cleat? Line size, 

surface texture and core characteristics are all 

factors which should be evaluated. 

2005 Hobie Tiger Worlds 

CLEATS 

S-T. MAST CLEAT KITS 

Halyard Cleat Kit includes Hobie ® cleat, stainless 

rivets and rivet casings. Downhaul Cleat Kit is for 

mounting in mast track (eg. H-16) and includes 

cleat, screws and inserts. 

X. 01-1019 Halyard Cleat Kit with Rivets 

$10.00 

11-6481 Cleat Only $6.00 

19-5033 Rivet CCP 6-8 3/16" x 1/2" 

$.75 

19-5020 Rivet Casing $.70 

Y. 01-1020 Downhaul Cleat Kit with Screws 

& Channel Inserts $12.00 

19-3500 Screw– Each 10-32x7/8" 

$.40 

03-0190 Insert– Each $2.00 

X 

Y 

Z 

AA 

Z-AA. HARKEN ® PIVOTING BLOCKS 

Harken Swivel 180's swivel a full 180° and 

feature heavy-duty, stainless, pivoting exit 

blocks with cleats. Choice of Cam-Matic ® 

cleats. Includes fairleads. To mount in mast 

sail track, order two channel inserts and two 

screws. See Cam-Matic ® cleats for line capacities. 

Z. 28-0291 Harken Pivot 180 Block 

with Micro Cam-Matic $70.25 

28-0022 Clevis Hinge Pin for #291 $2.50 

AA. 28-0140 Harken Pivot 180 Block 

with Cam-Matic $95.00 

28-0022-1 Clevis Hinge Pin for #140/141 

$4.00 

Bullseyes & Roller Fairleads ......... pg 28 

Leech Line Cleat .......................................39 

29

CONVENIENCE ITEMS 

B 

A 

C 

D 

A. TOGGLE PIN WITH LANYARD 

For pin without lanyard, remove “L” from item 

number. 

21-1155L 1/4" x 5/8" $13.50 

21-1153L 1/4" x 3/4" $17.25 

21-1157L 1/4" x 1" $14.00 

21-1159L 1/4" x 1-1/4" $14.25 

B-C. SISTER CLIP 

Micro does not have slot. Each. 

B. 04-7730 Micro $3.50 

C. 21-0536 Mini $3.50 

D. CARABINER HOOK 

316 stainless steel hook has 1/4" diameter, 

2-3/8" length, weighs .08 lb. with 700 lb. 

breaking strength. 

22-4156 $6.00 

H-16 CONVENIENCE PACKAGE 

This package makes set-up and take-down of 

your Hobie 16 more convenient. Includes bold 

items in the chart below. 

01-3231 $75.00 

Application 

Hiking Stick to Crossbar 

Jib Tack Connection 

Mainsheet Block 

to Boom 

Mainsheet Block 

to Traveler Car 

Jibsheet Blocks 

to Jib Clew 

Boom to Mast 

Main Clew to Outhaul 

Forestay to Adjuster 

Shock Cord Connect 

Rudder Line Handle 

Main Halyard Shackle 

Spring Clip – 

Rudder Pin Retainer 

Jib Sheet Blocks 

Mast Step Pin 

Bridle Wires 

E 

E. QUICK RELEASE SHACKLE 

01-3233 3/16" $29.00 

01-3232 1/4" $31.00 

F. SNAP SHACKLE 

WITH SWIVEL TACK 

F. 22-4501 Snap Shackle with 1/4" Clevis 

Pin $39.00 

22-9806 Replacement Clevis Pin 3/16"x7/8" 

(Use to connect swivel shackle to 

an item that requires a 3/16" clevis 

pin.) $1.25 

SNAP SHACKLE 

WITH SWIVEL EYE 

Same as #22-4501, but with 

swiveling base. 

22-4521 $36.00 

PLASTIC CARBINE HOOK 

A quick connection of 

trapeze shock cord to 

height control adjustment. 

2-1/4". Each. 

01-0127 $1.60 

G H 

G-H. AUSSIE MAIN HALYARD RINGS 

If you're having trouble raising or lowering your 

mainsail due to a faulty halyard ring and shackle, 

this upgrade will help. Welded ring and lanyard 

give you more positive control while hooking or 

unhooking the ring to the hook. Use on any boat 

that uses a hook at the mast head and a ring and 

shackle at the head of the sail. Personal preference 

dictates which one you choose. 

G. 01-4216 Murrays Aussie Ring $25.00 

H. 07-3064 Hobie ® Aussie Ring $31.00 

QUICK TWIST 

HALYARD SHACKLE 

Quick and convenient replacement 

for shackle with small 

threaded pin on H-16 jib clew 

block. No loose parts to lose! 

21-1032 3/16" Clevis 

Pin $15.75 

21-1033 1/4" Clevis Pin $17.10 

HALYARD GRIP KIT 

Guides the halyard to the side of the mast, keeping 

it out of the way so that the jib is less likely to 

hang up on it when tacking. 

07-1140 $4.55 

CONVENIENCE ITEM CHART 

Speed set-up, add convenie 

on the chart have proven their effectiveness and strength! Items in bold face type are included in the H-16 Convenience Package #01-3231. 

F 

H-16 H-17 H-18 H-20 H-21 P-16/18/18.2/19 Nacra/Inter 

18-4R125 18-4R125 18-4R125 18-4R125 18-4R125 18-4R125 18-4R125 

18-4M125L 18-4M125L 18-4M125L 18-4D125 18-4M125L 18-4M125L 18-4M125L 

01-3232 01-3232 01-3232 01-3232 18-4M075L 

22-4501 

01-3232 01-3232 01-3232 22-4501 01-3232 01-3232 01-3232 

01-3233 22-4501 22-4501 pigtail 22-4501 22-4501 22-4501 

22-4501 28-0111 28-0111 02-0235-00 28-0111 28-0111 28-0111 

01-3232 01-3232 01-3232 01-3232 01-3232 01-3232 

18-3M075L 18-3M075L 22-4501 22-4501 28-0112 28-0112 28-0112 

28-0112 22-4501 22-4501 18-3M075 

21-1032 22-4156 

18-4D125 18-4D125 18-4D125 18-4R100 18-4D150 

01-3232 18-4M075L 22-4501 18-4M075L 18-4R100 

21-1155L 21-1155L 18-4M075L 18-4M075 (2) 18-4M075L 21-1155L 

18-4R075 18-4R075 18-4R075 

18-4M075L 18-4M075L 18-4M075L 

01-0127 (4) 01-0127 (4) 01-0127 (4) 21-1155L (2) 01-0127 (4) 01-0127 (4) 01-0127 (4) 

27-0199 (2) 27-0199 (2) 

01-4216 01-4216 01-4216 01-4216* 01-4216 

25-2205 (2) 25-2205 (2) 25-2205 (2) 25-2205 (4) 25-2205 (2) 25-2205 (2) 25-2205 (2) 

21-0413 21-0413 21-0413 21-0413 21-0413 21-0413 

18-3R075 (2) 

18-4M075 (2) 

18-4D300 18-4D300 

*Except P-16. 

JIB HALYARD ROPE 

WITH SISTER CLIPS 

Little Sister Clips are a quick 

on/off halyard extension 

system. 

04-7732 H-18/20 

$16.50 

04-7734 Prindle 

$21.00 

ROPE END STOPS 

#27-0199 is available in assorted colors wih 1/4" 

hole; others are red only with 3/16" hole. Each. 

27-0199 1-1/8" Diameter $2.10 

21-1315 1-1/4" Diameter Barrel Bead $1.95 

21-1316 1" Diameter Barrel Bead $1.60 

21-1317 3/4" Diameter Barrel Bead $1.40 

21-1318 5/8" Diameter Barrel Bead $1.25 

ALL-PURPOSE TOOL 

Stainless tool is a wrench that 

fits nuts for 1/4" and 5/16" 

bolts. It's also a cam remover, 

screwdriver, bottle opener 

and shackle tool. Helps with 

shackle pins and drain 

plugs. 

01-0005 $6.95 

CAT SHACKLE TOOL WITH LANYARD 

Stainless steel tool is a screwdriver, bottle 

opener, shackle tool and open-end wrench for 

nuts that fit 1/4", 5/16" and 3/8" bolts. Also aids 

in getting pins out of shackles and loosening 

drain plugs. 

01-0006 $7.25 

Ball-Lok Pins ...................................... pg 31 

Shackles ......................................................31 


BALL-LOCK PINS 

One hand release—just push the button 

and pull. Uses include blocks, shackles 

and hiking sticks. Replace clevis pins of 

same diameters and similar grip lengths. 

See Convenience Package descriptions 

listed by boat type for specific recommendations. 

CAUTION: Do not use Ball-Lock Pins 

when receptor holes are oversize or outof-round. 

(Example: Beware of 7- and 

10-hole shroud adjusters.) 

Measurements shown are diameter x 

maximum grip length (distance from the 

shoulder to the locking ball bearings). 

A B C 

A. DETENT PIN 

Economical. A spring-loaded ball exerts sufficient 

pressure to avoid accidental release. 

18-4D125 1/4" x 1-1/4" $8.00 

18-4D300 1/4" x 3" $12.00 

B. STANDARD BALL-LOCK PIN 

Standard head with a ring pull. 

18-3R075 3/16" x 3/4" $20.00 

18-4R075 1/4" x 3/4" $19.00 

18-4R100 1/4" x 1" $20.00 

18-4R125 1/4" x 1-1/4" $21.00 

C. DELUXE BALL-LOCK PIN 

Features a deluxe dished head with a hole for 

lanyard attachment. No other locking pin is 

faster operating or safer. For addition of 

1/16"x 7" stainless lanyard with nicropress ovals, 

add letter “L” after item number. 

18-3M050 3/16" x 1/2" $22.00 

18-3M075 3/16" x 3/4" $24.00 

18-4M075 1/4" x 3/4" $24.00 

18-4M100 1/4" x 1" $25.00 

18-4M125 1/4" x 1-1/4" $27.00 

Ball-Lok pins should not be used where 

use might lead to de-masting or other 

catastrophic failure. 

Ball-Lok Pin Use Chart .................... pg 30 

Convenience Items .................................30 

SHACKLES 

Measurement shown is pi 

each size shackle on your 

individual shackles or consider a Spares & Repairs Kit, shown on page 27. 

D E 

D. SNAP SHACKLE WITH SWIVEL EYE 

Length is 2-3/4" with eye diameter of 1/2". 

SWL 1000 lbs. 

22-4521 $36.00 

E. SNAP SHACKLE 

WITH SWIVEL TACK 

For attaching Nacra jib tack. 2-3/4" long with 

1/4" pin diameter. SWL 800 lbs. 

22-4501 $39.00 


P. HEADLESS CLEVIS PIN 

22-9811 3/16" x 1-1/2" 

(H-16 mast step hinge pin) $3.50 

56-F128 3/16" x 3" Prindle $7.00 

22-9815 1/4" x 3-3/8" 

(H-18 mast step hinge pin) $4.00 

56-F158 1/4" x 2" 

(H-17, Nacra mast step hinge pin) 

$7.00 

Q. CLEVIS PIN 

22-9801 3/16" x 1/2" $1.00 

22-9805 3/16" x 5/8" $1.10 

22-9806 3/16" x 7/8" $1.25 

22-9807 3/16" x 1-1/4" $1.30 

22-9808 1/4" x 1/2" $1.20 

22-9802 1/4" x 5/8" $1.20 

56-4012 1/4" X 3/4" $2.00 

50-8020401 1/4" x 1" $1.60 

22-9803 1/4" x 1-1/8" $1.50 

22-9804 1/4" x 1-3/8" $1.65 

56-4586 5/16" x 2-3/16" $4.00 

56-4587 1/4" x 2-1/4" $3.00 

BALL-LOCK PINS & SHACKLES 

F-H. D-SHACKLE 

F. 21-0615 5/32" Slotted Pin $4.60 

21-0616 3/16" $4.35 

G. 21-0617 1/4" $6.50 

H. 21-0623 1/4" Long $7.30 

I. TWISTED D-SHACKLE 

21-0628 3/16" $7.25 

21-0629 1/4" $11.50 

J. BOW SHACKLE 

Shackle Pin Only 

21-0634 3/16" $5.25 21-0032 $2.20 

21-0635 1/4" $7.50 21-0033 $3.25 

21-0636 5/16" $10.25 

K. HARKEN STAMPED D-SHACKLE 

28-0072 3/16" $3.55 

28-0138 1/4" $5.70 

R-S. SPLIT RING 

R. 22-9492 For 3/16"-1/4" Pin 

$.40 

22-9493 For 5/16" & 3/8" Pin 

$.40 

A pigtail makes this split ring easier to 

open. 

S. 22-9491 For 1/4" with Pigtail 

$.35 

T. SAFETY PIN 

An alternative to the split ring. 

21-0126 $1.20 

U. COTTER PIN 

19-1015 3/32" x 3/4" $.18 

L. SWIVEL SHACKLE 

21-0120 3/16" $21.55 

21-0173 1/4" $25.95 

M. QUICK TWIST 

HALYARD SHACKLE 

With removable guard pin. 

21-1032 3/16" $15.75 

21-1033 1/4" $17.10 

N. 1/4" SHORT HALYARD SHACKLE 

1-7/32" long with fixed guard pin and springloaded 

captive pin. Max working load:1550 lbs. 

22-9343 $24.50 

O. 1/4" FLAT HALYARD SHACKLE 

1-7/16" long. Round profile for thimble 

connection. Max working load: 1700 lbs. 

50-10670000 $11.20 

CLEVIS PINS & RETAINERS 


F 

K 

G 

L 

H 

M 

CLEVIS PINS 

Clevis pins and retainers are stainless steel. Measurements shown are diameters x grip lengths 

(shoulder to the split ring hole). 

V-W. SPRING CLIP 

For quick rudder pin removal. Stainless. 

V. 21-0413 For 3/8" diameter $4.35 

W. 25-2204 For 1/4" to 5/16" diameter $.75 

W. 25-2205 For 3/8" diameter $1.25 

P 

Q 

I 

N 

R 

V W 

S 

X. TOGGLE PIN 

Replace clevis pins of same diameter and grip 

lengths. Each. See page 30 for toggle pins with 

lanyards. 

21-1155 1/4" x 5/8" $11.50 

21-1153 1/4" x 3/4" $15.85 

21-1157 1/4" x 1" $12.00 

21-1159 1/4" x 1-1/4" $12.25 

J 

T 

U 

O 

X 

31

RUDDER PINS 

WHICH RUDDER PIN? 

Consider your intended use. Aluminum is 

standard on Hobie ® and Prindle cats and 

is good for all-around, low maintenance 

use. Nylatron are sacrificial pins for use in 

the surf and should be inspected often for 

wear. Weight-saving, hollow stainless pins 

with stronger .065" wall provide reduced 

wear and the best long-term fit. 

RUDDER PINS 

H-14/16 

3/8" X 8". Pair. 

01-2271 Nylatron $12.00 

01-2272 Aluminum $16.00 

01-2269 Stainless Steel $22.00 

H-17/18/Wave/Getaway 

3/8" X 9-1/4". Pair. Universal pins are suited for 

all H-17/18/Wave rudder castings. 

01-4271 Nylatron $12.00 

01-4274 Aluminum $16.00 


H-21, Prindle & Nacra ® – Pair 

3/8" x 10-1/4" end-to-end, with hole at each 

end. 

01-5272 Aluminum $17.00 


H-20 – Each 

5/16" x 9-1/4" end-to-end, with 3/32" hole at 

each end. Cotter pins sold separately. 

50-40880011 Stainless Steel Pin $15.40 

19-1015 Cotter Pin 3/32" x 3/4"– each $.18 

RUDDER TITE KIT & BUSHINGS 

Tighten, insulate and reduce friction between 

rudder pin and rudder casting. Replaceable nylon 

bushings provide a smooth, nonconductive bearing 

surface which is ideal for use with stainless 

rudder pins. H-14/16 Kit includes 4 bushings, 2 

aluminum rudder pins and instructions. Note: 

Bushing requires 0.438" (7/16") hole in castings 

(use 7/16" reamer to enlarge hole in castings). 

Bushings fit H-17/18/21 castings without modification 

and replace Hobie ® -style nyliners. 

01-2283 H-14/16 Rudder Tite Kit $24.00 

01-2284 Bushing H-14/16/17/18/Wave 

each $2.25 

50-40340001 H-20 Upper $5.00 

50-40360001 H-20 Lower $5.00 

Rivet Tools ........................................... pg 14 

Rudders .......................................................33 

A 

A. RUDDER RETURN KITS 

These kits by Tren Tec eliminate kick-up. Rudders 

return to down position easily 

with one hand. Tension holds 

rudder down if a cam fails. 

All kits accommodate both 

rudders. 

A. 12-2049 H-14/16 Tren Tec Kit $15.00 

12-2059 H-17/18 Tren Tec Kit $15.00 

01-2240 Shock Cord 32" with Balls (pr) 

$7.25 

KISME KLEETS 

Stainless steel cleat replaces the plastic ones sold 

by Tren Tec as a rudder return kit. Package of 4. 

05-1010 

$8.00 

C 

B-C. RUDDER GUDGEONS 

Latest, strongest design with welded sleeve 

bushings provides large, smooth bearing surfaces 

between rudder pins and gudgeons. Replace 

flared gudgeons with their sharp edges and 

point loading that can cause early rudder pin 

failure. For H-14/16s, order separate upper and 

lower gudgeons. For all other Hobie ® cats, order 

#25-3352 for both gudgeons. Each. 

B. 25-3351 Upper H-14/16 $12.00 

C. 25-3352 Lower H-14/16: all others, 

upper & lower $26.00 

19-3520 RHMS #12-24 x 1.25" Repl 

Screw (Each) $1.10 

50-8030401 Hobie® Gudgeon Lock Screw 

(16/pkg) $18.40 

50-F18056012 Tiger Gudgeon Upper 2008 

$21.00 

50-F18056014 Tiger Gudgeon Lower 2008 

$21.00 

50-F99226001 Screw for Tiger Gudgeon $.70 

ONE-PIECE RUDDER 

GUDGEON 

Strongest available and standard 

on newer boats! One-piece 

gudgeons are always in perfect 

alignment! Excellent replacement 

for boats that have lost 

the use of one or more gudgeon 

screws because this uses more 

fasteners. H-18 gudgeon 

includes pin. Each. 

50-50102011 H-14/16 $38.95 

50-60102011 H-18 $56.00 

19-3520 Machine Screw (order 8 for H- 

14/16; 10 for H-18) $1.10 

B 

RUDDER KITS FOR HOBIES ® 

D. TILLER CONNECTION KIT 

Assures consistent rudder alignment 

through the full rudder sweep. 

Spring-loaded half balls and 

contoured spacers take the slop 

out of the tiller-to-crossbar 

connection. Racing 

class legal. 

D. 01-2061 Kit (Pair) $11.00 

01-0061 Contoured Spacer-Each $.80 

01-0059 Half Ball-Each $.35 

01-0060 Spring $2.00 

19-2221 Hex Bolt 1/4-20 x 2-1/4" $1.20 

19-2516 Nut 1/4-20 $.45 

F-G. RUDDER ALIGNMENT 

Adjustable end cap replaces short cap on tiller 

crossbar. Each. 

F. 50-60400011 Adjustable End Cap $17.00 

G. 50-10400010 Tiller Arm End Cap $12.95 

50-20520011 Crossbar with Hobie ® Caps $143.00 

F. RUDDER CAM KITS 

Replacing worn rudder cams helps keep 

your Hobie's rudder lock-down mechanism 

functioning properly. Kits include two cams, 

two reusable, internally threaded sister screws 

for both sides, and instructions. Purchase the 

complete kit if your boat has the stock flare pins; 

purchase just the cams if your boat already has 

sister screws as shown. 

F. 01-2050 H-14/16 Kit $28.00 

01-3550 H-17/18/20/21/Wave/Getaway 

Kit $33.25 

01-2051 H-14/16 Sister Screws Only 

(pair) $16.00 

01-3551 H-17/18/20/21/Wave/Getaway 

Sister Screws Only (pair) $18.00 

Factory replacement parts (each): 

50-10480000 Cam Only $7.70 

50-10440000 Plunger Only H-14/16 $3.10 

50-50312201 Plunger Only H17/18/20/21/ 

Wave/Getaway $5.80 

50-10430000 Spring Only $6.80 

50-60450000 Delrin Screw Only 

(Tap size 3/4-10) $8.00 

50-10311900 Rudder Locking Kit H-14/16 

(Includes 1 each: plunger, 

spring, screw) $16.00 

H-18 RUDDER CONVERSION KIT 

Upgrade your pre-1986 H-18 to the latest rudder 

kick-up system. Pre-'86 lower rudder castings 

have aluminum lock down cams. Post-'86 

lower castings have plastic lock down cams 

with improved locking action. Kit contains two 

lower castings with improved locking action, 

two upper castings with arms and end caps, 

four gudgeons with mounting screws and 

locking washers, rudder pins and instructions for 

gudgeon mounting and rudder redrilling. 

50-60331010 $630.00 


F 

E 

D 

E. H-20 STYLE TILLER CONNECTOR 

& ADJUSTER KIT 

The H-20 tiller connection system has been 

adapted as a retrofit for all Hobies ® ! Easy to 

adjust with an exact, snug fit. 10 seconds to 

install/remove tiller crossbar. Replacement parts 

are also available. 

E. 07-1953 Kit $128.95 


50-40540001 Adjustment Arm $27.90 

50-40550001 End Cap Threaded $10.00 

50-40561001 Tiller Connector End Cap 

1995 & Later $11.00 

50-40590001 Retainer Clip $1.60 

TENDON FOR GETAWAY 

TILLER CONNECTOR 

50-37561011 $8.60 

G 

Other factory replacement parts 

are also available for many boats. 

F 

RUDDER STIFFENING KIT 

For all Hobies ® . Eliminate excessive clearances 

between rudders and castings which cause 

wobble and thwart rudder alignment. Kit has 4 

stainless nylock nuts and 8 spacers. 

01-2053 Kit with 8 spacers $6.00 

01-0053 Spacer Only (Each) $.50 

19-2520 Nut Only (Each) $.50

RUDDER KITS RUDDERS & DAGGERBOARDS 

PRINDLE RUDDER SYSTEM 

A. PRINDLE RUDDER ALIGNMENT & CROSSBAR ASSEMBLY 

For easy adjustment of rudder parallelism. Adjustable end cap fits to end of Prindle 

tiller crossbar. Simply lengthen or shorten crossbar to toe-in or toe-out 

rudders. Aluminum. Each. 

A. 56-5106 Adjustable End Cap $126.00 

56-5000 P-15/16/18 Crossbar with Caps– 73.5" x 15/16" ID 

$299.00 

56-5008 P-19 Crossbar without Caps– 81.75" x 15/16" ID $129.00 

TILLER & RUDDER STIFFENING KIT 

FOR PRINDLES 

For Prindles. Spring-loaded tiller connection with 

contoured spacers tightens the hinge connection. 

Six plastic shims reduce slop between rudders 

and castings. 

01-5141 $12.75 

G 

H 

G-H. NACRA PIVMATIC KICK-UP 

Positive, reliable and easy to install. Nacra 

rudders automatically kick up on contact with 

submerged objects with this rudder release 

fitting. Complete kit for one side as shown or 

replacement parts available. 

G. 56-0266 Kick-up Kit $32.00 

Heavy-duty aluminum cleat is not as susceptible 

to wear and stripping. 

H. 56-0266-1 Kick-up Kit with Aluminum 

Cleat $40.00 

Replacement Parts: 

56-0151 Pivmatic Bracket Only $21.00 

27-0209 Repl. Clam Cleat Only Plastic $5.25 

27-0254 Repl. Clam Cleat Only Aluminum 

$13.60 

22-9804 Clevis Pin Only 1/4"x1-3/8" $1.65 

22-9492 Split Ring 3/16"-1/4" $.40 

E 

D 

On Prindles, check 

for proper alignment 

of the lock bolt to spring 

bolt. Any bent component 

will prevent the system from 

working properly. Identify 

and replace the bent portion 

to get your rudder system 

functioning correctly. 

B-F. PRINDLE RUDDER LOCK 

ASSEMBLY 

B. 21-1741 Plastic Roller—Upper $2.50 

C. 56-4016 Spring $4.00 

D. 56-4017 Rudder Lock Bolt $28.00 

E. 56-4018 Lockbolt Jam Nut $.40 

F. 56-4019 1/2 Round Load Spreader $22.00 

56-F118 Washer $.50 

56-4014 Plastic Spacer for Lower Rudder 

$.50 

NACRA TILLER TIE BAR 

UPGRADE KIT 

Improved tiller connect for older boats. 

56-5516 $51.00 

F 

A 

C B 

NACRA RUDDER ALIGNMENT & 

CROSSBAR 

56-5508 Adjustable End Cap– All Nacras 

$138.00 

56-C608 Tiller Crossbar Tube 7' 

(measure, cut & drill) $82.00 

When rebuilding Prindle and Nacra rudder 

systems, make replacement pull-down lines 

using 3/16" prestretched line as follows: 

Prindle: Four 4-foot pieces 

Nacra: Two 4-foot pieces 

For Nacra rudder pull-up, use 5-feet of 5/16" 

shock cord. 

HOBIE ® FACTORY RUDDERS & DAGGERBOARDS 

PCG = Solid molded white plastic 

FG/F = White fiberglass/foam 

EPO2 = Epoxy 

HOBIE ® CENTERBOARDS & 

DAGGERBOARDS —EACH 

OVERSIZED SHIPPING RATES APPLY 

50-50351001 H-17 White FG/F $308.00 

50-60300001 H-18 White FG/F $532.00 

50-40330001 H-20 White FG/F $560.00 

HOBIE ® RUDDERS — EACH 

H-14/16/17/18/Wave/Getaway Blade 

50-20493000 White PCG $132.00 

EPO2 Rudder Blades 

for H-14/16/17/18/Wave/Getaway 

EPO2 next-generation performance rudder blades 

combine Hobie's proven foil shape with a fine 

trailing edge to offer reduced cavitation and hum 

with smoother, more forgiving control. Hand 

laid fiberglass construction with extra cloth incorporated 

in all the right places ensures that the 

EPO2 blades are tough enough for even the most 

demanding sailors using extreme mast rake. 

50-20490020 EPO2 Carbon Epoxy $250.00 

Blades for Other Hobies 

50-40490001 H-20 White FG/F $275.00 

50-30490001 H-21 White FG/F $359.00 

50-F99502280 H-Tiger White FG/F 2008 

$300.00 

When upgrading from standard Hobie ® Cat 

blade to fiberglass or epoxy, buy a matching 

pair so that both rudders perform alike. 

Rudders and daggerboards 

may be oversized for shipping purposes, 

depending on shipping method. 

PERFORMANCE CATAMARANS RUDDERS & DAGGERBOARDS 

The only racing class legal equipment for Nacra and Prindle cats! Superior strength and consistent 

quality. Special high-density foam core with carbon reinforcement in the 5.8/6.0 daggerboards. One year 

warranty on workmanship and materials. 

PERFORMANCE CAT RUDDERS — EACH 

56-4022 Prindle 15/16/18 $120.00 

56-4225 Prindle 18.2/19– Upgrade 

$160.00 

56-1006 Prindle 18.2/19 Retrofit Kit– 

Extended gudgeons, tiller arms; 

Fits P-19/trim to fit P-18.2 

$221.00 

56-4517 Nacra 5.0/5.7 (Long) $155.00 

56-4528 Nacra 5.2/5.5/5.8/6.0/18sq $130.00 

56-4580 Inter 17/18/20 Old Style $170.00 

56-4599 Nacra 570/590/F17 $170.00 

PERFORMANCE CAT CENTERBOARDS 

& DAGGERBOARDS — EACH 


56-1026 Prindle 18.2/19 $245.00 

56-1030 Nacra 5.2/5.5 $230.00 

56-1032 Nacra 5.8/6.0 $230.00 

56-4585 Inter 17/18/20 $355.00 

Rope ...................................................... pg 15 

Rudder & Daggerboard Covers ..........59 


Photo: Team Alexander 

33

TRAMPOLINES & ACCESSORIES 

BLACK MESH TRAMPOLINES 

Heavy duty, black, polypropylene mesh material is 

durable and practical. Not only is it nearly impervious 

to environmental degradation, it will not let water 

pool. These aftermarket tramps differ from Hobie ® 

factory tramps because they are stitched instead of 

heat welded. Black mesh tramps for Hobies ® are a 

3-piece design with an extra-wide aft lacing strip; 

mesh tramps for most other cats are 1-piece. Nonfactory 

tramps for Hobies ® are not class legal for racing. Lacing kit is not included. 

Black Mesh Tramps for Hobies ® 

30-3100 Wave Club $285.00 

30-3101 H-14 with Turbo $310.00 

30-3102 H-16 $325.00 

30-3103 H-18 $345.00 

30-3103-1* H-18 Magnum Wings $305.00 

30-3104 H-17 3-Piece (no straps) $320.00 

30-3104-1 H-17 Wing (pr) $232.00 

30-3106* H-20 $436.00 

30-3105 H-21SE (the wide one) $390.00 

30-3105-1 H-21SC/18SX Wings (pr) $322.00 

30-3091 Getaway Forward $265.00 

Black Mesh Tramps for Prindles 

30-3121* P-15 $362.00 

30-3122 P-16 $375.00 

30-3123 P-18, Escape $390.00 

30-3124* P-18.2 & P-19 $419.00 OVERSIZED SHIPPING RATES MAY 

* Special orders: Allow 2 to 4 weeks for delivery. 

Custom tramps: We use your old tramp as a pattern. 

ONE-PIECE BIAS-CUT TRAMPS 

One-piece tramps provide a smooth, uncomplicated deck. All of these bias-cut black mesh tramps 

include an 11"x12" pocket, adjustable hiking straps and lacing line flap on Nacra/Prindle 19's . 

Two-year warranty on workmanship and materials. All are special order; please allow 2 to 4 weeks 

for delivery. Please call regarding available options . 

30-3101-1 H-14 1-Piece Bias $340.00 

30-3102-1 H-16 1-Piece Bias $371.00 

30-3104-2 H-17 1-Piece Bias $330.00 

30-3103-2 H-18 1-Piece Bias $385.00 

30-3142 N-5.2 with hull #520 or less – 

74" wide $379.00 

CHOOSING LACING FOR YOUR TRAMP 

SHOCK CORD 

For recreational sailors, shock 

cord is usually the better choice 

over line tramp lacing. Just “set 

it and forget it” because shock 

cord maintains the tension you 

set when lacing your tramp. 

Shock cord also reduces tramp 

and grommet wear because 

the load is spread over multiple 

grommets, especially when 

walking on the tramp. The latest technology shock cord used in 

our kits is designed for durability and longevity. 

LINE 

Line offers a longer-lasting option over shock cord and is the 

better choice for sailors who prefer a very tight tramp. As the 

line stretches slightly over time, sailors can re-tension the tramp 

lacing to their liking. Our standard kits include black, abrasionresistant 

low stretch line. 

For an alternative favored by racers, tramp line kits with smaller 

diameter, high-tech Dyneema® line are also available. Not only 

is Dyneema® line stronger and lighter in weight than 8-strand 

line, it has almost no stretch and has excellent ultraviolet and 

abrasion-resistance properties. Race kits include gray, 3mm and 

2mm Dyneema® line as specified at right. 

Black Mesh Tramps for Nacra 

30-3141* N- 5.0 $340.00 

30-3143* N-5.5SL $396.00 

30-3144* N-5.7 $378.00 

30-3145 N-5.8 $363.00 

30-3146* N-6.0 $396.00 

Black Mesh Tramps for Other Cats 

30-3171* Sol 15 $340.00 

30-3172 Sol 18 $365.00 

30-3184* Freestyle 474 $379.00 

30-3186* Venture 15 $376.00 

30-3190* Super Cat 17 old style $529.00 

30-3191* Super Cat 17 new style (aft slide) 

$436.00 

Also available: G-Cat, Mystere, Dart. 

APPLY TO TRAMPOLINES, 

ESPECIALLY FOR AIR SHIPMENTS 

30-3142-1 N-5.2 with hull # greater than 

#520 – 72" wide $380.00 

30-3143 Nacra 5.5 1-Piece Bias $396.00 

30-3145 Nacra 5.8 1-Piece Bias $363.00 

30-3161 Trac 14 1-Piece Bias $309.00 

30-3162 Trac 16 1-Piece Bias $363.00 

H-14 3-Piece 

50-10970000 White $360.00 

50-10970055 Black Mesh $466.00 

50-10970058 

H-16 3-Piece 

Turquoise Mesh $466.00 

50-20970000 White $384.00 

50-20970055 Black Mesh $509.00 

50-20970057 Blue Mesh $509.00 

50-20970058 Turquoise Mesh $509.00 

50-20970059 

H-17 3-Piece 

Gray Mesh $509.00 

50-50670000 White $416.00 

50-50670091 Black Mesh $567.00 

50-50670058 

H-17 Wing 


50-50650100 White Set $310.00 

50-50650900 

H-18 3-Piece 

Black Mesh Set $400.00 

50-60970000 White $426.00 

50-60970055 Black Mesh $562.00 

50-60970058 

H-20 1-Piece 


50-40970055 Black Mesh $899.00 

H-14/16/18 LACING KITS 

LINE KITS 

Line kits contain three lengths of line (one piece 19'; two pieces 14') and 

lacing instructions. 

01-2242 Standard– 3/16" 8-Strand Low-Stretch Black Line $22.00 

01-2242-1 Race– 3mm Dyneema® Gray Line $30.00 

SHOCK CORD KIT 

Our shock cord kit contains cinch rings and 35' (15' + 2 x 10') of 3/8" 

premium shock cord, enough for H-14, 16 or 18 tramps, plus instructions. 

01-2241 $45.00 

PRINDLE LINE LACING KITS 

The P-15/16/18/Escape kit includes two 11' lengths and two larger 

diameter 10'6" lengths. The P-18.2/19 kit has two 19' lengths. 

01-2246 P-15/16/18/Escape Standard– 5/32" & 3/16" 8-Strand 

Low-Stretch Line $16.50 

01-2246-1 P-15/16/18/Escape Race– 2mm & 3mm Dyneema® 

Line $23.00 

01-2248 P-18.2/19 Standard– 3/16" 8-Strand Low-Stretch 

Line $18.00 

01-2248-1 P-18.2/19 Race– 3mm Dyneema® Line $24.00 

TRAMP SLUG SLIDE 

Use for lacing tramp to rear crossbar to eliminate the need for 

an aft lacing strip. The slug can also be used in sail track. 

56-9892 $3.00 

FACTORY REPLACEMENT 

TRAMPS 

Hobie ® trampolines are available in 

white solid or colored mesh vinyl 

and are heat welded for longevity. 

For Hobie Cat ® class racing, factory 

replacement tramps are the only 

class-legal choice. In choosing a 

tramp, keep in mind that vinyl 

tramps keep sailors drier; mesh 

allows the wind and water to 

flow through, preventing puddling and helping to prevent mildew. Lacing kit is not included except 

where noted. Check with us regarding availability of other factory tramps. 

H-21 Sport Cruiser Forward Tramp 

50-36980055 Black Mesh $608.00 

H-21 Sport Cruiser 1-Piece 

with side lacing 

50-36970000 

Getaway 

White $585.00 

50-37980055 Black Forward $615.00 

50-37970058 Turquoise $556.00 

50-37971058 Turquoise Wing $170.00 

H-18SX/21 Wing 

50-68040255 Black Mesh Set $532.00 

Wave (Club tramps are 3-piece) 

50-38970000 White 1-piece $582.00 

50-38970055 Black Mesh 1-piece $640.00 

50-38970057 Blue Mesh 1-piece $640.00 

50-39970000 Club White $400.00 

50-39970055 Club Black Mesh $466.00 

50-39970057 Club Blue Mesh $466.00 

50-39970058 Club Turquoise Mesh $466.00 

Inter (includes lace line kit) 

56-9202 Inter 18/20 Black $504.00 

Halyard Pouch ...............................pg 58 

Rope & Shock Cord ............................ 15 

Zippered Pouches & Packs .............. 58 

3M MARINE VINYL CLEANER/ 

RESTORER 

Cleans, shines, conditions and protects in 

one easy step. Deep cleans dirt and grime from 

vinyl, rubber and plastic surfaces while leaving 

behind a natural carnauba wax protective 

coating. 15 oz. spray. 

40-9023 $13.99 

TRAMP CLAMP 

Minimize chafing 

at trampoline stress 

points and reduce 

the possibility of the 

trampoline pulling 

out of the aluminum 

extrusion. Clamps 

slide into the aluminum 

extrusion track. 10 pieces, 1.5" long. By Tren Tec. 

12-0010 $9.25 

HIKING STRAP WEBBING 

Black webbing is 2" wide and is sold per foot. 

30-3520 $1.50 


TRAMP ACCESSORIES & NON-SKID HIKING STICKS 

WHY USE NON-SKID? 

The single greatest obstacle to successful high wind performance sailing is lack of proper footing. 

Adequate deck and sidebar traction for sitting or standing is needed for sailing in even light to 

moderate wind. Properly placed footstraps are essential for secure footing in high wind and choppy 

water. To help prevent sailors flying forward, consider a righting line that doubles as a preventer. 

SUREFOOT EVA GRIP KITS 

These lightweight, water-resistant EVA foam 

strips are unmatched in durability. Kits include 

black, waffle-textured, Hydro-Turf EVA foam 

strips, adhesive and brush. H-14/16 kit includes 

four 4"x40" strips; universal kit has six 3"x50" 

strips. 

30-2103 H-14/16 $44.50 

30-2104 Universal $52.00 

HYDRO-TURF 

Hydro-Turf with 2-way, machine-cut grooves (waffle pattern) is 3/16" thick, 

offers the best traction, and is very flexible. Apply with contact cement. Comes 

as 40" x 50" sheet; half (20" x 50") and quarter sheets (10" x 50") are also 

available at a proportional price. 

41-2991BK Black $65.00 

41-2991BL Blue $65.00 

41-2991GR Grey $65.00 

30-2011 Contact Cement– 1/2 Pint $11.95 

30-2020 1" Bristle Brush $1.00 

PADDED HIKING STRAP COVERS 

These durable, 

black, nylon covered 

foam pads attach to 

hiking straps for more 

comfortable hiking out. Full 

length Velcro ® fasteners make 

these covers easy to install and secure. 2" ID x 14". Pair. 

30-3501BK $26.00 

CATAMARAN FOOTSTRAP KIT 

These 6" adjustable straps feature 7mm 

neoprene padding to comfortably accommodate 

bare feet or sailing shoes. Their pre-formed arch 

eliminates collapsing and the exterior hook and 

loop closure system allows for quick and easy 

adjustment. Drilling instructions and self-tapping 

screws are included. Pair. 

01-2015 $38.00 

H-14/16/18 LINE CATCHER 

Prevent the mainsheet from falling 

into the gaps in the center or rear 

lacing by installing an 8" x 72" strip of 

mesh trampoline material between the 

grommets. The existing lacing does not 

need to be undone. Includes tie line. 

30-3530 $29.00 

NON-SKID TAPE 

This self-adhesive 

tape makes a 

nearly permanent 

non-skid 

surface on 

water-slick decks 

or anywhere safe footing 

is a concern. The embossed 

texture is long-lasting and less 

abrasive than other treads. 

30-1352BK Black 2" x 20' roll $16.95 

30-1352 White 2" x 20' roll $16.95 

RE-DEK TRACTION SYSTEM 

A quick and easy way to obtain a permanent, 

professional-quality traction for hull decks, etc. 

Eight ounces of this extra gritty, ultra-clear, 

non-yellowing formula covers approximately 18 

sq. ft. Dries in two to three hours. Gallon size has 

no tray or roller. 

40-2010 Kit with 8 oz. $23.95 

40-2011 Gallon– Formula Only $89.00 

ARRIBA HIKING STICKS 

These are the strongest, simplest and most 

popular sticks on the market. They feature 

a crosshatch textured grip with molded 

rubber end and a locking mechanism that 

has no moving parts. Integral cams lock 

one way and release the other. These black 

sticks are available in 3 fiberglass models 

and one carbon model. Includes yoke 

assembly. Fiberglass sticks are class legal 

for Hobie ® racing, but carbon sticks are not. 

FIBERGLASS FX-03 

For H-16 and 18, Turbo 14, 

Prindle ® , Nacra ® and 8' wide boats 

where the skipper will be trapezing. 

Extends from 50" to 91". 31 oz. 

44-FX03 $129.95 


For all 8-1/2 to 10' wide boats 

where the skipper will be trapezing. 

Extends from 58" to 108". 34 oz. 

44-FX04 $139.95 


For H-17/18 with wings or other 

12' wide cats. Extends from 63" to 

117". 37 oz. 

44-FX06 $149.95 


CARBON CX-06 

Carbon is the choice when you want 

a hiking stick that is even stronger 

and lighter than fiberglass. For H- 

17/18 with wings or other 12' wide 

cats. Extends from 62" to 117". 

25 oz. Not Hobie Class legal. 

44-CX06 $340.00 


REPLACEMENT GRIP 

Factory replacement for Arriba 

sticks. 

44-0001 $5.00 

CORK BALL GRIP KIT 

Replaces the 

stock Arriba, 

Murray or 

Hot Stick end 

grips. Predrilled, lightweight and 

easy to hold. Adhesive included. 

44-0002 $11.75 

Some sailors like to 

“caramel-coat” the cork ball 

with leftover epoxy to make it 

last longer. Order more 2-part 

epoxy as needed. 

00-0002-1 Epoxy Only 

$2.25 

Righting Systems ............................. pg 37 

Tiller Crossbars & Rudder Kits .......32-33 

MURRAY ALUMINUM 

SILVER HIKING STICKS 

These silver-anodized aluminum sticks 

feature the most positive twist-locking 

device available. The shaft is constructed 

of aircraft grade 6061 T-6 aluminum, 

which is lighter in weight and more economical 

than fiberglass, but less durable. 

The yoke assembly is strong and serviceable. 

Not legal for Hobie ® class racing. 

SILVER STICK 40" - 96" 

This 3-piece tiller extends twice and is 

for all 8' wide cats where the skipper 

will be trapezing. Unique 3-piece 

design retracts so it does not extend 

beyond tiller crossbar, making it very 

handy when sailing near docks or 

other boats. Three-piece design requires 

good technique and practice to 

operate properly. (Originally designed 

for Sol Cat 18.) 23 oz. 

01-1331 Stick $70.00 

01-0066 Replacement Plug – 

1-1/8" OD $6.00 


For all 8' wide boats where the 

skipper will not be trapezing. Extends 

once. 17 oz. 

01-1311 Stick $60.00 


1" OD $5.50 


For all 8' wide boats where the 

skipper will be trapezing. Extends 

once. 20 oz. 

01-1321 Stick $65.00 


1" OD $5.50 

YOKE ASSEMBLY 

Replacement parts for all sticks sold by 

Murrays. 

01-0062 Yoke with Spacer $9.00 

01-0061 Contoured Spacer 

Only $.80 

A-C. QUICK RELEASE PINS 

For a quick connection 

of hiking stick 

to tiller crossbar. 

One-hand release; 

just push the 

button, then pull. 

1/4" x 1-1/4". 

A B C 

Detent pin has no button to push and is not 

positive locking. 

A. 18-4D125 Detent Pin $8.00 

B. 18-4R125 Standard Pin $21.00 

C. 18-4M125 Deluxe Pin $27.00 


35

RIGHTING 

A B 

BUCKET UP RIGHTING AID 

Need a little more weight to right your cat? Fill this lightweight 

nylon bag with water and use it as a righting aid or a sea anchor. 

The bag is 13" dia. x 19" tall with a rope edge and comes with 1/4" x 

16' poly line with a brass snap. Use as a righting aid or a sea anchor. 

Theoretical maximum capacity is 88 lbs. 

11-5101 $69.00 

A-B. “BABY BOB” & “MAMA BOB GETAWAY” MAST FLOATS 

The Baby and Mama Bobs were designed to offer the safety and security of mast head flotation with minimized 

drag through the air. Both are fixed in position to the mast head and include the same mounting hardware. 

Recommended usages follow, but both Baby and Mama Bobs will fit the Wave, Getaway, H-14 or H-16 with or 

without CompTip. The Baby Bob is standard on all Waves and is also recommended for the H-14 and H-16. The 

Baby Bob displaces 32 pounds of water, is 20" long x 11" diameter and weighs 2.65 lbs. The larger Mama Bob is 

standard on the Getaway and is recommended for the H-16 with CompTip; minor modifications (drill and tap) 

are necessary to fit H-16 with all-aluminum mast. The Mama Bob displaces 59 pounds of water, is 22" long x 18" 

diameter and weighs 5.85 lbs. Instructions are included for mounting on the recommended boats, with some 

drilling and tapping or light modification necessary for some boats. 

A. 07-30115 Baby Bob $111.00 

B. 07-30119 Mama Bob OVERSIZED FOR AIR SHIPMENT $138.00 

“MAMA BOB UNIVERSAL” 

MAST FLOAT 

Hobie’s new Universal Mama Bob mast 

float system replaces their mast-side 

mounted system (07-30113 Hobie Bob) 

that was previously available. The Mama 

Bob float has been adapted for use as a 

shaft-mounted “universal” mast float. 

This is not a rotating float, but is held in a 

fore-aft position. The new system includes 

hardware similar to the original Hobie 

Bob (30113) system. displaces 59 pounds 

of water, is 22" long x 18" diameter and 

weighs 5.85 lbs. without hardware. 


07-30112 $215.00 

CAT RIGHTING 

BIG BAG SYSTEM 

A must for solo or lightweight crews 

to feel confident being able to right 

a capsized catamaran. Powerful 

enough to right bigger cats without 

loosening shrouds. Easy to install 

with no boat modification required. 

Bag attaches with velcro straps 

under the tramp for easy use and 

storage. Class legal for racing! 

Theoretical maximum capacity of 

the 18" x 32" bag is 250 lbs. The 

included 4:1 block and tackle 

kit does the heavy lifting for 

you! Complete and ready for 

use with blocks, cam cleats and 

1/4" lines. 

01-3280 System $189.00 

01-3282 Bag Only $99.00 

01-3273 Block & Tackle 

System Only 

$99.00 

ANTI-PITCHPOLE HYDROFOILS 

Reduce pitchpoling! This unique safety feature 

is a must for novice sailors. It also allows 

experienced sailors to drive the boat harder and 

faster. Easy on/off with no drilling. For the H-14/16. 

01-3240 $116.50 


“POWER RIGHTING” 

A CATAMARAN BY RICK WHITE 

The following principles are useful, regardless 

of the righting system used. 

With the boat 

on its side, 

let it swing 

around 

until it has 

reached the 

power-righting 

position in 

relation to the 

wind. 

Catamarans have a much-undeserved reputation 

for being tippy and flippy. In fact, because 

of multihulls' inherent stability, it is difficult to 

capsize most catamarans in light to moderate 

air. Wind alone will not do it; it takes a lot of 

weight in the wrong place at the wrong time to 

make one roll over. 

It is easier to capsize in heavy air. On the other 

hand, though, it is also easier to right the boat 

in heavy air. If you use my “power righting” 

technique, it will be easier and faster still. 

RIGHTING LINES 

Before going out sailing, be sure you have 

righting lines installed. 

“POWER RIGHTING” 

You have made a pilot error and your boat is 

going over. It will usually go over slowly and 

seemingly in slow motion. But don't just sit 

there and watch the show. Clamber to what 

is now the bottom hull and bring the righting 

line over the top quickly. As soon as possible, 

hike out on the bottom hull with the righting 

line to keep the mast lying on the water and 

disallowing the boat to turn turtle. 

Once you have stabilized the boat on its side, 

move to the bows. By depressing the bows 

into the water and allowing the sterns to ride 

free of the surface, the wind will swing the 

boat around so that the bows will point into 

the wind. 

Often, if you can get in the hiking position as 

the bows of the boat swing through the eye of 

the wind, you can get the boat righted in just 

a few seconds. Hike hard when the bows are 

directly in the wind; at that time the wind will 

get under the sails, and that, along with your 

hiked-out body weight, will right the boat. The 

beautiful part of power righting is that your 

cat will land on her feet facing directly into the 

wind with the sails luffing. 

Suppose you were a little slow in getting ready 

to right the boat and you find that it has swung 

around so the mast is pointing into the wind. 

What do you do? With the righting line in 

hand, skipper and crew should go to the bows 

and depress them into the water, allowing the 

sterns to come clear. When they blow around 

and the bows face into the wind at a 45° angle, 

start hiking hard. 

Note: The above is an abridged portion of a 

chapter from Catamaran Racing: for the 90's 

written by Rick White and Mary Wells (Item 

#45-0052). 

RIGHTING SYSTEM 

WITH INTERNAL SHOCK CORD 

This kit features internal shock cord that 

snaps back out of the way when not in use. 

Extremely simple to install. Drilling holes 

is optional. 

STRETCH RIGHTING 

Our most popular righting 

line kit. If the bow 

starts to bury, the line is 

readily available to both 

skipper and crew who 

can anchor themselves 

to keep from being 

catapulted forward. This 

View from 

Over Boat 

beautifully simple system features easy-to-grip, 

1/2" hollow braid line with internal shock cord 

that stretches for righting or trapezing and then 

recoils automatically after use. Easy installation 

by securing lines to each transom. 

01-3294 H-14/16/17/18/18SX $60.00 

RIGHTING SYSTEMS 

RIGHTING SYSTEMS WITH PULLEYS 

These three righting systems utilize external pulleys and shock cord. Because the shock cord is 

external, it is easy to notice wear or degradation and is much easier to replace than systems with 

internal shock cord. 

UNIVERSAL RIGHTING 

Simple and effective. Big, 

1/2" diameter, black 

polypropylene righting 

line is light and easy to 

access and grip, even 

when wet. The line 

self-returns under tramp 

after use. No knots to 

pre-tie or untie. The 

View from 

Under Boat 

shock cord and pulleys provided hold line snug 

and are easy to adjust and service. Fits 8' to 8'6" 

wide catamarans. 

01-8292 $58.00 

POWER POLE RIGHTING SYSTEM 

This system employs a righting pole that is attached to the underside of the mainbeams. While 

underway, it rides under the tramp and attaches to the rear beam, safely tucked out of the way. 

Once capsized, you merely release the pole from the rear beam and swing it out perpendicular to 

the boat. 

POWER POLE RIGHTING SYSTEM 

When a capsize occurs, get the bows of the boat into 

the wind to put less load on the boat and righting 

system and make it easier to right. 

To right the boat, simply release the bungee that holds 

the pole out of the water and swing the 

pole out so it is perpendicular to the boat's fore/aft. 

Now, to get more righting leverage, raise the pole to 

around 40° above the straight-out position and then 

slip the stopper knot through the beam loop so it is 

ahead of the beam loop. Now, reach out and grab the 

pole at the end and hang onto it. The boat should come 

up very quickly. 

Once the boat is up, release the stopper knot on the 

righting line from the beam loop and get back on the 

boat. After the boat is underway, the pole will come 

straight back in alignment to bungee back to the rear 

beam. Then off you go! 

The Power Righting System is suitable for 14' to 20' 

cats. Complete with all parts and installation instructions. 

13-4101 Complete System $279.00 

13-4101-1 Complete Less Pole $115.00 

HAWAIIAN RIGHTING 

Doubles as a preventer line. 

Big 1/2" braided righting 

line is suspended by shock 

cord under the trampoline. 

Lines terminate at the 

transom. Behind-theback 

support allows lighter 

crews to combine weight 

BIG CAT RIGHTING 

Kit features extra line 

needed to bring bigger 

cats up from turtle position 

while keeping the deck 

clear for better footing. 

Extra length of 1/2" hollow 

braided line is quickly 

accessed by unhooking 

either or both ends of line with carbine hooks. 

Extra line is neatly suspended just aft of front 

crossbar and is held in place with shock cord. 

Blue water tested and proven! Fits H-20/21, 

Prindle 18.2/19 and Nacra 5.8/6.0. 

01-8293 $72.00 


View from 

Over Boat 

or solo skippers to have a free hand for scooping 

up water (as with the Bucket Up Righting Aid) 

to add leverage. Racing class legal. 

01-3293 H-14/16 $75.00 

01-4293 H-17/18/Prindle ® $85.00 

View from 

Under Boat 

Mast Floats .......................................... pg 36 

Righting Bags ............................................36 

Rope & Shock Cord .................................15 

37

CATAMARAN BATTENS 

SOLID FIBERGLASS BATTENS 

Fiberglass battens are stronger and less expensive than foam battens, but also heavier. To order 

individual replacement battens for any Hobie Cat ® , Prindle or Nacra sail, pick the closest longer 

batten from the appropriate open stock and cut to correct length. Sets are made of proper 

assortment of universal battens and you cut to fit as necessary for the perfect fit. Caps are included; 

replacement and/or upgraded caps are available on page 39. Battens over 59" are oversized and 

additional freight charges may apply. 

A. FIBERGLASS MAIN BATTEN 

SETS FOR HOBIES ® 

46-3011 H-14 6-Batten Main Set $225.00 

46-3020 H-16 Main Set $225.00 

46-3050 H-18 Main Set $299.00 

50-38016001 Wave Set $115.00 

B. FIBERGLASS JIB BATTENS 

FOR HOBIES ® 

46-3030 H-16 Jib Set $85.00 

46-3030-3 H-16 Jib 45" (3rd from bottom; 

cut from each end to 30" for top 

batten) $15.00 

46-3030-1 H-16 Jib 68" (bottom; cut from 

each end to 57" for 2nd from 

bottom) $19.00 

NACRA/PRINDLE/SOL CAT 

FIBERGLASS BATTENS 

Since fiberglass battens specifically for Nacra, 

Prindle and Sol Cats are not available, measure 

for needed battens and purchase battens for 

A B 

C 

C. H-16 SUPER FLEX FIBERGLASS 

JIB BATTEN SET 

If you're having trouble with the jib hanging up 

when tacking your Hobie ® 16, these light and 

limber fiberglass battens are for you. Hang-ups 

are virtually eliminated! Superior jib shape is 

attained in light air when you need it most. 

Increases drive compared to the stock jib battens. 

Not class legal for racing. Set of 4 has vinyl ends. 

07-0122 $33.60 

RACE BATTENS FOR NACRA, PRINDLE, H-20, INTER, TORNADO 

PERFORMANCE CATBATTENS— FOAM BATTENS FROM AUSTRIA 

State of the art batten technology. Constructed with uni- and bi-directional fibers in an epoxy 

resin and molded with extra-high density foam. Catbatten foam battens are as strong and light as 

possible! Catbattens have a one-year manufacturer's guarantee against breakage. 

Battens help to stabilize draft position and depth through varying wind conditions. Battens should 

be lightweight, yet stiff enough to prevent “S” hooking at the leech and to maintain sail shape 

in gusts. Catbattens are standard equipment when supplied with Hobie 17/20, Nacra, Prindle 

and Inter Race Sails in the USA and Europe. The manufacturers work closely with sailmakers to 

optimize batten and sail compatibility. 

Open stock battens are 0.50" wide 

(7mm) and have a standardized 

bend curve and stiffness. To decrease 

stiffness, remove material 

from the edges (width) of the 

batten. When ordering battens, 

measure the batten pocket and 

add 2" for batten adjustment. 

Battens are supplied with one 

adjustment hole and do not 

require batten caps. For easy adjustment and release using batten ties, Perfect Pocket Batten Caps 

(#12-4080 for set of 10) may be installed with epoxy glue, as the Tren Tec cap is a bit too large. 

For a better fit and/or for use with sails utilizing .50"-.75" wide webbing instead of batten ties, 

order RBS caps, #46-0007. The RBS cap fits 12x7mm, but battens are about 13x7mm. To install, 

sand width of batten to fit. 

Reinforced luff tip strengthens and helps prevent breakage. Cut as needed from the leech end to 

preserve reinforced tip. Each. Sizes and specifications are subject to change 

46-5000-50 50" $30.00 

46-5000-75 74.5" $40.00 

46-5000-95 94.5" $50.00 

Hobies ® UNIVERSAL FIBERGLASS BATTENS 

ASK ABOUT OVERSIZED SHIPPING RATES 

A. 1" WIDE 

46-3020-1 107-7/8" to 87-5/16" $43.00 

46-3020-5 82-3/8" to 72-1/16" $32.00 

46-3020-7 90-1/8" to 46-1/8" $41.00 

46-3020-8 42-11/16" to 39-1/16" $22.00 

46-3020-6 67-7/8" to 100-9/16" 

B. 5/8" WIDE 

$42.00 

or choose epoxy battens. 

46-3030-1 69" to 51-3/4" 

46-3030-3 45-3/4" to 24-1/8" 

$19.00 

$15.00 RECREATIONAL, NON-RACE BATTENS FOR NACRA, PRINDLE, SOL 

EPOXY LITE BATTENS 

INDIVIDUAL FIBERGLASS MAIN BATTENS FOR HOBIES By RBS of Hood River, Oregon. Solid 

epoxy battens are almost everything 

that we could ask for in catamaran 

battens— they are durable, 

relatively economical, appropriately 

stiff and tunable, and made in the 

USA. They are heavier than foam, but 

are surprisingly lightweight for solid 

epoxy. The weight of a complete set 

of 9-10 epoxy battens will be only 

1-2 lbs. more than the weight of a set 

of foam battens for the same sail. The battens are tapered to achieve a maximum draft at 25% aft of 

the luff at the head of the sail, progressing to a draft at 45-50% aft of the luff at the foot. Each batten is 

0.60" wide and ranges from 0.20"-0.23" thick before tapering. For leech batten caps, we suggest Tren 

Tec Leech Caps (#12-4080 for a set of 10) for batten tie adjustment or RBS Caps (#46-0005 each) for 

sails with webbing instead of batten tie. Note: It may be necessary to install Tren Tec Caps with glue 

after cutting batten to proper length. 

46-4500-36 .60 x .20 x 36" $18.00 

46-4500-84 .60 x .23 x 84" $36.00 

46-4500-54 

46-4500-66 

.60 x .20 x 54" 

.60 x .20 x 66" 

$24.00 

$28.00 

46-4500-96 

46-4500-108 

.60 x .23 x 96" 

.60 x .23 x 108" 

$40.00 

$48.00 

® 

46-5000-101 101" $55.00 

46-5000-107 108" $60.00 

Battens are numbered starting with #1 at the bottom and counting up. You must trim the battens to the exact needed length. 

Measurements shown are guidelines only, so be sure to measure your sail's batten pockets before cutting! 

See Batten Tuning Tips on this page for additional measuring information. 

ITEM # 

46-3020-1 46-3020-5 46-3020-7 46-3020-8 46-3020-6 46-3030-1 46-3030-3 

PRICE 

$43.00 

$32.00 

$41.00 

$22.00 

$42.00 

$19.00 

$15.00 

Uncut 

Length 

Minimum 

Cut Length 

107-7/8" 

Untapered 

Min. 87-5/16" 

82-3/8" 

Untapered 

Min. 72-1/8" 

90-1/8" 

40" Taper 

Min. 46-1/8" 

42-11/16" 

27" Taper 

Min. 39-1/16" 

100-9/16" 

27" Taper 

Min. 67-7/8" 

69" 

Jib 

Min. 51-3/4" 

45-3/4" 

Jib 

Min. 24-1/8" 

BOAT 

Batten Number & Cut Length Guidelines (Measure batten pocket before cutting!) 

Wave 

H-14 1 

2 

97-7/16" 

93-5/16" 

1 

2 

3 

82-3/8" 

77-7/8" 

66-7/8" 

3 

4 

5 

84-13/16" 

74-1/16" 

60-7/16" 

6 42-11/16" 

4 50" 5 36" 

Getaway 1 92" 

3 88-3/4" 

8 34-1/2" 

2 90-3/4"" 

4 

5 

6 

7 

84-1/4" 

77-3/4" 

69" 

55" 

5 

6 

82-3/8" 

72-1/8" 

7 59-1/8" 8 41" 

H-16 Main 1 107-7/8" 

2 103-7/8" 

3 97-3/8" 

4 90-3/4" 

H-16 Jib 1 68-7/8" 

2 57-7/8" 

H-17 / H-17 

Sport 

H-18 1 101-5/16" 

2 101-5/16" 

3 97-5/16" 

4 93-7/8" 

5 87-5/16" 

H-18SX 1 102-11/16" 

2 104-11/16" 

3 103-3/4" 

H-21SE 1 N/A 

2 N/A 

3 N/A 

3 varies 

4 varies 

6 79-5/16" 

7 68-13/16" 

8 56-5/16" 

1 varies 

2 varies 

3 45-3/4" 

4 30" 

5 varies 6 varies 

9 39-1/16" 10 24-1/8" 

8 46-1/8" 4 100-9/16" 

5 93-7/8" 

6 83-5/16" 

7 67-7/8" 

4 N/A 

5 N/A 

6 N/A 

9 28-1/2" 

7 N/A 

BATTEN TUNING TIPS 

MATERIAL 

Battens can be mixed and matched to obtain optimum sail shape. 

LENGTH 

When measuring sail for battens, add approximately 2" to length of batten pocket to allow for 

compression and batten ties. Only about 1" is needed if using #12-4080 batten caps. Cut foam 

battens from the leech end to preserve the solid luff tip reinforcement. 

STIFFNESS 

Solid Glass: Reduce thickness to increase flexibility as needed. Use a belt sander (with vacuum 

dust control) and grind battens evenly from both sides. 

Foam Sandwich: Reduce width to increase flexibility as needed. 


A B 

A-B. TREN TEC LEECH CAPS 

FOR FOAM BATTENS 

Glue this end cap onto any solid epoxy or foam 

batten. Batten may need to be modified slightly 

to ensure a good fit. Measure your batten and 

select Perfect Pocket cap size accordingly. 

A. 12-4080 Universal 3/4" Main 10/set 

(H-20/P-19/Tiger/Inter/ 

most Nacras) $19.00 

A. 12-4080-1 Universal 3/4" Each $2.25 

B. 12-8003 Universal 1" Main 10/set $19.00 

B. 12-8003-1 Universal 1" Main Each $2.25 

B-C. TREN TEC LEECH CAPS 

FOR FIBERGLASS BATTENS 

No more knots at the trailing edge. Adjust sail 

shape in seconds without tying and untying 

knots. Release tension to prolong sail shape and 

life. Perfect Pocket sets include pre-cut line. 

B. 12-2003 H-14/17 Main 6/set $12.75 

B. 12-3003 H-16 Main 8/set $16.00 

B. 12-3003-1 H-16 Main Each $2.25 

C. 12-3004 H-16 Jib 4/set $8.00 

C. 12-3004-1 H-16 Jib Each $2.25 

B. 12-4003 H-18 Main 10/set $19.00 

B. 12-3003-1 Main for Hobies ® Each 

(all except H-20) $2.25 

B. 12-6003 P-16 Main/Sol 9/set $18.00 

B. 12-7003 P-18 Main 10/set $19.00 

Use Liquid Rope 

Whipping instead of a 

luff batten cap. Just dip the 

end of the batten to form a 

permanent, clear, flexible 

vinyl coating. 4 fl. oz. 

40-8490 $12.95 

BATTEN HINGE SET 

Solution to jib hangup when tacking the Hobie ® 

16. Easy to install, these hinges allow the jib 

battens to pivot on contact with the mast and to 

snap back straight after the tack. Set of 4. 

50-20392001 $18.00 

C 

E 

D 

F 

G 

BATTEN CAPS & SAIL ACCESSORIES 

D-E. TREN TEC LUFF CAPS 

No more battens poking through next to the 

mast. Prevents batten splitting. Align batten to 

the angle of the sail. Glue to the forward end of 

the batten. 

D. 12-2006 H-14 Main 6/set $10.00 

D. 12-3005 H-16 Main 8/set $12.50 

E. 12-3006 H-16 Jib 4/set $6.00 

D. 12-4005 H-18 Main 10/set $13.00 

D. 12-6005 P-16 Main 9/set $12.00 

F-H. HOBIE ® CAPS FOR 

FIBERGLASS BATTENS 

Each. Order batten tie separately; 18" of line per 

batten cap is standard. 

F. 50-11323000 Hobie ® Main Leech $3.20 

G. 50-21333000 Hobie ® Jib Leech $2.40 

H. 50-11322011 Hobie ® Main Luff $1.10 

39-0221 Batten Tie– per foot $.14 

BATTEN TENSIONER 

This great idea from Europe gives precision 

adjustment when tensioning battens. The screw 

thread adjuster allows as fine an adjustment as 

you want. It clips to the sail at the batten tie strip 

grommets and pushes against the end of the 

batten. No batten cap is required. 

07-1528 $10.50 

ANTI-CHAFE TAPE 

Apply to batten pockets to prevent sail abrasion 

from shroud wire. Transparent. It works! 1" x 12." 

07-1500 H-14/17 3 pr $13.00 

07-1490 H-16, 20/P/Sol 5 pr $21.50 

07-1510 H-18/N/P 7 pr $30.00 

I. RBS BATTEN TENSIONERS 

This “clean” 

tensioner is 

inside the batten 

pocket, so it reduces 

the chance 

of snagging the 

spinnaker. Batten 

shipping charges 

may be reduced because these tensioners require 

shorter battens (at least 4" or more). #46-0010 

weighs only .5 oz.; #46-0015 is 1 oz.; #46-0019 

is 1-1/2 oz. Each. 

46-0010 10 x 5mm– H-16 Jib Batten $9.00 

46-0015 15 x 7.6mm– Epoxy Lite or Hobie 

Main* Batten $9.00 

46-0017 19 x 6.7mm– Epoxy Batten $9.50 

46-0019 19 x 8.9mm– Foam or Hobie Main* 

Batten $10.00 

*Batten modification necessary to fit in tensioner 

J-K. POCKET PROTECTOR 

Tough nylon. Kits have one pair protectors with 

indentations for included brass nuts and screws. 

Fit main battens up to 2" wide. 

J. 01-1001 Main $8.00 

K. 01-1002 Jib $4.00 

19-2010 Brass Hex Nut $.15 

19-1510 Brass Screw $.14 

L. SPREADER COVERS 

These vinyl spreader bar end covers are real 

sail-savers! The black, smooth, resilient covers 

protect the jib luff from wear and tear from cotter 

keys and sharp edges. 

L. 07-3262 Hobie – Pair $9.95 

56-9862 Nacra/Prindle – Each $6.00 

M-O. MAIN HEADBOARD 

& TACK/CLEW KITS 

Kits include one pair of anodized aluminum 

plates with rivets. Replacement rivets are available 

separately and can be set with a hammer. 

Use #19-5006 rivets for 01-1014 or 01-1012 

kits; use #19-5005 rivets for 01-1016 kit. 

M. 01-1014 Headboard Kit $18.50 

N. 01-1012 5-Hole Clew Kit (H-16 Jib) 

$24.00 

O. 01-1016 Tack/Clew Kit $15.00 

19-5005 Rivet A 4-6 $.12 

19-5006 Rivet A 6-6 $.18 

H-16/SOL CAT 

JIB SAIL HANK 

Replacement part. 

50-22090001 $3.00 

LEECH LINE CLEAT 

Jib halyard tensioning cleat for zippered luff jibs. 

27-0212 $9.00 


H 

I 

J 

L 

K 

M 

N 

SAIL FEEDER 

Helps the sail feed evenly into the mast track 

without catching and/or tearing the sail. Best 

for Hobies ® . 

50-80100501 $16.00 

Batten Tie ............................................ pg 15 

Rigging Tape .............................................53 

Sail Maintenance .....................................17 

Tell-Tales & Wind Vanes ........................19 

O 

39

SAILS 

Aftermarket sails are available in a wide range of colors, 

including fluorescent choices. Colors may vary from photo. 

REPLACEMENT SAILS 

H-14, 16 & 18 SAILS 

Same patterns. . . more options. . . better prices! Colors in 

5.0-oz. Dacron include: white (4.0-oz. where indicated 

in chart), fluorescent lime, fluorescent yellow, hot pink, 

red, orange, emerald green, dark blue and purple. Many 

construction details are better than stock! Most sails are made 

to order. Replace your favorite color(s) or design a new color 

scheme! Battens, viewing and tell-tale windows, logos and 

sail numbers are available options. Not class legal for racing. 

(Delivery: 14-28 days.) 

H-WAVE & H-17/18 DACRON SAILS 

Heavy duty, horizontal cut, Dacron sails will outlast Mylar 

originals! The overall size and shape is nearly the same as 

stock. Wave sail is 5.0 oz. and is available in white or color(s). 

PRINDLE 15, 16, 18, SOL CAT & ESCAPE SAILS 

Horizontal cut Dacron sails are listed as 4.0-oz. white. Color(s) 

and 5 oz. Dacron are available. Call for options. 

SAIL OPTIONS 

30-5001 Viewing Window– Each $60.00 

30-5002 Tell-Tale Window– Each $30.00 

50-12430011 HC Sail Logos Black (pair) $18.50 

See page 17 for sail numbers. 

SQUARE HEAD MAIN SAILS 

Too good to be true? Not really… having a square head 

sail vs. a pin head adds noticeable power in lighter winds 

and when sailing off-the-wind. Then, through the use of a 

powerful downhaul to help flatten the sail and let the top 

twist-off, you can still maintain control in higher winds. Most 

of the 5-oz. replacement sails can be built with a square head 

for an additional charge. Please contact Murrays for a quote 

or to order. 

OTHER REPLACEMENT SAILS 

Any sail can be duplicated. We have patterns for Prindle, 

Nacra, Sol, Freestyle, etc. Your sail can be used as a pattern if 

no pattern is available. Call for information. 

Colored sails in 4.0-oz. cloth for H-16/H-18 are available by 

special order. 

Battens ................................................ pg 38 

Roller Furling Hardware ........................41 

Sail Accessories ........................................39 

Sail Numbers & Maintenance ..............17 

Tell-Tales .....................................................19 

SAIL SELECTION CHART 

AFTERMARKET SAILS 

FACTORY SAILS 

4.0 oz. 5.0 oz. 5.0 oz. Shown are white sails without battens; 

Boat White White Color* please call for color options and prices. 

Wave Main 30-6003 $650.00 30-6003 $730.00 50-38991000 $812.00 

Wave Jib Call $175.00 Call $225.00 50-38992010 $223.00 

Getaway Main 30-6005 $725.00 

Getaway Jib 30-6005-1 $225.00 50-37992071 $327.00 

Tiger Sq Top Main Call $1834.00 

Tiger Jib 50-F18030400 $710.00 

H-14 Main 30-6010 $475.00 30-6013 $600.00 30-6012 $725.00 50-10990010 $806.00 

H-14 RF Jib 30-5012 $275.00 30-5012 $300.00 50-10992511 $380.00 

H-16 Main 30-6020 $480.00 30-6028 $650.00 30-6022 $800.00 50-20991011 $889.00 

H-16 Std Jib 30-6020-1 $240.00 30-6028-1 $300.00 30-6025 $355.00 50-20992010 $416.00 

H-16 RF Jib 30-5021 $350.00 30-5021 $360.00 

H-17 Main (Radial) 30-5112** $975.00 30-6052 $1125.00 50-52991000 $1232.00 

H-17 Sport Jib 30-5112-1 $325.00 30-5112-1 $375.00 50-52992006 $452.00 

H-17 Super Jib 30-6030-1 $300.00 30-6038-1 $350.00 

H-18 Main 30-6030 $550.00 30-6038 $750.00 30-6032 $900.00 50-60991011 $972.00 

H-18 Jib 30-6030-1 $300.00 30-6038-1 $350.00 30-6035 $410.00 50-60992011 $484.00 

H-18 SX Main (Radial) 30-6039 $1150.00 50-68991100 $1477.00 

H-18 SX Jib (Horizontal) 30-6039-1 $425.00 50-68992100 $707.00 

H-20 Main 50-40991000 $1638.00 

H-20 Jib 50-40992010 $710.00 

H-21SE Main (Radial) 30-6041 $1275.00 

H-21SE Jib 30-6044 $550.00 

Inter 20 Main 56-8620 $1755.00 

Inter 20 Jib 56-8621 $665.00 

P-16 Main 30-8016 $480.00 30-8016 $650.00 Call 

P-16 Jib 30-8016-1 $240.00 30-8016-1 $300.00 Call 

P-18 Main 30-8018 $550.00 30-8018 $750.00 

P-18 Jib 30-8018-1 $300.00 30-8018-1 $350.00 

P-Escape Main 30-8017 $620.00 30-8017 $730.00 Call 

P-Escape Jib 30-8017-1 $320.00 30-8017-1 $375.00 Call 

Nacra 5.2 Main Call $480.00 Call $650.00 

Nacra 5.2 Jib Call $240.00 Call $300.00 

Sol Cat 18 Main 30-6111 $735.00 30-6111 $1045.00 

Sol Cat 18 Jib 30-6112 $420.00 30-6112 $550.00 

Price shown is base price plus options. Battens are not included except #30-6041 H21SE. See page 38 to order battens. 

* Please specify color when ordering. Multi-color may be an additional charge. 

** Please specify H-17SE (boom) or H-17 Sport (boomlet). 

H-17 SUPER JIBS 

Easy to use, easy to 

control performance 

boosters. In very 

light breezes, a H-17 

without a jib sits 

like a statue. The 

overlapping super 

jib grabs the lightest 

zephyr and directs 

it behind the main 

to propel the boat. 

Essential in up 

to 4-5 knots… 

“Fun!” at 6-10 

knots. . .“Furl it!” over 12 knots. Off the wind, 

reach up a bit and blast off; you can hold it 

to about 20. Order roller furling and bridle 

crossbar hardware kits separately. 

30-6030-1 4.0 oz. Horizontal Cut Jib 

White H-17/18 $300.00 

30-6035 5.0 oz. Horizontal Cut Jib 

Color H-17/18 $410.00 

30-6038-1 5.0 oz. Horizontal Cut Jib 

White H-17/18 $350.00 

30-5112-1 5.0 oz. Sport Jib 

White H-17 $325.00 

NOTES ABOUT AFTERMARKET SAILS 

• Prices are for sails only. Prices do not include battens, class insignias, sail numbers, 

tell-tale windows or viewing windows in the main, except as noted. 

• Horizontal cut, Dacron sails in 4.0-5.0 oz. are cut to factory specifications. 

• Multicolor sails are limited to one sail color in each panel. 

H-14/16 ROLLER 

FURLING JIBS 

Add safety, 

convenience and 

performance. Furl 

your jib while 

beached, or to 

reduce sail area. 

5.0 oz. Dacron 

sailcloth in 

your choice 

of solid 

colors. 

Viewing 

window is included. Order hardware kit 

separately. 

See chart for item numbers and prices. 

SAILS FOR SUNFISH ® 

High quality sails at an economical 

price! These 4.0 oz. Dacron 

sails from Aerotech feature 

oversized stainless steel 

grommets, glued 

and triple-throw 

stitched seams. 

Choose your 

multi-color 

3-ply luff 

panels 

from a selection of colors. Measure 13' at foot 

and 13' at luff. Not authorized by the Sunfish 

class for racing. 

30-7002 Custom Colors $265.00 


#30-5061 is shown; 

A other kits may vary. 

Please see descriptions below. 

A. ROLLER FURLING 

JIB HARDWARE KITS 

Furl your jib while beached to save your sail 

from flapping or for when flying a spinnaker. 

Specify boat model when ordering (Example: 

P-18.2 or N-5.8). 

A. Prindle® kits (shown in photo) include: 

Harken ® roller furling drum, upper forestay 

with Ronstan ® swivel and 2" stainless steel 

ring, Harken ® 279 cleat with eyestrap for front 

crossbar, fasteners and instructions. 

30-5061 Prindle: Specify Model $325.00 

Nacra® kit includes: Harken ® roller furling 

drum with 10-hole adjuster and luff tension 

cleat attached, upper and lower forestay with 

Ronstan ® swivel and Hobie ® halyard block, 

halyard wire with block and shackle attached, 

halyard line, Harken ® Micro cleat with eye strap 

for front crossbar, fasteners and instructions. 

30-5051 Nacra: Specify Model $425.00 

H-20 Hobie ® -Style kit utilizes the Hobie ® 

halyard system (as on the H-18). It includes: 

Hobie ® roller furling drum with adjuster, 

Hobie-style jib halyard system, upper and 

lower forestay with Ronstan ® swivel, Harken ® 

micro cleat with eyestrap for front crossbar, 

fasteners and instructions. 

30-5081 H-20 Hobie-Style $495.00 

H-16 kit includes: Harken ® roller furling drum, 

pigtail, Ronstan ® swivel and instructions. 

30-5020 H-16 $315.00 

H-14 kit includes: 1/8" coated shrouds, complete 

trapeze system (wires with adjustments), 

jibsheets and cleat assemblies, Harken ® Micro 

cleat with eye strap for front crossbar, pigtail, 

Ronstan ® swivel and instructions. A dolphin 

striker should be added if not already on the 

boat (see next column). 

30-5015 H-14 $725.00 

B-C. ROLLER FURLING HARDWARE 

Harken's high load drum has maximum working load of 950 lbs., a height of 2-3/4", 

and a maximum drum diameter of 2-3/4". 

B. 28-0165 Harken High-Load Drum $210.00 

C. 50-61900000 Hobie ® Furler Assembly $252.00 

HOBIE ® FURLER TUNE-UP KIT 

Includes bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and 

housing. 

50-61900900 $42.00 

D-F. ROLLER FURLING SWIVELS 

The simplest, strongest and least expensive roller furling swivels for roller furling jibs. 

Harken swivel has a safe working load of 950 lbs., weighs 2.6 oz. and has a distance 

between pins of 2-1/2". Ronstan swivel eye/eye weighs 2.3 oz., 1-15/16" between 

center of holes, and has a 2200 lb. breaking load; eye-jaw weighs 2.1 oz., pin-tocenter-of-hole 

measurement is 1-7/8", with a breaking load of 3740 lb. 

D. 28-0164 Harken Hi-Load Swivel $135.00 

E. 21-0078 Ronstan Swivel Eye & Eye $63.35 

F. 21-078B Ronstan Swivel Eye & Jaw $69.75 

H-14 DOLPHIN STRIKER 

Supports the 

mast and 

maintains front crossbar integrity. Needed for 

trapeze, heavy air sailing or jib kits. Racing class 

legal. Includes black anodized post, wire, two eye 

bolts with nuts, rivets and instructions. 

01-2083 Kit $80.00 

01-0106 Eye Bolt Only $3.00 

SUPER H-17 ROLLER FURLING JIB 

HARDWARE KIT 

Give your 17 more horsepower! Improves light 

wind performance to weather and under all 

conditions off the wind. Hardware kit includes 

bridle crossbar with Harken ® roller furling drum 

and upper swivel, Harken ® jib cleats mounted on 

18" jib track, sheets, halyards, necessary hardware 

and instructions. 


30-5104 Hardware Kit $1095.00 

01-1350 H-17 Crossbar Assembly $275.00 

Line ....................................................... pg 15 

Sails ...............................................................40 

ROLLER FURLING HARDWARE 

G. UNIVERSAL SPINNAKER POLE 

Simplify spinnaker tack control. This pole moves 

tack forward for better air flow between the main 

and spinnaker. The 2" pole is maximum class 

legal length for H-21 (144"), but ships in two 

pieces for convenience and economy. By Hobie ® . 


50-40998000 297.00 

SMALL MAST TANG 

Stainless steel tang with 

four mounting holes is used 

for mounting spinnakers. 

56-6607 $14.00 


D 

B 

C 

E F 

SPINNAKER HARDWARE 

Photo: Hobie Cat 

G 

MID-POLE SNUFFER SYSTEM 

A snuffer funnels the spinnaker into the sock to 

facilitate launching and retrieval, even while sailing 

a triangular course. Keeps the tramp clean. 

SNUFFER HOOP 

Fiberglass ring attaches to spinnaker pole to 

guide the spinnaker in and out of the sock. 

56-9710 $180.00 

SNUFFER SOCK 

Holds sail when not in use. 

56-9711 $188.00 

SPINNAKER POLE 

1.5" OD aluminum pole is 12 feet long. Cut to fit. 

Delivery of pole is by DHL or other arrangement. 

Attach pole to boat with cap and pin. Order a 

second pin for a more finished appearance. 

56-9622 Pole $230.00 

56-9625 End Cap (1-5/16" OD) $10.00 

56-9626 Main Beam Pin $12.00 


41

PORTS & ACCESSORIES 

CONTOURED 4" & 5" PORTS 

Each screw-in port includes one deck ring and one lid. The deck ring has a contoured surface for leak-free installation on a curved 

deck. The kit includes two ports, nylon fasteners, silicone sealant and instructions. Cat Bags are not included. By Viking Marine. 

For H-14, N-5.0, N-5.2, N-5.8 

01-1161WH 4" Port only White $9.75 

01-1161BK 4" Port only Black $9.75 

01-1164WH 4" 2-Port Kit White $37.00 

01-1164BK 4" 2-Port Kit Black $37.00 

B 

A-B. CAT BAGS 

Sturdy nylon bags with plastic collars hang inside 

Viking access ports on a molded shoulder. 4" 

port bags are 9" deep. 5" and 6" bags are 12" 

deep. Fat Cat bags have the same depth, but 12" 

maximum diameter for greater storage capacity. 

A. 01-1169 4" Cat $16.50 

B. 01-1170 4" Fat Cat $19.75 

01-1178 5" Cat $18.50 

01-1179 5" Fat Cat $25.00 

For H-18 Viking Screw-In Ports 

(#01-4210) 

01-4212 6" Cat Bag $20.00 

01-4213 6" Fat Cat Bag $28.00 

Folding Anchor ................................. pg 18 

Telescopic Paddle ................................. 18 

A 

For H-16 

01-1171WH 5" Port only White $11.50 

01-1171BK 5" Port only Black $11.50 

01-1174WH 5" 2-Port Kit White $40.00 

01-1174BK 5" 2-Port Kit Black $40.00 

Sorry, lids are not available separately. 

FLAT DECK 4" & 5" PORTS 

Each screw-in port includes one deck ring and 

one lid. The deck ring is designed to install on a 

flat surface. A lip accommodates Cat Bags (not 

included). By Viking Marine. 

01-1191WH 4" Port White $9.50 

01-1195WH 5" Port White $11.25 

SCREW-IN 6" PORTS 

Standard on Hobie ® 18 and new Prindle cats; 

upgrade for older Prindles. Install on any flat 

deck, including kayaks, where there is 8-1/2" of 

flat surface available. The 6" port by Viking has a 

lip for a Cat Bag. Each. 

01-4210 White $14.00 

01-4210BK Black $14.00 

REPLACEMENT “O” RINGS FOR 

VIKING PORTS 

01-1161OR For 4" Port $1.00 

01-1171OR For 5" Port $1.50 

01-4210OR For 6" Port $1.50 

01-1185OR For 8" Port $2.95 

PORT INSTALLATION 

Apply silicone generously to ring and deck. Do 

not overtighten fasteners as this may deform ring. 

Fastener kits include all needed fasteners for two 

ports plus Silicone sealant. 

01-1159 Fastener Kit White $17.95 

01-1160 Fastener Kit Black $17.95 

40-8019 Clear Silicone 3 oz $14.99 

19-1520BK Nylon Screw 

#8-32x1-1/4" Black 

19-1520WH Nylon Screw 

$.28 

#8-32x1-1/4" White $.28 

19-4006WH Nylon Washer #8 White $.06 

19-2020WH Nylon Hex Nut #8-32 White $.20 

19-1517 Flat Head Machine Screw 8x1" 

Stainless Steel $.30 

19-2016 Hex Nut 8x32 Stainless Steel $.16 

19-4011 Washer Stainless Steel $.20 

When installing port, apply silicone 

#40-8019 where rope goes through lid to 

reduce leakage. 

WHY INSTALL DECK PORTS? 

Deck ports provide ventilation, access to storage space and entry for 

inspection or repair. They are a good way to dry out hulls so that your 

boat is not carrying around excess weight. Black color has superior UV 

resistance. 

PORT DIMENSIONS 

4" contour 4" flat 5" contour 5" flat 6" screw-in 

A 4-15/32" 4-15/32" 5-15/32" 5-15/32" 6-7/16" 

B 4-1/8" 4-1/8" 5-1/8" 5-1/8" 6-1/8" 

C 4-1/2" 4-1/2" 5-1/2" 5-1/2" 6-1/2" 

D 7/8" 7/8" 7/8" 7/8" 1-1/4" 

E 5-3/4" 5-3/4" 6-3/4" 6-3/4" 8-3/16" 

F 3/32" 1/8" 

G 1/4" 3/16" 3/16" 3/16" 1/4" 

H 3-3/4" 3-3/4" 4-5/8" 4-5/8" 5-9/16" 

WHICH PORT FITS WHICH BOAT? 

01-1161WH or BK 01-1171WH or BK 01-1191WH 01-1195WH 01-4210 

Contoured 4" Contoured 5" Flat 4" Flat 5" Screw-In 6" 

H-14 H-16 Tiger* H-18 

Nacra aft & forward** Wave Nacra forward** H-20 

Inters Prindles 

*Fill and redrill fastener holes **Forward is on-stock; choose flat or contoured depending on location 

TWIST-LOCK DECK PLATES 

Feature a twist lock handle which allows easy 

removal without pry tools. The polypropylene 

deckplates are acetone resistant. Each. 

01-1184WH 6" $26.00 

01-1185WH 8" $36.00 


VIDEO: CATAMARAN SAILING 

Two highly professional, expertly edited interactive DVDs present a complete 

guide to sailing beach catamarans, from launching to first tacks to regatta. 

Whether you are a beginner or seasoned regatta competitor, you will find 

these 5 hours of film to be full of information and inspiration. The film 

was shot using a system capable of simultaneously recording several 

cameras placed on the catamarans and chase boats and are used 

to illustrate the techniques presented by Mitch Booth and Herbert 

Dercksen (Tornado), Darren Bundock and Glenn Ashby (F18), Glenn 

Ashby (A Class) and Emmanuel Boulogne (F18). The interactive interface makes 

it easy to move from one sequence to another. The DVDs can be used on newer DVD players or personal 

computers and they are PC/Mac compatible. 

45-0012 DVD $59.95 

VIDEO: CATAMARAN SAILING– A STEP BY STEP GUIDE 

This video is Murray's choice for beginners. It is easy to understand and provides 

a boat load of information. With helpful 3-D computer graphics, sailing 

champion Brian Heffernan covers trailering, rigging, trapezing, capsizing, points 

of sail, parts of the boat, and sailing in light and moderate breezes. 45 minutes. 

45-2041 VHS $19.00 CLOSEOUT 

45-2043 DVD $30.00 

RICK WHITE'S VIDEO SAILING SEMINARS 

Improve your catamaran sailing and racing skills! Rick White's Video Sailing 

Seminars cover all parts of sailing and are great learning tools for the beginner 

and novice sailor through advanced racer. Each video is 30 to 40 minutes in 

length and all are included on one DVD. Seminars include: 

• Total Boat Handling— Gain complete control of your boat… stop on a 

dime, accelerate quickly, tack and jibe fast make the boat do what YOU 

want IT to do, not what It wants to do. 

• Upwind Sailing & the Complete Catamaran Rolltack— Learn everything about getting to the upwind 

mark quickly and also learn to do very fast roll tacks. Instead of 25 seconds to tack, you will tack in mere 

seconds. 

• Great Starts and Finishes— Learn how to have great starts every time. Learn the importance of the 

finish and how many boats you can pass there. 

• Great Mark Roundings— Learn to pass many, many boats at each and every mark! You will always 

come away in clear air and in good tactical position! 

• Downwind Sailing— Learn all the top secrets of downwind speed, plus all about spinnakers, hooters 

& snuffers! 

45-2029 $99.00 

VIDEO: CATAMARAN RACING 

Whether you're a pro looking for a few pointers to increase your success 

on the race course or a beginner wondering how to get involved in racing, 

Catamaran Racing has the answers. Top racers from around the world share 

their experiences and offer valuable insight into the fast and exciting sport of 

catamaran racing. The topics include: Your First Regatta, Course Layout, Starting 

Technique, Rules of the Road, Mark Rounding, Launching in Surf, and Racing 

Strategies. 40 minutes. 

45-2042 VHS $19.00 CLOSEOUT 

45-2044 DVD $30.00 

VIDEO: SHARING THE WIND & A MOMENT'S GLORY 

Two films are combined on a single DVD for more action and entertainment. 

Filmed in Hawaii and California, Sharing the Wind captures the intensity of 

championship Hobie ® catamaran racing and the magic of recreational sailing, 

hull-flying in conditions that demand perfection, and a stunning sequence 

of crews performing synchronized, ballet-like maneuvers. A Moment’s 

Glory is an action-packed film covering the World Catamaran Championships 

of the 16-foot Hobie Cat that were sailed in the warm trade winds 

off Waikiki Beach. Eighty-four of the best cat sailors from nineteen 

countries gathered in Hawaii to compete for this coveted World Title. 

The two movies run 51 minutes total. 

45-2040 DVD $30.00 

Sorry, videos may not be returned unless defective. All VHS videos are NTSC format 

and are not compatible with PAL or SECAM. 

CAT & DINGHY VIDEOS & BOOKS 

CATAMARAN SAILING FROM START TO FINISH 

This book is Murray's choice for the beginner and semi-experienced 

catamaran sailor. It offers a complete course in catamaran sailing for 

anyone who wants to become more skilled in the arts of tuning, handling 

and racing cats. In addition to sections on buying a cat, learning 

the basics, heavy-weather sailing, mastering the fine points, racing 

tactics, and surfing, it includes a new chapter on high-performance 

sails, covering how to use spinnakers, reachers, screechers, and 

fathead mainsails. By Phil Berman. 219 pages. Revised edition ©1999. 

Paperback. 

45-0135 Book $24.95 

THE CATAMARAN TUNING GUIDE 

This book starts at the basics and works its way to high-tech— a good 

choice for beginner, novice, journeyman or hotdog. By Michael Fragale; 

edited by Rick White and Mary Wells. 128 pages. ©1999. 

45-0054 Book $30.00 

CATAMARAN RACING: FOR THE 90'S 

This is the ultimate catamaran sailing book. With nearly 50 diagrams, 

the founders of Rick White's Sailing Seminars teach cutting-edge 

techniques for this new generation, including the “Wild Thing,” (a 

hot, faster way to sail downwind) and the “Catamaran Roll-Tack,” (a 

trick to get your tacks down to only 5 seconds). Plus a great lineup 

of chapters contributed by famous world-class sailors. 352 pages. 

©1992. Paperback. 

45-0052 Book $30.00 

SAILING DRILLS: HOW TO SAIL BETTER, FASTER, 

SMARTER, SAFER 

Rick White and Mary Wells of Rick White's Sailing Seminars have 

compiled a book of drills that dissect sailing and racing. These intensified 

drills can eliminate years of improper practice time, years of trial and error, 

years of following others around the course, and years of disappointment! 

160 pages. ©1995. Paperback. 

45-0053 Book $30.00 

SAILOR'S START-UP: A BEGINNERS GUIDE TO SAILING 

A light, straightforward introduction to the sport of small boat sailing. 

Stuffed with over 100 photos, the text covers the basics of gear, conditions, 

technique, safety and etiquette for monohull and catamaran sailing. 

Guaranteed to inform and motivate. By Doug Werner. 140 pages. 

©1994. 

45-0110 Book $9.95 

OWNERS' MANUALS 

Factory manuals are invaluable. 

50-13450000 H-14 Assembly $5.25 

50-23450000 H-16 Assembly $5.25 

50-50450001 H-17 Assembly $5.25 

50-52450011 H-17 Sport Assembly $5.25 

50-63450000 H-18 Assembly $5.25 

50-43450001 H-20 Assembly $5.25 

50-38450000 Hobie ® Wave Assembly $5.25 

56-9558 Nacra Assembly $6.00 

56-9050 P-15/16/18 Owner's $6.00 

56-9058 P-18.2/19 Owner's $6.00 

ILLUSTRATED PARTS LISTS 

Learn the real name of that thingamajig and make ordering parts easier. An excellent resource for sailors 

doing maintenance and repairs. 

50-87162810 H-14/16 Parts $1.00 

50-87173000 H-17 Parts $1.00 

50-87166810 H-18 Parts $1.00 

50-87167020 H-20 Parts $1.00 

50-87167021 H-21 Parts $1.00 

56-0300 Nacra Parts $1.00 

56-0200 Prindle Parts $1.00 

56-0400 Inter Parts $1.00 


43

MURRAYS CATAMARAN HARNESSES 

MURRAY RACE HALF & FULL HARNESSES 

• Battens provide significant back support! 

• Contoured and adjustable fit: Our most comfortable harnesses. 

• Padded with 3/8" closed-cell foam: Does not retain water. 

• 500 denier Cordura outer layer is more durable than pack cloth. 

• 1000 denier Cordura seat is super durable at point of most wear. 

• Cordura seat is padded with 

1/4" neoprene. 

• Non-skid patches reduce 

slipping on deck and tramp. 

• Padded leg straps offer support 

and comfort advantages. 

• Race Harness is compatible 

with all trapeze buckles sold by Murrays. 

• Weight of Race Full size L: 1 lb. 13 oz. (2 lb. 5 oz. with Murray 10" 

spreader) 

• Color: blue. 

• Order trapeze buckle separately. 

RACE HALF HARNESS 

Order spreader separately. 

$105.00 

30-0243BL Medium Blue 

30-0244BL Large Blue 

30-0245BL X-Large Blue 

Skamokawa Regatta 2006 Photo: Alan Aplin 

RACE FULL HARNESS 


$140.00 

30-0342BL Small Blue 

30-0343BL Medium Blue 

30-0344BL Large Blue 

30-0345BL X-Large Blue 

TRAPEZE COMFORT & SAFETY 

• Wear a wetsuit under your trapeze 

harness to protect yourself from abrasion 

and to help hold the harness in its proper 

position. 

• Be sure side-release buckles are completely 

closed before hiking out! 

• Check trapeze control lines for proper 

height (dogbone should pull down to 

within 9" of sidebar), for wear (replace 

frayed or sun-damaged lines), and be 

sure that knots are securely tied. 

• Wear non-slip footwear and/or prepare 

hulls or sidebars with a non-slip surface. 

Gul Harnesses .................................... pg 47 

Spreaders & Buckles ...............................46 

Trapeze Adjustment Kits ......................49 

Wetsuits ................................................10-11 

Murrays harnesses do not come with trapeze 

buckles. See page 46 for a complete selection. 

HARNESS FITTING 

HINTS 

The primary determinant 

of fit is waist (or hip) size. 

You need to be able to wrap 

the harness “wings” around 

your sides far enough that 

they protect you from the 

MURRAY HARNESS 

WAIST SIZES 

Small 22" - 30" 

Medium 28" - 34" 

Large 32" - 38" 

X-Large * 36" - 44" 

*Race Harness only 

buckle straps, but not too far. If you start with the buckle at 

the height of your belly button and proceed to secure the leg 

loops and then the buckle hold-down straps, the harness will 

be in its proper position. Be sure that the buckle does not move 

north when the shoulder straps are tightened. A wetsuit (short 

or long john) is very helpful to prevent the harness from sliding 

out of position. Excess strap can be cut and/or laced neatly back 

through the buckle . 


HARNESS CONSTRUCTION DETAILS 

All Murrays harnesses are made in Santa Barbara, California. The materials are selected for their 

function and durability. All harnesses are padded with 3/8" closed-cell foam and are lined with 

8-oz. nylon pack cloth. Extra-long polyethylene straps facilitate fitting skippers and crews of many 

sizes and shapes. The outside shell materials include 8-oz. pack cloth or heavier-duty 500 or 1000 

denier Cordura ® . 

MURRAY FREEDOM HALF HARNESSES 

• Contoured and adjustable to fit your shape: More comfortable than the Classic harness for longer 

periods of trapezing and for heavier sailors. 


• 500 denier Cordura outer layer is more durable than pack cloth. 

• Padded leg straps offer support and comfort advantages. 

• Non-skid patches reduce slipping on deck and tramp. 

• Freedom Harness is compatible with all trapeze buckles sold by Murrays. 



$95.00 

30-0332BL Small 

30-0333BL Medium 

30-0334BL Large 

Murrays harnesses do not come with trapeze 

buckles. See page 46 for a complete selection. 

MURRAYS CATAMARAN HARNESSES 

MURRAY HARNESS 

WAIST SIZES 

Small 22" - 30" 

Medium 28" - 34" 

Large 32" - 38" 

X-Large * 36" - 44" 

*Race Harness only 

MURRAY CLASSIC HALF HARNESS 

• Contoured and adjustable to fit your shape: Good comfort for recreational (shorter) sailing. 


• Fits wide size range and is quick and easy to adjust: Ideal for sharing! 

• 8-oz. nylon pack cloth is durable and easy-care. 

• Adjustable diaper-style harness is compatible with all trapeze buckles sold by Murrays. 



$69.00 

30-0212BL Youth/Small 

30-0213BL Medium 

30-0214BL Large 

30-0212 Replacement Dowel $.50 


CHOOSING A HARNESS 

For Recreation 

The basics: Murrays half harnesses are well made, easy to adjust and fit a wide range of sizes. 

Beyond the basics: Less is more; the simpler, the better for recreational sailing. 

• Classic half harness provides a nice, padded, tailored fit with a “beaver tail.” It is simple and 

economical. 

• Freedom half harness uses leg loops instead of “beaver tail” which adds two more straps, but is 

more comfortable for longer sailing sessions “on the wire.” 

• Race half harness provides outstanding comfort, durability and support. It is used by many 

racing skippers who do not feel the need for the shoulder support of a full harness, even for a full 

weekend of racing. 

For Distance Sailing and Racing 

More support equals more comfort which requires more adjustments. Most adjustments on all 

Murrays harnesses have a “memory,” so once the harness is adjusted, it stays adjusted from one day 

to the next. 

• The Murrays Race FULL harness has been proven again and again by weekend racers and by long 

distance racers. The Race harnesses are built to last and the back support (batten system) is the 

most emulated feature in top end trapeze harnesses today. (If racing started on the beach and 

included dressing, all harnesses would use the Murray SR buckle and strap system because it is 

SO much faster and easier to put on than the others!) 

Catamaran vs. Dinghy Harnesses 

Catamaran harnesses by Murrays are generally more user friendly; they are faster and easier to put 

on and adjust, and many adjustments have a “memory.” To avoid loose strap ends, simply trim the 

adjustment straps and pass the loose ends back through the buckles where they will be contained 

and restrained. 

Dinghy harnesses by Gul (and others) may appear to be simpler. This “simplicity” is an attempt to 

avoid “snagging” rigging while maneuvering in the close quarters and complex rigging environments 

of the new high performance dinghies. The cost of simplicity is extra time and effort to 

properly adjust the harness. 

Safety Issues 

• Trapeze hook can snag on rigging or anything else: This IS serious, but avoidable. 

Solution: See Key Hole and Quick Release Trapeze Hook Systems on page 46. 

• “Slippery when wet” connection between harness seat and cat deck (fiberglass hull or poly mesh 

trampoline). 

Solution: Apply non-skid tape or EVA foam pads to slippery decks or side bars. 

Solution: Murray Freedom and Race harnesses have “non-skid” patches on the seat areas that 

really work! 

• Quick release adjustment buckles pre-release: Not much of an issue, but it has happened. 

Solution: Double check the buckles to see that they are properly closed before you hike out! 

• Strap adjustment buckles “snag” on rigging: Murphy knows that it can happen! 

Solution: Wear a close fitting Lycra jersey over everything! (see page 10) 

Solution: Gul and Da Kine harnesses have neoprene covers over most strap adjustment buckles. 


45

SPREADERS 

STAINLESS SPREADER BAR 

Strongest, most comfortable trapeze hook system! This 10" spreader 

is recommended for all Murray harnesses. Wide hook system greatly 

enhances comfort by reducing hip squeeze. Shoulder straps move 

freely with your movements through smooth stainless attachment 

loops. No trapeze ring retaining mechanism to fail or foul. Stainless 

steel with black powder coating. Hook is welded at two points for 

superior strength. 8 oz. 

01-0137 $30.00 

FASTEX BUCKLES 

A plastic, two-part side release buckle. Size 

indicates width of the webbing; 1-1/2" is 

used on Murray harnesses. 

01-0148 3/4" $2.00 

01-0145 1" $1.50 

01-0146 1-1/2" $2.25 

01-0147 2" $2.50 

Photos courtesy of Craig Schifferns 

D 

C-F. “KEY-HOLE” SYSTEM 

The safety-minded Key-Hole system offers many advantages over the traditional hook design. Its low 

profile design is less likely to get hooked unintentionally and the system will stay hooked until purposefully 

removed. A low profile means much easier reboarding and less likelihood of scratching gel coat, 

point loading or damaging a hull. Ball-end trapeze rings are lighter and less dangerous than stainless 

dogbones or trapeze rings. The 10" Key-Hole buckle fits Murray harnesses except Classic (unless you 

sew it on), all Gul, Magic and most Hobie harnesses. The super-strong carbon buckle weighs only 7.5 

oz. Order buckle and connectors (sold by the pair) separately. 

Key-Hole Buckle 

C. 01-0311 Carbon Key-Hole Buckle Only $99.00 

Key-Hole Connectors 

D. 01-1212 Key-Ball “Original” Connectors–pair $28.00 

E. 01-1213 Key-Ball Can't Hurt Connectors– pair $26.00 

F. 01-0142 Key-Ball Can't Miss Connectors– pair $28.00 

3 


2 

THE BASICS 

OF TRAPEZING 

E 

1. Start by sitting on the hull or sidebar with the trapeze ring hooked to 

the harness. The trapeze system should be adjusted so that the rope lock is 

snug to the turning block. 

2. Using one hand to steady yourself, slowly ease your weight over the 

side by pushing out on the deck or trampoline with your feet. Your other 

hand should be holding onto the trapeze handle for balance. Stand on the 

side of the hull or sidebar with your weight hanging from the wire. 

3. When pushing out, try to keep more weight on your forward foot with 

your feet spread about two feet apart, keeping your aft leg slightly bent. 

For coming in, reverse the entire process. 

1 

C 

Murrays Harnesses .................... pg 44-45 


Wetsuits ............................................. 10-11 

4. The correct trapeze setting is to have your body 

resting nearly parallel to the trampoline. Beginners can 

set it a little bit higher, and experts a little bit lower. To 

adjust trapeze height while sailing, use an adjustable 

trapeze kit (see page 49). 

F 

Spreader and connectors 

are sold separately

GUL CATAMARAN & DINGHY HARNESSES 


D. GUL “STOKES” HARNESS 

WITH SPREADER 

• Padded sides. 

• Adjustable back pads. 

• Adjustable buckle fastening. 

• Full personalized adjustments. 

• Ladder lock adjuster covers. 

• Universal spreader bar attachments. 

• Wide load-bearing spreader bar is included. 

$119.00 

34-2032 Junior Large 

34-2035 Small/Medium 

34-2037 Large/X-Large 

GUL HARNESS WAIST SIZES 

Junior Large/Adult Small 26" - 30" 

Small/Medium 29" - 35" 

Large/X-Large 35" - 40" 

All GUL harnesses include spreader bars. 


D 

47

TRAPEZE RINGS, HANDLES & ACCESSORIES 

D 

A 

A. NYLON TRAP HANDLE 

A contoured safety grip and a wire guide prevent 

hand contact with wire. A recessed cavity in the 

base holds the nicropress oval and shields the 

sailor from sharp wire ends. Each. 

27-0412 $4.60 

B. RONSTAN TRAP HANDLE 

Add color and comfort 

with Ronstan's molded 

nylon trapeze handle. 

Skipper and crew's trapeze 

can be color-coded for 

easy identification. Green has been discontinued 

by the manufacturer. Each. 

21-0171R Red $9.85 

21-0171B Blue $9.85 

C. REPLACEABLE TRAP HANDLE 

Foam-covered aluminum handle is easily 

installed onto existing trapeze wire. Carry a spare 

as a temporary repair, then replace the wire at 

your convenience. Each. 

07-2010 $20.95 

If a trapeze handle has been broken, 

a single trapeze wire can be purchased. 

Please refer to page 52. 

“KEY-HOLE” CONNECTORS 

& SPREADERS 

For safety-minded sailors, the low 

profile Key-Hole system offers many 

advantages over the traditional hook 

design. Choose from three different 

connector types. 

See page 46 for complete details. 

Trapeze Harnesses .....................pg 44-47 


Trapeze Wires ...........................................52 

E 

B 

F 

C 

D. CAN'T HURT 

A light and flexible alternative to “hard” stainless 

steel dogbones. Black high pressure nylon tubing 

covers 1/8" (1x19) stainless wire. Pair. 

01-0123 $18.50 

E. CAN'T MISS 

Designed to allow 

the sailor to hook-up 

without even looking 

at his trapeze hook. 

This lightweight, extra-wide hook-up ring has a 

center-hold handle with molded finger ridges. 

Double swaged 1/8" (1x19) wire is coated with 

black or clear high pressure nylon tubing. Pair. 

01-0124BK Black $26.00 

01-0124CL Clear $26.00 

F. DOGBONE 

Original equipment for Hobie ® trapeze systems. 

6" long with 1-1/2" rings. Each. 

25-3610 $15.25 

G. 7-1/2" ELONGATED RING 

Easy-to-hold short keyhole with two adjustment 

positions. 7-1/2" long with 1-7/8" ring. Each. 

25-3620 $12.00 

G 

ROPE LOCK 

Easy-to-adjust 

black rope stop 

and lock for 

trapeze height 

adjustment. 

Standard on 

Hobie ® , Nacra 

and Prindle. 

Double-up backto-back 

for extra strength. Each. 

01-0120 $2.25 

CLAMCLEAT ® WITH ROLLER 

Allows for 2:1 trapeze adjustment while hooked 

up. Line rolls easily on large base roller. 1/4" line 

capacity. Each. 

27-0253 $25.60 

RONSTAN BACK-TO-BACK BLOCKS 

As used on the Murrays No-Cut Hi-Low Trapeze 

Adjustment Kit. Ball bearing blocks with 3/4" 

sheaves and 1/4" maximum line diameter. Max. 

working load is 550 lbs.; breaking strength is 

1210 lb. Each. 

21-2028 $21.75 

SMALL BULLET BLOCK 

As used in our No-Cut EZ-Up Trap Ring Return 

Kit. 1-3/16" sheave, Teflon ® bearing. 5/16" line 

capacity. Each. 

23-0911 Small Bullet Block $7.00 

23-0912 with Removable Sheave $8.50 

HARKEN ® MICRO SINGLE BLOCK 

A premium quality block for your trapeze return 

system. Either swage in place or hang with 

#21-0615 shackle. Block has 7/8" sheave, Delrin 

ball bearings and 1/4" maximum line capacity. 

Safe working load is 200 lbs.; breaking strength 

is 1200 lbs. 

28-0224 $10.10 

NACRA CROSSBAR END CAP 

This PVC crossbar cap protects the crew and 

gives a finished appearance. Use on the rear 

crossbar as is or drill to accommodate shock cord 

on front crossbar. 

56-3503 $27.50 

Team Alexander 


TRAPEZE SHOCK CORDS 

A trapeze shock cord is an absolute necessity 

because it keeps the trapeze system in place 

and ready for hook-up. One hook connects to 

either the thimble on the trapeze wire or the 

adjustment line, then runs under the tramp 

and connects to the other side in the same 

location. 

H-14/16 

Plastic carbine hooks at each end of 1/4" 

diameter 8' shock cord provide quick connection 

to trapeze wires or adjustment lines. Each. 

01-0128 $8.00 

BASIC H-18 

Includes four 7' lengths, each with a plastic 

carbine hook secured with a cinch ring on one 

end. Kit is supplied with 4 cinch rings to finish 

installation. 

01-0129 $24.00 

H-17 

Shock cord comes with one plastic carbine hook 

installed. Other hook is installed after lacing 

shock cord through trampoline grommets. Cord 

is 1/4" diameter by 12'. Each. 

01-3520 $10.50 

H-20 

Shock cord comes with one plastic carbine hook 

installed. Other hook is installed after lacing 

shock cord through trampoline grommets. Two 

lengths of 1/4" shock cord: 6' and 16'4". Each. 

01-0131 $20.00 

NACRA ® /PRINDLE ® /SOL CAT ® 

A plastic carbine hook installed on one end only. 

The other hook is included to be installed after 

the shock cord is put on the boat. Cord is 1/4" 

diameter by 9'. Each. 

01-8019 $9.00 

PLASTIC CARBINE HOOK 

A quick connection of 

trapeze shock cord to 

height control adjustment. 

2-1/4" long. Each. 

01-0127 $1.60 

UPGRADING YOUR TRAPEZE ADJUSTMENT ASSEMBLY 

Height Adjustment: Stock trapeze systems permit only rough height adjustment capability. 

Active trapeze “artists” need more! The next level of sophistication is to incorporate a height 

adjustment mechanism that functions “on the fly” without sacrificing the smooth recoil feature 

above. 

Positive Recoil: The height adjustment mechanism should freely recoil so that the trapeze ring 

does not unexpectedly disengage from the trapeze hook while shifting fore & aft or in & out in 

response to changing winds or headings. 

Trapeze Rings: The lighter the better because no one likes to be hit by a hard, heavy swinging 

trapeze ring. However, a larger trapeze ring is useful as a height adjustment mechanism when no 

other adjustment is available. 


TRAPEZE ADJUSTMENT KITS 

Trapeze adjustment kits may be added to 

wire with no installation charge! 

Indicate choices when ordering and wire 

length will be adjusted accordingly. 

To demonstrate use, all trapeze 

adjustment kits are shown connected to 

trapeze wire, trapeze shock cord and 

optional Can't Miss Rings. 

A-B. EZ-UP TRAP RING RETURN KITS 

Reduce friction on stock trapeze systems by installing 

a kit with bullet blocks. On older boats that don't 

include a trapeze return kit, these kits will make 

hooking up much more predictable. Inadvertent 

unhooking from the trapeze is greatly reduced 

by providing upward tension on the trap ring. 

Bullet blocks permit the shock cord to retract the 

adjustment line smoothly, maintaining constant 

tension between the trapeze ring and hook. 

“No-Cut” EZ-Up Kit includes bullet blocks with 

removable sheaves which attach to trapeze wire 

ends without cutting or adding shackles. Harken 

EZ-Up Kit is recommended when wires are 

being cut or if trapeze is being ordered with 

EZ-Up installed. Both kits include height 

adjustment lines, rope locks and instructions. 

Order rings, shock cord and shackle 

(Harken EZ-Up Kit) separately. Pair. 

A. 01-1120 “No-Cut” EZ-Up Kit $24.00 

B. 01-1121 Harken EZ-Up Kit $34.00 

28-0082 Harken Bullet Block Only $12.75 

HI-LOW TRAPEZE KIT 

Simple and adjustable on the 

fly, with constant upward 

tension on the trapeze ring 

and separate on-the-wire 

height adjustment. Easy to 

hook up and hike out with no 

initial adjustments. Very low 

stretch lines, Ronstan ® turning 

blocks and aluminum 

Clamcleats ® with roller 

fairleads for 2:1, 

easy-pull, easy-release 

height adjustment. 

Crew can move 

fore or aft while 

maintaining proper 

height. Constant, 

smooth-action 

tension on the 

trapeze ring 

helps avoid 

accidental 

unhooking. 

Lower 

T-handle is always 

within reach. Stock 

trapeze wire must be shortened 

by approximately 10"; we will install 

the kits for you when you order trapeze 

wires. Includes V-jam cleats, mid-level 

handle/block assembly, rope locks 

and line. Order rings and shock cord 

separately. Pair. 

01-1140 $139.00 

NO-CUT HI-LOW 

TRAPEZE 

HARDWARE KIT 

Adjustable on the fly 

and there is no 

need to cut your 

trapeze wires for 

installation! This 

simplified version of 

the Hi-low Trapeze 

Kit utilizes a lower 

profile block 

system without 

the intermediate 

handle so 

there is no 

need to cut 

the trapeze 

wires. 

Includes 

V-jam 

cleats, 

backto-back 

Ronstan ® bullet 

blocks, rope locks 

and line. Does not include trapeze 

rings. We suggest purchasing Can't 

Miss Rings (shown) to supply a 

handle down low when needed. Order 

shock cord separately. Pair. 

01-1130 $118.00 


A 

Photo courtesy of The Cat House 

Harnesses & Accessories .......... pg 44-47 

Trapeze Wires ......................................... 52 

B 

49

STANDING RIGGING 

DOUBLE SWAGED THIMBLE 


All standing rigging is double swaged 

unless otherwise specified. Terminals 

will be per current factory specifications. 

Shrouds and bridles are sold each and 

should be bought in pairs to ensure equal 

lengths. 

Our hydraulic swager exerts a 

force of over 10,000 pounds 

to quickly swage without 

work-hardening the stainless 

fittings. 

HYDRAULIC SWAGED 

SHROUDS WITH 

STAINLESS FITTINGS 

Hydraulic swaging produces 

a cleaner, stronger shroud. 

A marine eye is installed at 

the bottom end fitting where 

breakage commonly occurs. 

Electrolysis is reduced because 

both wire and marine 

eye are stainless steel. Wire 

manufacturers recommend 

stainless steel marine eye terminal 

fittings for 1 x 19 wire 

to assure full rated strength of 

wire. Each. Purchase two to 

ensure equal lengths. 

Other Rigging ........... pg 51-52 

Rigging Hardware ................ 53 

Trapeze Assemblies ............. 52 

Wire ........................................... 53 

Wire Covers ............................. 53 

Murrays has over 30 years of experience 

producing rigging especially for catamarans. 

Choose from our wide selection of rigging 

already in stock or have us custom make 

rigging to your specifications. 

FORESTAY 

UPPER 

FORESTAY 

BRIDLE 

BOAT WIRE SHROUD (EACH) 

Purchase two to ensure equal lengths. 

Getaway 5/32" 02-0905-02 

$46.00 

Wave 1/8" 02-0804-02 

$29.00 

Standard Hydraulic Swaged 

FORESTAY 

Lower forestay unless noted as upper. 

BRIDLE (EACH) 

Purchase two to ensure 

equal lengths. 

Black White Black White Black White Bare Black White 

Tiger 5/32" — — 02-6005-12 

$60.00 

H-14 1/8" 02-0104-02 

$28.00 

H-14 Turbo 1/8" 02-0104-02 

$28.00 

H-16 1/8" 02-0204-02 

$33.00 

— — — 02-0945-12 

$50.00 

— — — 02-0844-02 

$25.00 

02-0104-01 

$28.00 

02-0104-01 

$28.00 

02-0204-01 

$33.00 

— 02-6045-32 

$62.00 

02-6035-02 Upper: 

No Swivel $18.00 

— — 02-0144-02 

$25.00 

— — 02-0915-22 

$32.00 

— — 02-0814-02 

$20.00 

— — 02-6015-22 

$46.00 


02-0144-01 

$25.00 

— — — 02-0134-01* Upper 

$80.00 

02-0204-12 

$38.00 

H-16 5/32" — — 02-0205-12 

$54.00 

H-17 1/8" 02-0304-02 

$33.00 

SAVE 10%… 

Ask for your 

rigging package 

discount when you 

order a set of 

2 shrouds, 

1 forestay and 

2 bridles! 

SHROUD 

02-0304-01 

$33.00 

02-0304-12 

$38.00 

H-17 5/32" — — 02-0305-12 

$54.00 

H-17 Sport 5/32" — — 02-0305-12 

$54.00 

H-18 5/32" — — 02-0405-12 

$56.00 

* With swivel ** With stud † With turnbuckle 

Joel makes Murrays rigging 

right on our premises to ensure 

quality and timely delivery. 

02-0204-11 

$38.00 

02-0244-02 

$30.00 

02-0244-02A Aussie 

$35.00 

02-0244-01 

$30.00 

— 02-0114-02 

$20.00 

— 02-0114-22 

$28.00 

02-0244-00 

$28.00 

— — — 02-0235-00 Upper 

$16.00 

02-0304-11 

$38.00 

02-0344-02 

$25.00 

02-0344-01 

$25.00 

02-0214-02 

$19.00 

02-0215-02 

$25.00 

— 02-0314-02 

$25.00 

— 

— 

— 

02-0114-01 

$20.00 

02-0114-21 

$28.00 

02-0214-01 

$19.00 

— 

02-0314-01 

$25.00 

— — — — — — 

— 02-0345-32 

$62.00 

02-0335-02* Upper 

$82.00 

— 02-0445-32 

$62.00 

02-0435-02 Upper 

$85.00 

— — 02-0315-22 

$46.00 

— — 02-0415-22 

$46.00 

— 

—

RIGGING TIPS 

Indicators for 

Future Failures 

Indicators for 

Future Failures 

Rigging should be inspected 

every time you sail. Any wire 

with a broken strand should 

not be used and immediate 

replacement is suggested. 

Weak areas can be indicated 

by a kinking or severe discoloration 

at the oval. Taking care 

when stepping the mast helps 

prevent future problems. Lay 

things out beforehand to be 

sure that everything is leading 

straight (no twists or kinks), 

especially near fittings. Also 

check to see that wires will not 

catch as the mast is raised. 

Tips on 

Choosing Rigging 

All of our rigging is constructed 

of stainless steel wire. Any 

other type of wire is not 

suitable. 

Bare wire is slightly more 

economical, but coated wire 

offers many advantages. 

Coated wire is easier to clean, 

stays cleaner, keeps your sails 

cleaner, and doesn't wear your 

sails as much as bare wire. The 

thin, smooth vinyl coating adds 

minimal weight and windage. 

All of our standing rigging is 

double swaged for maximum 

strength. Hydraulic swaging 

provides many benefits and 

is available as an upgrade 

on shrouds (see “Hydraulic 

Swaged Shrouds”). The majority 

of shroud failures occur 

at the nicropress oval, where 

electrolysis between the copper 

oval and stainless steel wire has 

occurred. Electrolysis is virtually 

eliminated when a stainless 

steel, hydraulically swaged fitting 

is used. Hydraulic swaging 

also allows easier inspection 

of possible broken wires and 

cracked end terminals. 

The overall best choice is 

pre-coated, hydraulic swaged, 

when applicable. As always, 

we will be happy to assist you 

with your selection. 

BOAT WIRE SHROUD (EACH) 

Purchase two to ensure equal lengths. 

Standard Hydraulic Swaged 


FORESTAY 

Lower forestay unless noted as upper. 

BRIDLE (EACH) 

Purchase two to ensure 

equal lengths. 

Black White Black White Black White Bare Black White 

H-18SX 5/32" — — 02-0605-12 

$58.00 

H-20 5/32" — — 02-0705-12 

$62.00 

H-20 RF 5/32" — — 02-0705-12 

$62.00 

H-21SC 5/32" — — 02-0405-12 

$56.00 

H-21SE 5/32" — — 02-0505-12 

$62.00 

P-16 1/8" 02-2204-02 

$33.00 

02-2204-01 

$33.00 

02-2204-12 

$38.00 

P-18 5/32" — — 02-2305-12 

$58.00 

P-18.2 5/32" — — 02-2505-12 

$59.00 

P-19 5/32" — — 02-2405-12 

$62.00 

N-5.0 5/32" — — 02-4105-12 

$56.00 

N-5.2 5/32" — — 02-4205-12 

$56.00 

N-5.5SL 5/32" — — 02-4305-12 

$58.00 

N-5.7 5/32" — — 02-4305-12 

$58.00 

N-5.8 5/32" — — 02-4505-12 

$60.00 

N-6.0 5/32" — — 02-4605-12 

$62.00 

N-6.0NA 5/32" — — 02-4705-12 

$64.00 

Nacra/ 

Inter 17 †† 

Nacra/ 

Inter/F18/ 

Infusion †† 

Nacra/ 

Inter 20 †† 

1/8" — — 02-5204-12 

$40.00 

5/32" — — 02-5305-12 

$60.00 

5/32" — — 02-5405-12 

$62.00 

Sol 18 1/8" 02-6204-02 

$34.00 

02-6204-01 

$34.00 

— 02-0645-12 

$66.00 

02-0635-02 * Upper 

$84.00 

— 02-0745-82 ** 

$68.00 

— 02-0745-32 

$68.00 

02-0735-02 * Upper 

$84.00 

— 02-0445-32 

$62.00 

02-0435-02 * Upper 

$85.00 

02-0505-11 

$60.00 

02-2204-11 

$38.00 

02-0545-32 

$72.00 

02-0535-02 * Upper 

$84.00 

02-2244-42 † 

$58.00 

— 02-2345-42 † 

$79.00 

— 02-2545-42 † 

$80.00 

— 02-2445-42 † 

$80.00 

— 02-4145-12 

$54.00 

— 02-4245-12 

$54.00 

— 02-4345-12 

$58.00 

— 02-4445-12 

$55.00 

— 02-4545-12 

$56.00 

— 02-4645-12 

$60.00 

— 02-4745-12 

$65.00 

— 02-5244-02 

$19.00 

— 02-5345-92 

$64.00 

— 02-5445-12 

$65.00 

02-5445-32 RF 

$72.00 

— — 02-6245-02 

$32.00 

* With swivel ** With stud † With turnbuckle †† Pull-to-pull measurement required 

— — 02-0615-22 

$46.00 

— 02-0715-22 

$46.00 


— 

— 

— — — — 

— — 02-0514-22 

$46.00 

02-0545-31 

$70.00 

— 

02-2244-41 † 

$58.00 

— 02-0515-22 

$48.00 

02-2234-00 Upper 

$23.00 

— 02-2335-00 Upper 

$28.00 

— 02-2535-00 Upper 

$29.00 

— 02-2435-00 Upper 

$29.00 

02-2214-02 

$19.00 

02-2315-02 

$24.00 

02-2515-22 

$37.00 

02-2415-22 

$36.00 

— — 02-4115-22 

$45.00 

— — 02-4215-22 

$46.00 

— — 02-4315-22 

$45.00 

— — 02-4415-22 

$36.00 

— — 02-4515-22 

$46.00 

— — 02-4615-22 

$45.00 

— — 02-4715-22 

Bridle Foil 

Wire 

$45.00 

— — 02-5214-12 

$39.00 

— — 02-5315-22 

$45.00 

— — 02-5415-22 

$45.00 

02-6245-01 

$32.00 

— 02-6214-02 

$20.00 

02-0514-21 

$44.00 

02-0515-21 

$46.00 

02-2214-01 

$19.00 

— 

— 

— 

— 

— 

— 

— 

— 

— 

— 

— 

— 

— 

02-6214-01 

$20.00 

51

TRAPEZE ASSEMBLIES OTHER RIGGING 

BOAT 

SINGLE PAIR * 

TRAPEZE 

DOUBLE PAIR ** 

TRAPEZE 

BOAT WIRE MAIN HALYARD WIRE JIB HALYARD †† JIB BLOCK WIRE DIAMOND WIRE (EACH) 

Getaway 02-0973-60 $58.00 — — — 

Wave 02-0873-60 $60.00 — — — 

Tiger — 02-6086-00 RF $42.00 — 02-6095-20 $80.00 

H-14 02-0173-60 CompTip $55.00 

02-0173-50 Alu Mast $39.00 

— — — 

H-14 Turbo — — 02-0124-80 Under 

Tramp $58.00 

H-16 02-0273-60 Comp Tip $60.00 

02-0273-50 Alu Mast $45.00 

H-20 — 02-0783-50 $47.00 

02-0786-00 RF $45.00 

* Old-style; new style uses line only. 

** Swaging tool needed. 

*** With turnbuckle. 

† Constructed with stainless fork, jib roller and left-hand threaded stud. 

Turnbuckle not included on wires for Hobie 

SINGLE TRAPEZE WIRE 

(Not shown.) Replace that one damaged wire. 

Built to your boat's specifications. Please specify 

boat type and white or black coating. 

02-8253 $24.00 

CUSTOM RIGGING 

How to Order 

Simple as 1-2-3: 

PULL TO PULL 

® Black White Black White 

Getaway 02-0953-02 — — — 

$30.00 

Tiger — — 02-6063-02 

$85.00 

— 

H-14 & Turbo 02-0153-02 02-0153-01 — — 

$40.00 $40.00 

H-16 

H-17 

02-0253-02 

$45.00 

02-0353-02 

02-0253-01 

$45.00 

02-0353-01 

02-0263-02 

$85.00 

— 

02-0263-01 

$85.00 

— 

$45.00 $45.00 

H-17 & Sport 02-0353-02 02-0353-01 — — 

$45.00 $45.00 

H-18 — — 02-0463-02 02-0463-01 

$90.00 $90.00 

H-18SX — — 02-0663-02 02-0663-01 

$90.00 $90.00 

H-20 — — 02-0763-02 02-0763-01 

$95.00 $95.00 

H-21SE — — 02-0563-02 02-0563-01 

$96.00 $96.00 

P-16 02-2253-02 02-2253-01 02-2263-02 02-2263-01 

$45.00 $45.00 $85.00 $85.00 

P-18 — — 02-2363-02 02-2363-01 

$85.00 $85.00 

P-18.2 — — 02-2563-02 02-2563-01 

$95.00 $95.00 

P-19 — — 02-2463-02 02-2463-01 

$95.00 $95.00 

N-5.0 02-4153-02 02-4153-01 02-4163-02 02-4163-01 

$47.00 $47.00 $90.00 $90.00 

N-5.2 

N-5.5SL 

02-4253-02 

$46.00 

— 

02-4253-01 

$46.00 

— 

02-4263-02 

$88.00 

02-4363-02 

$90.00 

02-4263-01 

$88.00 

02-4363-01 

$90.00 

N-5.7 — — 02-4463-02 02-4463-01 

. 

$90.00 $90.00 †† Line not included; use low or no-stretch line. See photo at right. 

N-5.8 

N-6.0 

N-6.0NA 

— 

— 

— 

— 

— 

— 

02-4563-02 

$95.00 

02-4663-02 

$95.00 

02-4763-02 

$98.00 

02-4563-01 

$95.00 

02-4663-01 

$95.00 

02-4763-01 

$98.00 

Nacra 17 02-5253-02 — — — 

(Inter) 

$47.00 

Nacra 18 

(Inter) 

— — 02-5363-02 

$75.00 

— 

Rigging Tape ...................................... pg 53 

Rope .............................................................15 

Shrouds, Forestays & Bridles .........50-51 

Nacra 20 

(Inter) 

— — 02-5463-02 

$90.00 

— 


Trapeze Accessories ...............................48 

Sol 18 02-6253-02 02-6253-01 02-6263-02 02-6263-01 

$45.00 $45.00 $88.00 $88.00 

* Single Pair: The basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. 

Wires end just below handles. Order shock cord and adjustment kits separately. 

** Double Pair: Single continuous 3/32" (1x19) wire with thimble at the top and two handles per side for double trapezing. 

Order shock cord and adjustment kits separately. 

02-0284-00 $60.00 — — 

H-17 — 02-0386-00 $32.00 — — 

H-18 — 02-0486-00 $31.00 — 02-0494-20 † $56.00 

H-18SX — 02-0686-00 $32.00 — 02-0694-20 † $57.00 

1. Order custom rigging. Specify finished pullto-pull 

length. Pull-to-pull measurements 

are from the inside edge of the thimbles, 

eyes, or forks where the clevis pin makes 

contact under load. 

2. Order wire to next full foot. Specify size and 

coating color. 

3. Order end fittings. Example: Roller swaged 

eye or fork, or double swaged thimble. 

Fittings are shown on page 53. Finished 

dimensions guaranteed to be ± 1/8". 

02-9100 Custom Charge Per Wire $17.50 


— 

02-0724-20 $38.00 02-0795-20 $100.00 

Includes both sides 

H-21SC — 02-0486-00 $31.00 — 02-0494-20 $56.00 

H-21SE — 02-0586-00 $35.00 — 02-0595-20 $74.00 

P-16 02-2274-00* $70.00 — 02-2224-00** $11.00 — 

P-18 — — 02-2224-00** $11.00 02-2394-20*** $74.00 

P-18.2 — — 02-2424-20 $72.00 02-2394-20*** $74.00 

P-19 — — 02-2424-20 $72.00 02-2494-20*** $72.00 

N-5.0 02-4173-50* $60.00 02-4183-50 $65.00 — 02-4194-20*** $72.00 

N-5.2 02-4273-50* $64.00 02-4283-50 $65.00 — 02-4294-20*** $74.00 

N-5.5SL 02-4373-00* $68.00 02-4383-50 $60.00 02-4324-20 $73.00 02-4394-20*** $72.00 

N-5.7 02-4473-50* $62.00 02-4483-50 $67.00 — 02-4494-20*** $74.00 

N-5.8 — 02-4583-50 $68.00 — 02-4594-20*** $74.00 

N-6.0 — 02-4683-50 $57.00 02-4624-20 $72.00 02-4694-20*** $74.00 

N-6.0NA — 02-4783-50 $58.00 02-4624-20 $72.00 02-4794-20 Long*** $75.00 

02-4724-20 Short*** $65.00 

Nacra 17 — — — 02-5294-20 $78.00 both sides 

Nacra 18 — 02-5383-80 $60.00 — 02-5394-20 $80.00 both sides 

Nacra 20 — 02-5483-80 $70.00 — 02-5494-20 $99.00 both sides 

Sol 18 02-6273-00* $60.00 — — — 

WIRE 02-0273-60 

MAIN 

HALYARDS 

02-0273-50 

Thimble & double 

swage end fittings: 

02-9130 3/32" $5.50 

02-9140 1/8" $6.50 

02-9150 5/32" $7.50

A B C 

A. STAINLESS THIMBLE 

Size indicates wire or rope diameter. Each. 

21-0480 1/16" -3/32" $.85 

21-0484 5/32"-3/16" $1.60 

01-0034 3/32"- 1/8" $1.50 

01-0036 5/32"- 3/16" $1.60 

21-0486 1/4" $3.50 

B. NICROPRESS OVAL 

Locks wire rope to a thimble terminal. Close 

with an appropriate swaging tool for maximum 

strength. Each. 

02-1020 1/16" $.25 

02-1030 3/32" $.50 

02-1040 1/8" $1.10 

02-1050 5/32" $1.40 

C. STANDARD STOP SLEEVE 

Grips a single wire to provide a “stop” for halyard 

hooks or trapeze handle, etc. A special “J” size 

opening on a nicropress tool is required for 

closing. 

02-1031 3/32" $.50 

02-1041 1/8" $.65 

02-1051 5/32" $1.00 

02-1061 3/16" $1.10 

I 

H 

RIGGING HARDWARE & ACCESSORIES 

D E F 

D. MAIN HALYARD HOOK 

For H-14/16s, Prindles and Sol Cats and for 

Nacras that use the wire main halyard. 

25-3330 $9.00 

E-F. STAINLESS "S" HOOKS 

Welded hooks. #56-9650 is for all Nacras. 

#56-9839 is for Prindle-style jib halyards. 

E. 56-9650 $45.00 

F. 56-9839 $10.00 

G H 

G-H. RINGS 

G. 25-3050 2" Stainless (Prindle-Style Jib 

Halyards) $5.00 

22-3320 1/8" x 3/4" ID Stainless $2.25 

22-3525 3/16" x 3/4" ID Stainless $2.75 

25-3904 1/4" x 2" OD “D” Stainless 

$5.00 

H. 27-190570 3/8" x 2" ID Nylon $1.60 

STA/MASTER TURNBUCKLE 

Shorten your diamond wires and use 

an adjuster. The Sta/Master's finely 

calibrated center traveler quickly locks 

for exact repeatable settings for 

each condition. No need to swage. 

Stainless steel. Minimum length is 

4" with 2-5/8" range. Max. load 

1/8" cable. 

02-1043 $39.95 

SNAP-ON WIRE COVERS 

White, split, snap-on plastic tubes give the 

appearance of coated wire. The material is tough 

and slippery and causes no wear on sails. Dirt 

wipes off with a damp rag to keep sails clean and 

looking new. Non-yellowing. Each length is 6'. 

3/32": Trapeze wires. 

1/8": H-14/16 rigging (stock). 

5/32": H-18/20/21, Nacra & Prindle rigging. 

53-1003 3/32" Each $1.75 

53-1004 1/8" Each $2.00 

53-1005 5/32" Each $2.25 

1X19 STAINLESS WIRE 

The strongest, least flexible wire 

construction. Used primarily for 

standing rigging and trapeze wire. Available with 

white or black PVC coating extruded onto the 

cable to protect sails from wear. Sold per foot. 

02-0031 3/32" Bare $.45 

02-0031W 3/32" White $.60 

02-0031B 3/32" Black $.60 

02-0041 1/8" Bare $.70 

02-0041W 1/8" White $.90 

02-0041B 1/8" Black $.90 

02-0051 5/32" Bare $1.10 

02-0051W 5/32" White $1.60 

02-0051B 5/32" Black $1.80 

7X7 STAINLESS BARE WIRE 

Use: Main halyards and lanyards. 

Semi-flexible. Optimal turning 

radius is 72 times diameter. Sold 

per foot. 

02-0022 1/16" $.50 

02-0032 3/32" $.90 

SHROUD ADJUSTER COVERS 

Vinyl covers protect the crew and can prevent 

de-masting by protecting the split rings. Pair. 

01-1071 8" White $9.00 

01-1072 8" Black $9.00 

07-3261 12" Black $8.95 

M-O. 

SHROUD ANCHOR 

M N 

COMPONENTS 

Stainless adjusters 

have 1/4" holes. 

O 

M. 25-3310 7-Hole Shroud Adjuster $10.00 

N. 25-3300 10-Hole Shroud Adjuster $12.00 

O. 25-3320 Twist Toggle for Hobie ® /Prindle 

$9.60 

50-20100000 Shroud Anchor Pin H-16/17/18– 

1/4 x 5/8 $26.25 

56-1012 Shroud Pin P-15/16/18– 

5/16 x 1.2 $14.00 

56-1014 Shroud Anchor Bar P-15/16/18 

$19.50 

SHROUD 

TENSIONER/ 

DE-TENSIONER 

Reduce setup and 

take-down time on 

catamarans with 

high tension rigs. 

Racing class legal. Note: 

J K L 

Shroud must be shortened 8.25". Each. 

Note: Special machinery is required for 

02-1060 $73.50 

installation of these fittings. PRO RIG TENSION GAUGE 

H. MARINE EYES 

Stainless. 

02-1034 3/32" $7.50 

02-1044 1/8" $9.25 

02-1054 5/32" $11.25 

I. MARINE FORKS 

7X19 STAINLESS BARE WIRE 

Use: Running rigging and halyards. 

Flexible. It resists crushing 

and has good resistance to wear 

caused by flexing. Optimal turning radius is 27 

times diameter. Sold per foot. 

02-0033 3/32" $.95 

The Pro Model 

gauge is designed to 

provide an accurate 

measurement of the 

tension in 3/32", 

1/8" and 5/32" 

rigging wire with 

Stainless. 

02-0043 1/8" $1.20 

accurate and repeat- 

02-1035 3/32" $9.00 

02-1045 1/8" $13.50 

02-1055 5/32" $15.50 

J-L. MARINE TURNBUCKLES 

& REPLACEMENT STUDS 

Stainless. All are by C. Sherman Johnson except 

#02-1046. 

J. 02-1048 1/8" Turnbuckle $33.00 

02-1048-2 Turnbuckle Body Tubular 

$19.50 

02-1058 5/32" Turnbuckle $35.50 

K. 02-1049 1/8" Calibrated Stay Adjuster 

$35.00 

02-1046 1/8" Stud Right Hand $18.00 

L. 02-1047 1/8" Stud Left Hand $18.00 

02-1057 5/32" Stud Left Hand $19.00 

02-1056 5/32" Wire– 5/16" Stud & Nut 

(H-20 forestay upgrade) 

#2 SWAGE-IT RIGGING KIT 

Have everything there when you need it! For rigging 

and emergency repairs. Includes swage-it 

tool, cutter, extension wrench, and 1/16”, 

3/32” and 1/8” oval sleeves. Made in the USA. 

33-0012 $59.95 

#2 SWAGE-IT TOOL 

For nicropress oval sleeves in sizes 1/16", 3/32" 

and 1/8". Swaging pressure is applied by using 

a wrench to tighten bolts. Cadmium plated. 1/2" 

x 1" x 7". 

33-0002 $26.00 

HEAVY DUTY HAND SWAGER 

Features nonslip grip. Grooves 

accommodate oval sleeves sizes 

1/16", 3/32", 1/8", 5/32" and 

02-0053 5/32" $1.80 

RIGGING TAPE 

Protects against chafing 

and sharp edges while 

providing safety for sails, 

lines and rope ends. 

This self-bonding tape is 

waterproof and leaves no 

sticky residue. 1" x 15'. 

10-3460 $20.50 

able tuning. For 

standing rigging. 

33-1795 $112.99 

HARKEN ELECTRONIC RIGTUNE PRO 

Tune with 

precision for 

the winning 

edge! Eliminating 

guesswork, the 

fully calibrated RigTune Pro 

shows accurate measurements 

on an easy-to-read digital display. 

Stainless steel wire guides and cam resist deformation 

for accurate measurements every time. 

The splash-proof body of the Harken RigTune 

Pro allows sailors to readjust their rigs on the 

water. Accurate to the nearest kg on 2.5 to 5mm 

Thread = 5/16-24 RH $19.00 3/16". Includes calibrator. 19" long. 

rigging (wire rope, rod and PBO). 

02-1056-1 Nut Only for #02-1056 $2.00 33-0005 $149.00 

28-7850 $350.00 


Closed 

Open 

53

MAST SUPPORTS & STEPPERS 

WHY USE A MAST SUPPORT? 

A mast cradle or support protects your cat's mast and traveler track while trailering. Although life 

jackets or towels may seem like easy, inexpensive solutions, they tend to slip during transport 

and suffer damage in their own right. It's worth protecting your boat investment by using a 

good mast support. 

STAINLESS REAR 

MAST SUPPORT 

Strong and secure, trailer mounted, 

permanently attached support 

features heavy-duty, box stainless 

steel construction with carpeted 

cradle and hinged upright. Mast 

support extends 4-1/2" aft of rear 

trailer hull support. Mast rides about 

30" above trailer. To launch, the 

support easily hinges to 90° away 

from the boat. Universal mount 

included. 


13-3002 $149.00 

HOBIE ® MAST CRADLE 

This Wave-style cradle is a perfect and 

inexpensive solution for almost all Hobie 

Cats ® . Sturdy fiberglass construction with 

carpet to protect crossbar and mast. Securing 

the mast is quick and easy with integrated 

shock cord. If your boat's tiller crossbar is 

above the rear crossbar when your boat's 

rudders are locked in the up position, you will 

need to remove the tiller crossbar. 

07-3175 $71.00 

HAND WINCH 

Mounts on the front trailer mast support and aids 

in launching and mast stepping. 850 lb. capacity. 

We recommend using 25 feet of 3/16" 8-strand 

low-stretch line (#39-2311BK black). 

13-9272 $37.95 


EZ STEP MAST RAISER 

If you want easy, single-handed mast stepping, this is the kit 

for you! A simple gin pole arrangement stabilizes the 

mast so one person can raise and lower it. It requires 

a trailer winch (#13-9272), or you can use your 

block and tackle (mainsheet) for off-trailer 

use. Trapeze wires snap in place and 

are used to eliminate side-to-side 

sway. Works best with masts 

that don't need to be turned 

to the side for stepping; 

another person is required in 

that case. Attaches quickly, 

without tools or modifications 

to the boat. Rustproof 

aluminum and stainless steel 

construction. Weighs less than 5 lbs. and 

adjusts to fit any cat. 


13-9280 $209.00 

THE ULTIMATE, LIGHTWEIGHT STORAGE LOCKER! 

SPORT LOCKER MAX 

Performance Sports Intl. has created the ultimate 

box for your sailing lifestyle. The Sport Locker Max 

will hold all your boat and sailor gear, tool boxes, camping 

gear, even beach chairs. The long, low, wide design 

is ideal for trailer mounting. The sliding top front door 

provides access for quick, easy packing and removing 

of bulkier accessories and sailing gear. The hinged-angle rear 

door facilitates visibility and removal of longer catamaran 

sails and equipment. Shipped by truck directly from 

the manufacturer, the one-piece fiberglass box 

comes assembled and ready to use. The very 

roomy box measures 10’10” x 3’3” x 14” 

and has both top and end access. 

TRUCK FREIGHT ONLY 

13-0631 $995.00 

Hinged Angle 

Rear Door 

TRAILER BOXES 


CHOOSING A HULL CRADLE 

Cradles are designed to distribute the load 

of a boat over a large surface area, so choose 

a cradle that provides the most contact area 

possible. Carpet cushions and protects the 

hulls. The cradle should not pinch the hulls 

from the sides. If your boat is not listed, select 

a cradle that best matches the profile of your 

boat's hulls. Cradles must be used to maintain 

many boat warranties, including Nacras. 

A-C. HULL CRADLES BY HOBIE CAT ® 

Hobie's nicely finished cradles have rolled edges and 

carpet that wraps for better protection. #07-4801 

and #07-4803 are custom molded to the H-20 hull 

shape, but fit all Hobies except H-21SC/SE and Fox; 

they also fit P-18.2, P-19, Nacra 5.2 and 5.8. #07- 

4801 rear cradles are pivot mounted to aid moving 

boats on and off the trailer. #07-1624 has a unique 

bottom that will fit either a round tube such as a 

beach dolly or a flat surface. Cradles from Hobie ® do 

not include mounting hardware unless noted. 

A. 07-4801 H-20 Stern with Hinge Bracket 

– pair (mounting hardware 

included) $202.00 

B. 07-4803 Hobie ® Universal Bow – pair 

$168.00 

07-4800 Set of 4 (2 Bow, 2 Stern) $332.00 

C. 07-1624 Universal H21SE/SC, Tiger– pair 

(mounting hardware included) 

$120.00 

D-F. MURRAYS HULL CRADLES 

These cradles bolt directly to any trailer that utilizes 

2" cross supports, and will adapt easily to larger sizes 

by cutting off the leading edge of cradle. (Bolts are 

not included.) Also adaptable for use with homemade 

beach wheels. Universal size fits bows and 

sterns of most boats except Inters and Fox. Cradles 

have been confirmed to fit boats mentioned; please 

let us know of any boats to be added to the list. Each. 

D. 13-7010 Universal except Inters & Fox 

(compatible with H-Tiger rear) 

$52.50 

E. 13-7030 H-17/18 Bow $52.50 

F. 13-7020 H-20 Bow, Tiger Bow, N 5.7 Stern 

$52.50 

19-2222 Bolt 1/4-20 x 2.5" $2.20 

19-2516 Nylock Nut 1/4-20 $.45 

G. INTER CRADLES BY PERFORMANCE 

CATAMARANS 

For Inter 17/18/20 or F18. Carpeted upper on molded 

fiberglass construction with a 2" channel. This cradle 

is not pre-drilled and bolts are not included; use 

5/16" bolts of a length to fit your trailer. Each. 

56-C320 Factory Inter/F18 Cradle– 

each $60.00 

H. CAT TRAX CRADLES 

Carpet cushions your boat on these molded fiberglass 

cradles that are pre-drilled for bolts (not included). 

For trailer mounting, order aluminum plates 

separately. Pair. 

13-1407 Universal except Inters $129.00 

13-1412 For Inter 17/18/20, Infusion $139.00 

13-1408 Trailer Mount Backing 

Plates– Pair $15.00 

A 

B 

C 

D 

E 

F 

G 

H 

HULL CRADLES & TIE-DOWNS 

4-POINT TIE KIT 

Easy to adjust and secure. Includes four 1" wide nylon straps 

that loop around pylons or corners of crossbars and then 

secure to trailer with eye bolts (not included). “J” hook 

connection with plastic safety clips prevents inadvertent 

unhooking. Positive action cam will not open, even while 

under loose tension. For all Hobie ® and Nacra cats. Set of 4. 

01-1510 $55.00 

HULL TIE-DOWNS 

Popular with Prindles, these 

2"-wide nylon straps quickly 

hook to your trailer. Kwik-Lok ® 

buckles keep straps taut until 

released. Rated capacity is 2400 

lbs. per pair. Maximum working 

length is 72". Pair. 

01-1500 $22.00 

ACROSS-THE-HULLS 

TIE-DOWN 

2" webbing with covered steel 

roller buckle and double 1/4" steel 

“J” hook with safety spring snaps 

to prevent unhooking. 2" x 13'. 

2000 lbs. test. Order two to secure 

both front and rear of boat. Each. 

01-1501 $19.00 

TOGGLE STRAP 

3/16" shock cord. Holds 12"-24" circumferences. 

Each. 

13-1020 $3.00 


55

TORQEEDO ELECTRIC MOTORS 

ULTRALIGHT 402 KAYAK MOTOR 

The first genuine kayak motor “package” 

Includes: 400W/1hp motor, universal mounting system 

with auto kick-up and pull-down features that can 

be integrated with remote on-board steering; 

lithium-manganese high 

performance battery 

with integrated GPS; 

remote throttle control 

with magnetic on/off 

key with 4-function 

display that shows 

battery charge status, 

remaining range at current 

speed, speed over ground (GPS) and 

current power consumption in watts. 

71-1401 Ultralight Package $1,799.00 

71-1411 Spare Battery for Ultralight $599.00 

71-1912 Spare Propeller 8x8 for Ultralight $79.99 

CHEATA MOTOR BRACKET 

This anodized aluminum bracket keeps the motor 

completely clear of tiller and rudders. Bracket has 

stress limit of over 225 lbs. Motors used with it should 

be short shaft models not exceeding 3 horsepower 

and/or 30 lbs. 


13-1100 H-14/16 $395.00 

13-1101 H-20/21SC $450.00 

13-1102 Prindle/G-Cat/Tornado/ 

Mystere $395.00 

13-1103 Nacra 5.0/5.2/5.5/5.7/6.0 

$495.00 

13-1105 Super Cat $500.00 

13-1104 H-18 $425.00 

13-1106 Getaway/Wave $425.00 

13-1107 Inter 17/18/20 $495.00 

Includes remote throttle 

control, LIMA battery, 

and battery charger. 

TORQEEDO BASE MOTORS 

Torqeedo’s Base Motors are for fishing boats, skiffs, aux power for sailboats or beach cats to 1.5 tons. 

Twice as efficient as conventional electric trolling motors means twice the range with the same batteries, 

boat and speed. Includes battery adapter cable set (10ft) with integrated fuse for use with conventional 

batteries (batteries not included), high-efficiency motor and propeller; height-adjustable transom bracket 

with tilt and trim mechanism; height and angle adjustable telescopic tiller; and 

stepless forward/reverse speed control. Options: 1) Long or short shaft; 

2) Integrated lithium-manganese battery and charger. 

Base 401 

400W/1 hp, 12V, 20 lbs (plus 12V battery) for boats up to 

1600 lbs. 

71-1307 401S Base: Short $999.00 

71-1308 401L Base: Long $999.00 

71-1111 Optional LIMA Battery for 401 $599.00 

71-1113 Optional Charger for 401 LIMA Battery $69.99 

Base 801 

800W/2 hp, 24V, 21 lbs (plus two 12V batteries) for boats up to 3000 lbs. 

71-1309 801S Base: Short $1,199.00 

71-1310 801L Base: Long $1,199.00 

71-1112 Optional LIMA Battery for 801 $599.00 

71-1114 Optional Charger for 801 LIMA Battery $69.99 

MOTOR BRACKETS 

Connects to 

traditional 

battery or 

optional 

LIMA battery. 

TORQEEDO 

LIGHTWEIGHT 

ELECTRIC MOTORS 

Light, clean and virtually maintenance free, Torqeedo 

makes the most efficient electric motors and high power lithium-manganese (LIMA) batteries for 

kayaks, fishing boats, skiffs, sailboat auxilliary power, pontoon boats and more! 

TORQEEDO TRAVEL MOTORS 

Travel Motors disassemble and pack into a waterproof duffel/ 

backpack (included) for compact storage (approx 20”x12”x12”). 

Also, lithium-manganese high-performance battery replaces 

the need for external battery(ies) and cables. Order the optional 

battery cable set to enable use of an external battery. 

401 Travel 

400W/1 hp, 12V, 25 lbs. including LIMA battery. 

71-1107 401S Travel: Short $1,499.00 

71-1108 401L Travel: Long $1,499.00 

71-1113 Optional Charger for 401 LIMA Battery 

$69.99 

71-1115 Optional Battery Cable Set for 401/801 

$199.00 

801 Travel 

800W/2 hp, 24V, 26 lbs. including LIMA battery. 

71-1109 801S Travel: Short $1,699.00 

71-1110 801L Travel: Long $1,699.00 

71-1113 Optional Charger for 401 LIMA Battery 

$69.99 

71-1115 Optional Battery Cable Set for 401/801 

$199.00 

TORQEEDO CRUISE MOTORS WITH TILLER 

CONTROL 

Powerful electric outboard motors for fishing boats, pontoon boats or 

yacht tenders. Includes: angle-adjustable telescopic tiller with stepless 

forward/reverse speed control; voltage indicator provides estimated 

charge of connected batteries; transom bracket with gas-spring supported 

tilt/trim; hydrodynamically optimized shaft; high-efficiency drive train 

converts battery into propulsive power with unparalleled efficiency; and battery 

cable set with main switch and fuse. Option: Long shaft or short shaft. 

Cruise 2.0 with Tiller Control 

2KW / 5-6 hp 24V 41lbs. 

71-1205 2.0S Cruise with Cables: Short $2,699.00 

71-1206 2.0L Cruise with Cables: Long $2,699.00 

Includes cable set. 

TORQEEDO CRUISE MOTORS WITH REMOTE STEERING 

AND THROTTLE 

Same as above, but instead of tiller control, the Remote model includes: 

connection for standard remote steering; integrated GPS receiver 

supplies data for on-board information system; handle for tilting 

and trimming the motor; tilt/lock mechanism with setting options; 

remote throttle control with magnetic on/off pin and information 

display (battery charge status, remaining range at current speed, 

speed over ground and current power consumption in watts); cable set 

with HD cables and high-current plugs, main switch and fuse. 

Cruise 2.0 Remote 

71-1209 Cruise 2.0 Remote: 2KW / 5-6 hp, 24V, 38 lbs $3,199.00 

Cruise 4.0 Remote 

71-1211 Cruise 4.0 Remote: 4KW / 8-9.9 hp, 48V,40 lbs $3,699.00 

Motor folds for easy 

travel and storage. 

Includes remote throttle control, link arm 

(connects to remote steering), and cable set. 

Includes LIMA battery, 

battery charger, and 

waterproof travel bag. 


CAT TRAX 

Murray's choice for best beach wheels! This lightweight, yet sturdy rustproof beach 

two-ply pneumatic rubber tires. Roller bearings give low-friction wheeling. The standard len 

if specified. 


13-1401 Cat Trax for 8' to 8-1/2' wide Cats $419.00 

CAT TRAX REPLACEMENT PARTS & ACCESSORIES 

Optional accessories include a handle which enables you to pull or push your boat more easily, padded, 

fiberglass cradles which provide more support for rounded hulls, and an axle connector for easy 

breakdown and handling of the axle. Axles and handles are oversized and may incur additional freight 

charges. 

ASK ABOUT OVERSIZED SHIPPING RATES 

13-1401-1 Cat Trax Tire & Rim $129.00 

13-1401-2 Axle – Double-Drilled for 8' or 8'6" $85.00 

13-1401-3 Replacement Tire Only 21"x12.0-8 $65.00 

13-1401-5 Delrin Roller Bushing Set (for 1 wheel) $20.00 

13-1401-6 Axle Cover, Hose $9.00 

13-1401-7 Washer & Cotter Pin Kit $36.00 

13-1403 Molded End Cap (each) $15.00 

13-1406 Handle $135.00 

13-1407 Cradles (pair) $129.00 

13-1412 Cradles (pair) for Inter 17/18/20, Infusion $139.00 

13-1422 Wheel Only for Tiger Trax $72.00 

Handle 

13-1406 

Photo: Tucson Hobie Fleet 514 

BEACH TRANSPORT 

CAT TRAX WITH CRADLES 

13-1402 Cat Trax with Cradles– Specify Boat & Width $519.00 

13-1402-1 Cat Trax with Inter Cradles $529.00 


Best on hard, smooth, level surfaces 

TIGER TRAX 

The more economical Tiger Trax features blue plastic tires which are suitable for use on hard, smooth, 

level surfaces only. Oversized item; additional freight charges apply. 


13-1421 Tiger Trax for 8' cats $319.00 

Murrays Harnesses .................... pg 44-45 


Wetsuits ............................................. 10-11 


57

BOAT COVERS OTHER COVERS 

A 

A. NYTRIL POLYVINYL CAT COVERS 

Lightweight and waterproof basic one-piece covers fit loose and secure with nylon ribbon ties. Polyvinyl material with 

fiber laminate core effectively resists rips. Silver exterior color reflects heat. U-cut modifications OK. Hi-Crossbar model fits 

H-14/16 with raised tramps. Lo-Crossbar model fits cats with deck-tramps. Not suitable for trailering. 

See boat sizes below for more information. OVERSIZED SHIPPING RATES MAY APPLY 

29-0116 1-Piece Econo H-14/16 $199.00 

29-0117 1-Piece Econo Getaway (covers front tramp) $199.00 

29-0118 1-Piece Econo 16-18 ft. Low-Bar $219.00 

29-0120 1-Piece Econo 19-20 ft. $239.00 

B 

B. TOP GUN ® YARD CAT COVERS 

One-piece covers are our most popular covers! Ideal for beach or on-trailer storage with mast up or down. Not suitable 

for trailering. See boat sizes below for more information. OVERSIZED SHIPPING RATES MAY APPLY 

ONE-PIECE CAT COVERS 

Nytril Top Gun 

BOAT 

A B 

H-14 29-0116 $199.00 NA 

H-16 29-0116 $199.00 29-5116 $650.00 

H-17 29-0118 $219.00 29-5117 $750.00 

H-18, Magnum & SX 29-0118 $219.00 29-5118 $800.00 

H-20 29-0120 $239.00 29-5120 $825.00 

Wave NA Call 

Getaway 29-0117 $199.00 29-5115 $800.00 

FX one NA 29-5120FX $725.00 

Tiger NA 29-5118T $800.00 

P-16 29-0118 $219.00 NA 

P-18 29-0118 $219.00 NA 

P-18.2 29-0120 $239.00 NA 

P-19 29-0120 $239.00 29-5219 $750.00 

N-5.0 29-0118 $219.00 NA 

N-5.2 29-0118 $219.00 NA 

N-5.5SL 29-0120 $239.00 NA 

N-5.7 29-0120 $239.00 NA 

N-5.8 29-0120 $239.00 NA 

N-6.0 NA 29-5360 $800.00 

Nacra (Inter) 18 29-0118 $219.00 29-5418 $800.00 

Nacra (Inter) 20 NA 29-5420 $800.00 

Nacra Infusion NA 29-5358 $800.00 

F16 Blade NA 29-5364 $750.00 

F18 NA 29-5417 $800.00 

Tornado (Fully Enclosed) NA 29-5363 $900.00 

303 HIGH TECH 

FABRIC GUARD 

Restores 

lasting water 

and stain 

repellency to 

boat and sail 

covers, biminis, 

enclosures, 

carpeting and fabric 

upholstery. Resists 

soiling, mildew 

and contains 

UV screening 

agents to retard 

fading. Lasts up 

to 3 years. 16 oz. 

pump treats up to 

100 sq. ft. of marine canvas. 

40-6534 $16.50 

TRAMP PACK 

Secures between hiking straps to provide 

space for throwable cushions, spinnakers, 

life vests, etc. Includes 

big, 13" x 20" 

chart 

window 

and 18" 

x 24" x 4" 

deep storage 

compartment. 

Durable blue Odyssey 

material. 

31-1405BL $55.00 

RIGGING POUCH 

Keep wires clean, organized and 

attached to the mast. Mesh bag 

permits “rinse and dry.” 

31-2461 $55.00 

C-E. ZIPPERED POUCHES 

Constructed of rugged, water-resistant 

material with plastic hooks at each end to attach to the 

center or aft tramp lacing. Handy storage for 

replacement parts, keys, and safety 

gear. Blue or black as available. 

C. 31-1400 Halyard 5" x 9" 

$11.50 

D. 31-1401 5" x 12" $12.50 

E. 31-1402 7" x 17" $15.50 

FABRIC & WARRANTY INFORMATION 

NYTRIL POLYVINYL 

Economical. Universal sizing, 3-ply polyvinyl material 

resists rips from U-cut modifications. Ideal for under 

“messy” trees. One year warranty. Black inside. Silver 

outside reflects heat. 

TOP GUN ® 

10 oz. marine polyester that is coated by acrylic impregnation, 

then coated with Zepel ® for waterproofing 

and stain resistance. Strong, abrasion resistant, breathable, 

and water repellent with long-lasting color. Three 

year materials warranty; workmanship one year. Blue. 

ODYSSEY III 

This acrylic-coated polyester marine fabric repels 

water, the sun's harmful UV rays and mildew which 

can deteriorate other fabrics. It is used on Murrays 

bags and covers as noted. 


C 

D 

E

DAGGERBOARD COVERS 

Rugged, padded cover with double pocket and handles with velcro closure at the end. UV-resistant, blue 

Odyssey III fabric is laminated with 1/4" foam and lined with nylon to cushion the daggerboards. One 

cover holds both daggerboards. Measurements are inside dimensions. 

31-3005 Inter 17/18/20 (64"x8") $75.00 

31-3007 H-20/Nacra (63"x13") $115.00 

Hobie Cat® daggerboard covers also available (not as described above): 

31-3003 H-18 $99.00 

50-72410001 Tiger/Fox/FX-One $65.00 

COMP 

TIP COVERS 

Hobie Cat ® 

recommends that 

CompTips be covered to 

protect them from ultraviolet 

light. Top quality Odyssey III material is treated for 

UV-resistance and provides much better and 

long-lasting protection than nylon covers. Red-tip 

reinforced end. 

31-2441 For H-16/18/20 $59.00 

RUDDER COVERS 

A durable Odyssey III, 1/4" foam and nylon 

laminate cushions and protects rudders while 

trailering on or off the boat. 1" straps with 

plastic buckles hold covers in place. Red ends 

increase visibility when trailering. Pair. 

31-3101 H-14/16/17/18, Nacra 

(28" x 11") $69.00 

31-3102 H-20/21, P-19, Fox, Tiger 

(36"x12") $85.00 

31-3103 Nacra F18/20 

(39"x9-1/2") $78.00 

Pouches & Bags ................................ pg 58 

Repair Tape ................................................17 

OTHER COVERS 

SAIL & BOOM BAGS 

Universal sail and boom bags for Hobie ® Cats, Nacras, Prindles, etc. Standard model is a long sock with a cord-lock 

drawstring closure and a hand strap for carrying. Deluxe model includes a full length zipper for easy entry, carrying 

straps and an end tab with grommets for hooking to halyard shackle (to cover sail and boom while attached to mast 

when not sailing). Both are constructed of UV-resistant Odyssey III material. 

31-2425 Standard (10' x 30" circumference) $79.00 

31-2426 Deluxe (10' x 34" circumference) $129.00 

Also available: 50-21310000 Hobie Cat® Standard Sail & Boom Bag with Drawstring 9'5" $33.00 

MAST BAG FOR H-16, P-16 

A mast bag contains the mast and attached rigging and protects them from road grime 

that can be transferred to sails. Constructed of durable blue material with drawstring 

closure. 

31-2451 H-16, P-16 $99.00 

SNORKEL JIB COVERS 

Protect your roller furling jib from ultraviolet light and weather while on 

or off the boat. Snorkel has full-length zipper and can be left on when 

trailering. Raise cover with main halyard. Constructed of blue, high-quality 

Odyssey III material. 

31-2432 H-14 (13'11" x 11" cir.) $79.00 

31-2427 H-16/17/18 (17' x 11" cir.) $89.00 

31-2428 H-18SX/20/21SE & Prindle 18.2/19 

(23' x 18-1/2" cir.) $120.00 

31-2429 H-Fox/Tiger, F18, I-20 

(18'10" x 11" cir.) $99.00 


59

WINDSURFING VIDEOS & BOOKS HARNESSES 

THE ABC’S OF WATERSTARTING 

Dasher writes monthly articles for Windsurfing Magazine and has run 

a highly successful lesson program at Vela Windsurf Resorts’ Aruba 

location for years. He has finally put all that video experience to work 

in an impressive and highly polished new production. The waterstart 

is broken down into three steps: Gear Set-up, Fly the Sail, and Mount 

the Board. Common mistakes are covered and corrected, and the 

effects of light or heavy winds are described. You will not find a more 

complete, clear, and concise lesson on the waterstart anywhere… 

except perhaps on the beach in Aruba. 59 minutes. 

45-2178 DVD $29.95 

THE TWELVE STEP JIBE WITH DASHER 

A pivotal moment in any windsurfer's career is learning to jibe. It has 

never been made easier than with this video. The 12 Step Jibe will 

show you all the movements and help you solve common problems. 

This is Dasher's newest release and builds on the lessons taught in 

the ABC's of Waterstarting. The DVD contains core four lessons: the 

Set Up, the Initiation, the Foot Change, and the Sail Flip. Includes 

bonuses like Evolution of the Jibe and Jibe Meditation to round out 

this great video. 

45-2177 DVD $29.95 

WINDSURFING 101 

The instructors at Naish Hawaii, Hawaii's oldest windsurfing shop, 

will make you feel like you're getting a hands-on lesson along the 

shores of Kailua Bay. They'll start you off by covering safety, gear 

and wind knowledge. Then you'll do some dry land practice before 

heading out for three thorough on-the-water lessons. Step-by-step 

instruction, slow motion, stop action, and helpful graphics will 

make learning fast, easy and fun. 60 minutes. 

45-2174 DVD $29.95 

SPAM 2.0 

This DVD takes you across the globe to some of the best locations 

windsurfing has to offer. The action includes epic freesailing and 

world cup sections. With massive jumps, waves, the latest moves 

or hard crashes, this DVD has it all. Almost 60 minutes with bonus 

material that includes interviews and behind-the-scenes looks 

with the pros. 

45-2163 DVD $34.95 

PLUG N' PLAY 

This video elevates windsurfing right back up among the top extreme 

sports to watch. It’s a pure windsurfing video with 90 minutes of the 

most amazing, up-to-date and radical freestyle and waveriding action, 

exotic locations, polished editing, and a great soundtrack. Parental 

warning: Some foul language lyrics and a few “raunchy” scenes. 

45-2165 DVD $34.95 

WINDSURFING BOOK: THE SKILLS OF THE GAME 

This book teaches how to get started, how to improve, and how to 

acquire more advanced techniques. Includes a special section on 

competition. Illustrated throughout with photos and explanatory 

diagrams. Invaluable advice for windsurfers of all ages and abilities. 

©1994. Paperback. 128 pages. 

45-0090 Book $10.00 CLOSEOUT 

Sorry, videos may not be returned unless defective. 

DA KINE HARNESSES 

Da Kine offers a range of harnesses to make your sailing as comfortable and secure as possible while 

accommodating a wide variety of sailing styles. Whether you prefer a seat or waist harness, all of Da 

Kine's harnesses are built with attention to fit and function. They are crafted with the best materials 

available and designed with the assistance of the world's best sailors. 

QUICK RELEASE POWER CLIP BUCKLE 

Stainless system connects 

instantly and securely to 

both ends of the spreader 

bar. Webbing then connects 

to the Quick Release 

(and not the bar ends), 

making for ultra-smooth adjustment and greatly 

reduced bar roll. Narrow bend and stamped bars 

for added strength. System works equally well for 

right or left handed entry and release. 

32-1028 Replacement Power Clip 

Buckle– Pair $30.00 

POSI-LOCK BUCKLE 

SYSTEM 

The revolutionary Posi- 

Lock Buckle System offers 

a non-slip, unbreakable 

closure system. Corrosion-resistant stainless steel. 

DUAL POSI-LOCK 

The Dual Posi-Lock allows for the replacement 

and readjustment of the spreader bar webbing 

without having to send the harness in for repair. 

INDEPENDENT POWER BELT 

The Independent Power Belt incorporates an 

elasticized primary belt for increased comfort 

and performance. This belt provides total closure 

security, as well as back and side support, giving 

the sailor a positive harness positioning. 

DA KINE NEXUS WAIST 

Da Kine’s Nexus waist harness offers a low-profile 

3-D shape with Web-X dynamic support technology, 

compression molded inner, and internal batten support. 

The harness comes with load equalizer patches, plus 

an independent primary and secondary Power Belt for 

a super secure fit. Features Power Clip buckle system. 


$99.00 

32-1161 Small 


32-1163 Large 

32-1164 X-Large 

DA KINE T4 WAIST 

Da Kine’s thermoformed waist harness has a 

unique, three-piece outer design that provides 

maximum flexibility and support. It has a molded 

anatomical 3-D shape with a dual density inner and 

features a lightweight equalizer patch design, internal 

batten support, and an independent primary 

and secondary Power Belt for a super secure fit. This 

harness enables a sliding spreader bar and utilizes 

the Dual Posi-Lock system for secure, non-slip 

tensioning. Order spreader separately. 

$150.00 

32-1155 X-Small 

32-1156 Small 


32-1158 Large 

32-1159 X-Large 

DA KINE SONIC WAIST/SEAT 

Windsurf/Kite Crossover 

The Sonic is a combination waist and seat harness 

without leg straps and is designed for both windsurfing 

and kiteboarding use. It has a compression 

molded lumbar panel, pre-curved PEB inner support 

structure, independent primary and secondary 

Power Belt, and stainless steel leash attachment 

rings. Features Power Clip buckle system and 

adjustable spreader bar height. Order spreader 

separately. 

$120.00 

32-1151 Small 


32-1153 Large 

32-1154 X-Large 

60 WINDSURFING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change

DA KINE NITROUS SHORTS 


Da Kine’s Nitrous integrates years of harness 

development and technology with the styling 

and comfort of boardshorts. The kite/windsurf 

crossover Nitrous has an 8-point load dispersion 

system to keep you comfortable. Constructed of 

lightweight, quick-dry fabric, it features Da Kine’s 

PowerClip buckle system, ultra-comfortable 

internal leg straps, adjustable waist buckle and 

zipper, grab handle, stainless steel leash attachment 

rings, and a side pocket. Order spreader 

separately. 

$120.00 

32-1146-28 28" Waist 

32-1146-30 30" Waist 

32-1146-32 32" Waist 

32-1146-34 34" Waist 

32-1146-36 36" Waist 

32-1146-38 38" Waist 

DA KINE WOMEN'S STARLET 

SHORTS 


Da Kine's women-specific design is constructed 

of lightweight, quick-dry fabric and features the 

PowerClip buckle system, 8-point load dispersion 

system, ultra-comfortable, internal leg straps, 

adjustable waist buckle and zipper, removable 

grab handle, and stainless steel leash attachment 

rings. Assorted colors as available. Order spreader 

separately. 

$120.00 

32-1080 Size 6 

32-1081 Size 8 

32-1082 Size 10 

32-1083 Size 12 

WINDSURFING HARNESSES & SPREADER BARS 

DA KINE SPEED SEAT 

A Da Kine original, the Speed Seat offers tried 

and true fit and performance at an affordable 

price. Its features include independent back 

adjustment, adjustable lumbar wings, and load 

equalizer patches for a comfortable, custom fit. 

It also has self-tensioning leg straps and 2” Cam 

Lock buckle system. Order spreader separately. 

$60.00 

32-1110 X-Small 

32-1111 Small 


32-1113 Large 

32-1114 X-Large 

DA KINE WOMEN'S TEMPEST SEAT 


This women-specific harness is loaded with 

features. It offers a low-profile fit with adjustable 

hook height and contoured shaping panels that 

comfortably form the harness to your body. 

Features: adjustable hook height; Powerbelt 

system; PowerClip buckle system; 8-point 

load dispersion system; ultra-comfortable leg 

straps; stainless steel leash attachment rings; 

and integrated grab handle. Order spreader 

separately. 

$85.00 

32-1071 Small 


32-1073 Large 

DA KINE BLAST 

Loaded with features, the Blast harness offers 

low profile fit support, a Powerbelt system, 

8-point load dispersion system, self-tensioning 

legs straps, internal load equalizer patches 

and PowerClip buckle system. Order spreader 

separately. 

$80.00 

32-1116 Small 


32-1118 Large 

32-1119 X-Large 

DA KINE XT SEAT 

With its high back and compression molded 

lumbar panel, the XT Seat offers the ultimate in 

lower back support without sacrificing comfort. 

For racing or just cruising, the XT Seat features 

adjustable spreader bar height, independent 

primary and secondary Power Belt, internal 

batten support, 8-point load dispersion system, 

self-tensioning neoprene leg cinch straps, load 

equalizer patches, and PowerClip buckle system. 


$99.00 

32-1130 X-Small 

32-1131 Small 


32-1133 Large 

32-1134 X-Large 

COLORS 

Color selection varies and colors 

shown may not always be 

available. Please call if you have a 

specific color request and we will 

do our best to accommodate. 

DA KINE STAINLESS STEEL ROLLER 

SPREADER BAR 

Makes sail trimming effortless! This marine 

grade, non-corrosive stainless steel bar features 

a roller that reduces harness line wear. For 

windsurfing use only. 

01-0164 10" $30.00 

DA KINE KINGPIN SPREADER BAR 

Quickly connect and disconnect! Da Kine’s 10” 

stainless steel Kingpin design is overbuilt for 

undeniable strength. Horizontal pull keeps the 

bar down. Compatible with all Da Kine “Power 

Clip” harnesses. 

01-0180 10" $45.00 

DA KINE STAINLESS 

SPREADER BARS 

Marine grade, non-corrosive stainless steel 

spreaders have a hook designed for windsurfing. 

Much stronger than aluminum. 

01-0156 6" $20.00 

01-0155 10" $20.00 

01-0153 12" $20.00 

DA KINE WEBBING REPAIR KIT 

Replace worn harness webbing only for Posi- 

Lock buckles. 

32-1025 $10.00 

Da Kine Solo Bag .....................................65 

Kiteboarding Harnesses .......... pg 70-71 

Spreader bars are not included with harnesses; please order spreaders separately. 

DA KINE SIZING 

Harness Size Men's Waist Women's Waist 

XS 28" (71 cm) 26-28"(66-71 cm) 

S 30" (76 cm) 28-30" (71-76 cm) 

M 32" (81 cm) 30-32" (76-81 cm) 

L 34" (86 cm) 32-34" (81-86 cm) 

XL 36"-38" (91 cm) 34-38" (36-91 cm) 

Not all sizes are available in all styles. Nitrous shorts have waist sizing. 

Prices & specifications are subject to change www.murrays.com 800-786-7245 WINDSURFING ACCESSORIES 

61

HARNESS LINES FOOTSTRAPS 

DA KINE CLASSIC 

REACTIVE LINES 

The best on-the-fly adjustable harness lines 

available. Feature 8-plait prestretched FSE 

Robline or Marlow ® rope, high-density polyurethane 

tubing, and corrosion-resistant 

metal buckle. Non-slip pads prevent twist 

and slippage on the boom. 

32-1228 18"-24" $40.00 

32-1219 22"-28" $40.00 

DA KINE FIXED LINES 

Da Kine's Fixed Lines have clean, simple attachment. 

Non-slip boom pads prevent twist and 

slippage on the boom. Durable construction 

with 8-plait prestretched FSE Robline in highdensity 

polyurethane tubing. 

32-1205 20" $24.00 

32-1212 22" $24.00 

32-1213 24" $24.00 

32-1207 26" $24.00 

32-1210 28" $24.00 

DA KINE LINES 

These lines allow for custom length adjustment 

and feature 8-plait prestretched FSE Robline, 

high-density polyurethane tubing, and non-slip 

boom/bar pads to prevent twisting and slippage 

on the boom. 

32-1204 $26.00 

DA KINE MONO HARNESS LINES 

Da Kine’s Mono Harness Lines easily install on your 

boom. High-density polyurethane tubing covers 

8-plait, pre-stretched FSE Robline® rope. The 16" 

size is great for kids. Pair. 

32-1247 16" $24.00 

32-1248 20" $24.00 

32-1249 24" $24.00 

DA KINE SUPREMO FOOTSTRAP 

The Supremo features conventional outer styling with an innovative inner. For 

comfort, 7mm neoprene padding cushions the foot while a rolled inside 

edge eliminates pressure points. The internal adjustment system 

increases functionality and a pre-formed arch prevents collapsing. 

Twist is reduced by Da Kine's Control System. The Supremo is 

compatible with single or double inserts. Each. 

32-1305 $23.00 

DA KINE PRIMO FOOTSTRAP 

Da Kine's original footstrap is designed with a pre-formed arch to 

eliminate collapsing. It features 7mm neoprene padding, internal 

adjustment system and is compatible with both single and 

double hole footstrap inserts. Each. 

32-1300 $17.00 

DA KINE PROFORM FOOTSTRAP 

The Pro Form's external adjustment system gives easy adjustment on or 

off the water, so this strap is great for rentals, demos or rigs which 

are being shared. A pre-formed arch prevents collapsing, so 

your foot slides right in and is cradled by the comfortable 

7mm neoprene padding. Compatible with both single 

and double hole footstrap inserts. Each. 

32-1313 $18.00 

DA KINE CORE CONTOUR SYSTEM 

The specific front and back strap design provides a powerful 

and responsive foot-to-board connection. Front straps 

have a unique forward angle that fits the shape of the 

foot. The tapered outline of the back strap 

works like an offset strap on both 

tacks. Single and double insert 

compatibility. Includes 

Twist Control System. 

Modify your freeride 

or formula board with 

either an additional 

front or back Core 

Contour strap. 

32-1345 Set of 3 $75.00 

32-1346 Rear Strap Only (to make set of 4) $27.00 

Photo: Glenn Dubock 


TRACTION MAST, UNI & BOOM PADS 

DA KINE TWIST CONTROL SYSTEM 

Helps to lock down footstrap 

tabs and reduce 

twist. Works with all 

Da Kine footstraps 

and most others. 

32-1310 $6.00 

STRAP CONTROL 

Still the industry 

standard, Shred 

Tech Strap Control 

washers eliminate 

twisting by spreading 

the clamping load across the width of the 

footstrap. Injection molded using an unbreakable 

nylon material. Each. 

42-0201 $1.25 

3-POST INSERT 

This is the most commonly used adjustable 

insert. It has a good range of 0, 1" or 2". 

Lightweight. Features 10-32 brass inserts, 

stainless 10-32 x 3/4" screw and #10 x 3/4" OD 

washer. Each. 

01-9527 $4.80 

FOOTSTRAP INSERTS 

The best choice for custom fiberglass or epoxyskinned 

boards. Kit includes two inserts, stainless 

self-tapping screws and flat washers. 

01-9518 1" Kit $3.50 

01-9514 1" Insert Only $.65 

19-3211 Screw #10 x 1" $.34 

19-4011 Washer $.20 

Rope ..................................................... pg 15 

Windsurfing Harnesses ................ 60-61 

HYDRO-TURF 

Hydro-Turf with 2-way, machine-cut 

grooves (waffle pattern) is 3/16" thick 

and offers the best traction. Apply with 

contact cement. Comes as 36" x 50" 

sheet; half (18" x 50") and quarter 

sheets (9" x 50") are also available at a 

proportional price. 

41-2991BK Black $65.00 

41-2991BL Blue $65.00 

41-2991GR Grey $65.00 


30-2020 1" Bristle Brush $1.59 

RE-DEK TRACTION SYSTEM 

A quick and easy way to obtain permanent, professional-quality traction. Eight 

ounces of this extra gritty, ultra-clear, non-yellowing formula covers approximately 

18 sq. ft. Dries in 2-3 hours. Gallon size has no tray or roller. 

40-2010 Kit with 8 oz. $23.95 

40-2011 Gallon– Formula Only $89.00 

DA KINE BOOM BRA 

With foam padding and a quick and secure attachment 

system, Da Kine's Boom Bra contours to your boom to protect 

your board from boom damage. Assorted colors as available. 

32-1701 $12.00 

DA KINE WAI WAI BASE PAD 

Da Kine's exclusive, surf-proven design features high-density foam 

which covers the mast base, providing the ultimate in foot protection. 

Compatible with tendon and hourglass universals. Assorted colors as 

available. 

32-1726 $10.00 

DA KINE HD MAST PAD 

Protect your board from mast 

damage with this sleek, 14”-tall, 

super lightweight mast pad 

constructed of high-density foam. 

The pad is secured to the mast 

with a clip retention system. 


32-1730 $10.00 CLOSEOUT 

Michele Maldini Photo courtesy of Streamlined 


63

WINDSURF BAGS 

DA KINE ADJUSTABLE QUIVER BAG 

This versatile quiver bag with expandable end compartments adjusts from 6' (183cm) to 7' (213cm) to 8' (244cm) and 

is capable of holding up to six sails… and it can also hold two-piece masts! The 600D polyester bag features a zippered 

side storage compartment and handles for easy transport. 

32-1404 $90.00 

DA KINE DUPLEX QUIVER BAG 

The Duplex Quiver Bags offer a unique crush-proof strap tunnel for roof rack attatchment without crushing sails. 

Each quiver bag has separate sail and mast compartments that easily accommodate up to six sails and three 2-piece 

masts. Foam padding around the mast compartment increases protection and durability. A zippered side storage 

compartment, heavy-duty handles on both ends, and an exterior I.D. pocket top it off. 

32-1405 Wave 7'8" (234cm) $150.00 

32-1403 Freeride 9' (274cm) $150.00 

Rider: Bob Bohn Photo courtesy of Streamlined 

Rider: Bob Bohn Photo courtesy of Streamlined 

DA KINE SINGLE MAST BAG 

This bag holds one 2-piece mast with each piece protected in a separate compartment. Constructed 

of durable, heat-reflective energy shield fabric with reinforced ends. The quick-release 

buckle end adjusts to any size. 10" circumference; 8' (244cm) long. 

32-1408 $24.00 

DA KINE WINDSURF DAYLIGHT BAG 

This is the choice for day-use protection for the top of the car or back of the truck. The Daylite bag 

is constructed of heat-reflective energy shield and polyester materials to keep your board nice 

and cool and has 3/16" (6mm) foam padding and a reinforced nose patch to keep it protected. It 

closes with a wraparound zipper and can be comfortably carried with its padded shoulder strap. 

The bag also has a zippered fin slot. 


32-1466 8'4" x 29" (255 x 75 cm) $140.00 

32-1467 8'8" x 33" (265 x 85 cm) $150.00 


LADDER RAX FLEXIBLE STORAGE SYSTEM 

Made of durable polypropylene webbing, this versatile storage system keeps your equipment safely 

suspended off the floor. It is simple, takes up no space when not in use, and is so flexible that it works 

for virtually any kind of large and hard-to-store recreational equipment. Ladder Rax will conform to fit 

whatever is resting in it. The system can be hung from the ceiling or wall with the two tough hooks. 

Simply screw hooks into wood joists or studs approximately 48" apart, slip loop end of Ladder Rax over 

hooks, and start hanging! Holds 50 lbs. per rung, or 200 lbs. total weight. 

13-6220 $34.95 

DA KINE SOLO BAG 

This little zippered bag is great for storing safety 

supplies. It has multiple harness attachment 

options, internal bungee key holder, and side 

mount for quick, easy access. Measures 18cm x 

10cm x 4cm (approx. 7” x 4” x 1-1/2”). 

32-1410 $15.00 

Rider: Kai Katchadourian Photo: Charles Oreve 

TRANSPORT & STORAGE 

GARB TIE-DOWN STRAPS 

Garb Tie Downs attach to your rack and stay 

there. Once you adjust the buckle for the desired 

loop length, the Garb strap works as a modified 

bungee cord. Just tighten by pulling the webbing 

end and its elasticity holds your gear firmly in 

place. Easy to use, durable and treated for UV 

protection. Two per set. 

32-1512 $28.95 

DA KINE WET DRY DUFFLE 

Keep your wet items separated from your dry stuff in this versatile 

duffle's special tarp-lined wet compartment. The bag has a split-level 

design and features an insulated cooler pocket and a padded shoulder 

strap. 28" x 15" x 11" (71 x 38 x 28cm) with a volume of 4620 cu. in. 

(76L). 

32-4107 $60.00 

DA KINE WATERMAN HYDRATION PACK 

Stay hydrated with Da Kine’s Waterman Hydration Pack, featuring 

a 70-oz. (2 liter) wide-mouth reservoir, mesh side panels and 

lightweight poly/mesh construction. 

32-7062 $40.00 

BONEZ BOARD STACKERS 

Designed for stacking boards on roof racks. 

Concave shape provides maximum cushioning 

and stability. Pair. 24" x 2-1/2" x 2-1/2". 

41-3022 $18.95 

DA KINE RACK PADS 

Rack pads are constructed of durable 600D polyester 

fabric with hook and loop closure for quick 

installation and removal. Custom extruded foam 

fits a wide range of crossbars. Pair of 17" pads is 

available in assorted fabrics as stock permits. 

32-1504 $20.00 

DA KINE RACK STRAPS 

Da Kine's proven design is constructed of heavyduty 

polypropylene webbing with heavy duty, 

1" cam buckles and buckle pads for protection. 

Includes two 12' straps and carrying bag. 

32-1510 $18.00 

TOGGLE STRAP 

A quick tie-down. 

Order readymade 

or, to 

do it yourself, 

order 3/16" 

shock and rope end stop. 

13-1020 Toggle Strap 12" $3.00 

27-0199 Rope End Stop Only $2.10 

Other Da Kine items are available 

by special order. 

Zippered Pouches ............................ pg 58 


65

STREAMLINED UNIVERSALS & EXTENSIONS 

A B D 

A-C. QUICK-LOCK SYSTEM 

This double-strong, two-bolt, quick release system 

has set a new standard for its low profile design, 

strength and security. The universal is extremely 

low and the base cup height is the lowest of any 

high performance universal. It is easy to use and 

exceptionally strong. Stainless steel, sliding lock 

plate with a large diameter stainless steel lock button. 

A. 03-2300 Quick-Lock with Base Cup $92.95 

B. 03-2399 Quick-Lock with Euro Pin $91.95 

C. 03-2323 Plate Only $36.95 

03-2324 Uni with Base Cup for Quick-Lock $67.95 

03-2325 Uni with Euro Pin for Quick-Lock $65.95 

03-0198 Channel Insert 6mm Stainless $2.00 

03-0199 Flat Head Machine Screw 6mm $1.50 

STREAMLINED TRIPLE BLOCK 

Streamlined developed this triple block for even easier downhauling. It clips, 

gap-free, to the tack grommet or triple brackets found on most sails. It has three 

ball bearing sheaves to reduce friction, perfectly aligned for the 

Quick-Six. This triple block, combined with the Quick-Six 

with brass or ball bearing sheaves, is incredible. Super 

powerful, easy and simple! 

03-2623 With Brass Sheaves $23.00 

03-2623B With Ball Bearing Sheaves $36.00 

P-Q. QUICK-SIX DOWNHAUL CLEAT 

Streamlined's Quick-Six downhaul cleat 

originally incorporated large diameter 

brass sheaves. In 1998, ball bearing 

sheaves were introduced as an option. 

This design further reduces friction, so 

even more sailors can rig without tools 

or devices. The Quick-Six rigs rapidly, 

P Q 

requires no threading at the cleat, and provides 6 to 1, no-crossover purchase power. 

Available on Streamlined's extensions or a la carte for an easy bolt-on upgrade for 

most mast bases. 

P. 03-2621B Quick-Six with Ball Bearing Sheaves $35.95 

Q. 03-2621 Quick-Six with Brass Sheaves $22.95 

C 

FOR BASE CUP 

WITH BRASS 

SHEAVES 

WITH BALL 

BEARING 

SHEAVES 

FOR EURO PIN 

WITH BRASS 

SHEAVES 

EURO PIN ONLY 

This pin fits most Euro-style 

extensions. 

03-0299 $10.95 

STREAMLINED REDLINE EXTENSIONS 

Streamlined's REDLINE extensions a dence! Redline extensions are evolved from Streamlined's 

popular Super-lite line that was tried, tested, and proven for years. They start with their own 

unique 6061 T-8 drawn aluminum tubing, made in the U.S.A. All are anodized red, inside and 

out, and have numbered increments every two centimeters. Select an extension based 

on the diameter of your mast and if it will attached to a U.S. base cup or a Euro pin, 

then choose either a short or long model. Upgrade to ball 

bearing pulleys for easier downhauling, especially 

with race sails. All have a secure, foolproof 

adjustment pin tethered to a stainless 

steel reinforced nylon collar and incorporate 

Streamlined's powerful 

“Quick-six” downhaul 

cleat system and low- 

stretch downhaul line. 

All Euro pin models 

incorporate Streamlined's new latch system. 

TENDON JOINT 

Streamlined's tendon universal joint system is the only one 

with a true four-line safety system. You can retrofit virtually any 

system to the original tendon. Includes tendon joint with 8mm 

studs, washers and nuts. 

03-2220 $36.95 


03-0200 Tendon Urethane 2-1/16”– 1994 to present $13.50 

03-0203 Tendon Screw with Nut – 1994 to 2006 

(fits cast aluminum cup) $2.00 

03-0223 Tendon Screw with Nut – 2007 & later 

(fits machined cup with flat sides) $1.95 

WITH BALL 

BEARING 

SHEAVES 

Standard & Reduced 

Diameter for Base Cup 

G H I J K L M N 

G-N. STREAMLINED REDLINE EXTENSIONS 

STANDARD DIAMETER REDUCED DIAMETER (RDM) 

SHORT 

LONG 

SHORT 

LONG 

Overall length: 




47cm/18-1/2" 

65cm/25-1/2" 

45cm/18" 

65cm/25-1/2" 

G. 03-2626 $114.95 

6cm to 30cm range 

2-1/4" to 12" 

03-2626B $144.95 


2-1/4" to 12" 

K. 03-2926 $145.95 


2-1/4" to 12" 

03-2926B $175.95 


2-1/4" to 12" 

H. 03-2646 $135.95 


2-1/4" to 18" 

03-2646B $164.95 


2-1/4" to 18" 

L. 03-2946 $166.95 


2-1/4" to 18" 

03-2946B $196.95 


2-1/4" to 18" 

D-F. TWIST-ON SYSTEM 

It is adjustable without tools, always centered, and has a very 

low profile. The ultra thin base keeps the base cup as close to 

the deck as possible. 

D. 03-2222 Twist-On without Base Cup $54.00 

E. 03-2000 Twist-On with Base Cup $81.95 

F. 03-2099 Twist-On with Euro Pin $76.95 

03-0205 Twist-On Keyhole Plate $10.00 

03-0196 Insert - 8mm Heavy Duty Stainless Steel $1.50 

03-0197 Insert - T-Nut 8mm Brass $3.00 

BEWARE OF IMITATIONS! 

Streamlined tendons are the 

only ones that offer the quality, 

strength and reliability that go 

with the Streamlined name. 

I. 03-2826 $120.95 


2-3/4" to 12" 

03-2826B $149.95 


2-3/4" to 12" 

M. 03-2726 $120.95 


2-1/4" to 12" 

03-2726B $149.95 


2-1/4" to 12" 

Standard & Reduced 

Diameter for Euro Pin 

Latch system on 

Euro Pin models 

Latched 

Unlatched 

J. 03-2846 $141.95 


2-3/4" to 18" 

03-2846B $171.95 


2-3/4" to 18" 

N. 03-2746 $141.95 


2-1/4" to 18" 

03-2746B $171.95 


2-1/4" to 18" 

66 WINDSURFING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

E 

F

STREAMLINED “STRAP-ON” BOOM HEAD 

Streamlined's ground breaking innovation 

gives higher performance 

by providing a super positive 

boom-to-mast connection! The 

urethane bushings protect your 

carbon mast and boom and 

prevent slop. The Strap-On Boom 

Head is very easy to attach to the 

mast and it doesn't slip. Although 

the boom head weighs only 13.5 

oz. (Hawaiian Proline is 12 oz.; Fiberspar 

is 13 oz.), it is incredibly strong. It is constructed to last with a durable aluminum frame, stainless steel 

clamps and replaceable heavy duty webbing. The boom head is no longer the weakest link in the rig! 

For Standard Diameter Masts (Blue) 

03-4000-0 For Hawaiian Proline or Gulf Tech Boom 37mm $139.95 

03-4000-2 For Neil Pryde Boom 35mm $149.95 

03-4000-4 For Fiberspar Boom 39mm 

(minor modification) $149.95 

For Reduced Diameter Masts (Purple) 

03-4100-0 For Hawaiian Proline or Gulf Tech Boom 

37mm $139.95 

03-4100-2 For Neil Pryde Boom 35mm $149.95 

03-4100-4 For Fiberspar Boom 39mm 

(minor modification) $149.95 

Replacement Bushings for Boom Tube 

Urethane bushings cushion and isolate the boom head 

from the boom tube. These are replacements only, as 

bushings are included with strap-on boom head. Package 

of 4 is enough for one boom. 

03-0400 Bushings– For Hawaiian Proline or Gulf 

Tech Boom $16.00 

03-0402 Bushings– For Neil Pryde Boom $22.00 

03-0404 Bushings– For Fiberspar Boom $22.00 


03-0420 Replacement Strap $6.75 

03-0421 Stainless Clip for Boom Strap $8.95 

03-0419-0 Mast Bushing Kit– Std Diameter $45.00 

03-0419-1 Mast Bushing Kit– RDM $45.00 

Streamlined 

Team Rider 

Josh Angulo 

STREAMLINED BOOMS & ACCESSORIES 

STREAMLINED WINDOW 

STICKER 

3-1/2" x 5-1/2" sticker is grey and 

white on clear background and has 

adhesive back. 

03-8010 $1.50 

STREAMLINED GUARANTEE 

Streamlined Corporation takes pride in manufacturing in the U.S.A. under 

self-imposed stringent standards of quality, workmanship and materials. 

Streamlined Corporation guarantees its products to be manufactured with 

the finest materials and workmanship possible. Streamlined will repair or 

replace any of its products found to be defective in materials or workmanship 

for a period of 90 days. Universal joint parts will be inspected, 

repaired and/or replaced at no charge if returned to Streamlined postage 

prepaid within one year of purchase. 

Photo: Charles Oreve 

STREAMLINED 

TRUE PERFORMANCE BOOMS 

Streamlined’s pre-preg carbon fiber booms are excellent for surf sailing, jumping, freestyle, and all fun 

high wind sailing. A unique exaggerated straight section up to the front curve so the front hand can be 

powerfully and comfortably overhand and ergonomic. Nearly 100% high modulus prepreg carbon fiber, 

small diameter body with a super lightweight carbon tail piece, combine to make the stiffest, lightest, 

strongest boom possible. Each boom has a 50 cm range with settings every 2cm. Standard on the Josh 

Angulo Boom is Streamlined’s own “Strap-on” boom head and their thin and tough “Progrip” HTR 

(high tear resistant) grip. This boom, with its innovative curve, ultra light tail, rigid head and super easy 

grip/diameter, represents a whole new level of performance. All booms are also available with RDM boom 

heads; add the letter "R" to item number. 

JOSH ANGULO TRUE PERFORMANCE WAVE BOOMS 

03-4140 140 to 190cm – approx. 2.0 kg $979.95 

03-4155 155 to 205cm – approx. 2.1 kg $989.95 

03-4170 170 to 220cm – approx. 2.3 kg $999.95 

POWER GRAB TRUE PERFORMANCE SLALOM BOOMS 

Wider for speed and slalom. 

03-4175 175 to 225cm – approx. 2.3 kg $1349.95 

03-4195 195 to 245cm – approx. 2.4 kg $1369.95 

Downhauls & Tools .......................... pg 69 

More Universals & Accessories ...........68 

THE “ORIGINAL” SKINNY 

Handmade from the best designs using the best 

materials, this is the ultimate windsurfing mast. It 

is the lightest, strongest, most responsive mast you 

will ever own. The NoLimitz Skinny mast led the 

movement to smaller diameters in carbon masts and 

is the mast of choice for the sailor who wants the 

absolute lightest mast possible without sacrificing 

durability. Discover what insiders have known for over 

15 years: Nolimitz masts rule! Includes boom adapter. 

Ships by FedEx or UPS as an oversized item. 

RDM BOOM ADAPTER 

Necessary when using a standard 

boom on a reduced diameter mast. 

01-9504 $7.00 

NOLIMITZ MASTS 

NOLIMITZ SKINNY 2-PIECE MASTS 

MODEL LENGTH MCS IMCS CARBON WEIGHT ITEM 

NUMBER 

PRICE 

Skinny 2-piece 340 22 11 91% 3.25lb/1.50kg 57-523425 $425.00 

Skinny 2-piece 370 23 14.3 91% 3.43lb/1.56kg 57-523725 $425.00 





67

UNIVERSALS OUTHAULS & BOOM ACCESSORIES 

A 

C 

B 

D 

A-D. CHINOOK-STYLE FLEX JOINT 

A very heavy duty universal joint to replace 

original equipment. Oversized molded rubber. 

A. 01-9511 Joint $19.95 

B. 19-2210 8mm 1-1/8" Hex Bolt $1.80 

C. 19-2211 8 x 40mm Stud $2.00 

19-2212 8 x 50mm Stud $2.25 

D. 19-2522 8mm Nylock Nut $.60 

CHINOOK STRONG BOX 

8" fiber-filled, molded plastic deck box. 

03-3020 $10.50 

BASE CUP 

3/8" double push button. 

American standard heavy 

duty plastic base cup with 

brass insert has cover which 

prevents sand from jamming 

parts. 

03-0281 Base Cup $12.75 

03-0219 Double Push Button Only 

$3.50 

CHANNEL INSERTS 

03-0198 6mm Stainless $2.00 

03-0196 8mm Stainless Rectanglar $1.50 

03-0197 T-Nut Insert 8mm Brass $3.00 

STAINLESS RIVETS 

19-5031 CCP 6-4 3/16 x 1/4" $.70 

19-5032 CCP 6-6 3/16 x 3/8" $.75 

19-5033 CCP 6-8 3/16 x 1/2" $.75 

19-5021 CCC 6-4 3/16" x 1/4" 

Countersunk $.74 

Da Kine Wai Wai Pad ...................... pg 63 

Streamlined Masts & Booms ...............67 

Streamlined Universals ....................... 66 

E-H. 

ULTIMATE 

ADJUSTABLE 

OUTHAUL KIT 

Racers and recreational 

sailors can adjust outhaul tension 

“on the fly” for maximum 

power or speed. 

1. Low gear: Loosen outhaul tension 

to “power-up” to get going, even in 

light wind 

2. Shift to drive: Tighten outhaul to flatten sail for 

more speed as you get onto a plane and/or more 

efficiency when heading upwind. 

3. Adjust the outhaul (sail shape) from either side, at any 

time. Very low friction system helps you to make fine adjustments 

without disturbing your balance or position. 

4. With the optional triple outhaul pulley and double sail pulley system, you can tighten/flatten the sail, 

even while overpowered. 

5. The tailpiece of your boom must have a minimum of two roller sheaves. Add-on blocks can be installed 

if needed, or to increase purchase power. 

6. Kit includes 2 boom cleats, 2 Ronstan Orbit blocks, line (Dyneema 

G 

H 

® E 

and low stretch) and two ball end 

stops 

E. 01-9520 Adjustable Outhaul Kit $75.00 

F. 21-25109 Ronstan Orbit 20mm Bullet Block $11.95 

G. 

H. 

I. 

28-0404 

28-0416 

28-0408 

Harken 16mm Air Block $12.00 

Harken Cheek 16mm Air Block $13.90 

Harken 16mm Triple Air Block $35.25 

DOUBLE SAIL 

OUTHAUL PULLEY 

Fits in the clew grommet 

to dramatically reduce 

the friction of line running 

through the clew grommet. 

Two low-friction brass pulleys increase purchase 

power by reducing friction. Two halves screw 

together for easy installation. 

03-0177 $9.95 

CLAMCLEAT ® BOOM 

CLEAT & CLAMP 

Aluminum Clamcleat ® 

with plastic mount allows 

you to position a cleat 

anywhere on the boom. 

Use as part of adjustable 

outhaul systems. Complete with screws and a 

removable shim to accommodate virtually all 

boom sizes. Will fit boom circumferences of 

100-116mm and line sizes 1/8"-1/4". 

27-0244 $21.50 

MAST PROTECTOR 

Spread the load over a broad 

section of mast. 5" aluminum 

protector is for tight-fitting 

boom ends. May be required to 

uphold mast warranty. 

01-9503 $5.00 

UPHAULS 

EASY UPHAUL 

Join everyone on the U.S. Sailing 

Team and uphaul with a smile. 

Take it easy on your back. 

Everybody who tries this uphaul 

loves it, even beginners. 

01-9100 $39.95 

PROGRIP 

UV-resistant, tough, yet soft and lightweight 

closed-cell foam grip works best when wet. Thin 

2mm reduces the overall diameter for comfort. 

Easy two-step installation using contact cement. 

4-1/2"-wide Progrip is sold by the foot. 

Sorry, black is no longer available. 

00-9901-03 By the Foot Powder Blue 


ADHESIVE 

Use fast-drying 

contact cement for flat grip. 

30-2011 Contact Cement 

1/2 pt. $11.95 

30-2020 Brush 1" $1.00 

DA KINE UPHAUL 

No rig is complete without an uphaul. This version is durable, tubular nylon webbing with internal shock 

cord. The upper portion lies flat 

against the mast and either 

the uphaul or mast can 

be grabbed to regain 

balance. 52". Black or 

white as available. 

32-1222 $12.00 

68 WINDSURFING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

F 

DA KINE POWER UPHAUL 

Da Kine's Power Uphaul 

has an internal bungee 

system that holds tight 

to the mast. Oversized 

EVA grips are easy to 

grab and comfortable 

for uphauling. 

32-1224 $16.00 

I

CHINOOK RIG WINCH 

Launch sooner and sail longer 

with this portable downhaul 

crank! It is ultra-powerful, so it’s 

easy to precisely tune sails and 

cleat the downhaul line in exactly 

the right position. Includes a 

pin for compatibility with Euro 

pin systems and a built-in base 

cup that fits most base cup 

systems except newer 

Streamlined. 

03-4002 $48.00 

F 

G 

G 

I 

E 

C 

H 

A 4:1 system can be made by using a #28-0405 and #28-0406. 

A 

A-J. RACE BOARD DOWNHAUL 

Shown are examples of adjustable downhaul systems for race boards. Build your own system by 

choosing the appropriate parts from the photo above. 

A 28-0404 Harken 16mm Single Air 

Block $12.00 

B. 28-0405 Harken 16mm Single Air Block 

with Becket $13.75 

C. 28-0406 Harken 16mm Double Air Block 

$25.00 

D. 28-0407 Harken 16mm Double Air Block 

with Becket $27.30 

E. 28-0416 Harken 16mm Cheek Air 

Block $13.90 

F. 28-0417 Harken 16mm Single with 

Swivel $21.60 

FIN ACCESSORIES 

CHANNEL INSERTS 

Carry a spare! 6mm is replacement for European 

insert. 

03-0190 10-32 Stainless $2.00 

03-0198 6mm Stainless $2.00 

19-2912 Machine Screw #10-32 x 3/4" 

Slot Pan Head $.34 

J 

3:1 Purchase Power 

5:1 Purchase Power 

G. 27-0253 Aluminum Clamcleat with 

Roller $25.60 

H. 21-0615 5/32" D Shackle with Screw 

Pin $4.60 

I. 39-2310BK 5/32" Low-Stretch 8-Strand 

Braid– per ft. $.34 

J. 39-2329 Dyneema 12-Strand Gray 3mm 

per ft. $.50 

J. 39-1309 Robline Downhaul Line 3.8mm 

per ft. $1.20 

SKEG SAVER 

Patented fin protection 

system. Breakable plastic 

slide is used to replace the 

metal slide on adjustable 

fin boxes. Greatly reduces or eliminates 

costly damage from fin contact with underwater 

obstructions. Will not pre-release. 

43-3007 $6.95 

B 

D 

DOWNHAULS & TOOLS 

EASY RIGG 

Downhaul tool, halyard 

tensioner and shackle 

tool. Metal teeth 

grip 3/32"-3/16" 

line diameters. Easy 

to grip and pull. Assorted colors prevent loss. 

Display: 25/case. 

01-0010 $9.50 

POWER GRIP II BY CLAMCLEAT ® 

The CL262 Power Grip 2 is for two-handed use 

where even more pulling power and control are 

required. It is light, strong and convenient to 

carry in your pocket. The anodized aluminum 

tool grips 3/32"-1/4" diameter lines. 

27-0262 $28.50 

POWER GRIP I BY CLAMCLEAT ® 

The CL261 Power Grip 1 is for single-handed use. 

It allows you to pull twice the load compared to 

using your bare hand and is equally suitable for 

right- or left-handed use. Line pulls from center 

of tool. The anodized aluminum tool features 

two sets of grip cleats to grip 1/8"-1/4" diameter 

lines. 3-3/4" long. 

27-0261 $16.95 

3- AND 4-ROLLER HOOKS 

All-metal blocks feature cast aluminum hook and 

body with stainless steel rollers and shaft. Strong! 

27-5628 3-Roller Hook $14.50 

27-5729 4-Roller Hook $15.50 

Photo courtesy of Streamlined Rider: Philip Soltysiak Photo: Anna Perrson 


69

KITEBOARDING HARNESSES 

DA KINE KITEBOARDING HARNESSES 

Da Kine's innovative designs result from their over 20-year 

history of product development, on-the-water experience, 

and input from their extensive group of team riders. 

INDEPENDENT POWER BELT 

The Independent Power Belt incorporates an elasticized 

primary belt for increased comfort and performance. This 

belt provides total closure security, as well as back and side 

support, giving the sailor a positive harness positioning. 

DA KINE NITROUS SHORTS 

Kite/Windsurf Crossover 

Da Kine’s Nitrous integrates years of harness development 

and technology with the styling and comfort of boardshorts. 

The kite/windsurf crossover Nitrous has an 8-point load 

dispersion system to keep you comfortable. Constructed 

of lightweight, quick-dry fabric, it features Da Kine’s 

PowerClip buckle system, an ultra-comfortable, internal 

leg strap, grab handle, stainless steel leash attachment 

rings, and a side pocket. An adjustable waist buckle and 

zipper ensure comfortable, secure fastening. Assorted 

colors as available. Order spreader separately. 

$120.00 

32-1146-28 28" Waist 

32-1146-30 30" Waist 

32-1146-32 32" Waist 

32-1146-34 34" Waist 

32-1146-36 36" Waist 

HOOK KNIFE WITH HANDLE 

Da Kine's anodized 

aluminum knife 

has a stainless steel 

“protected” blade for 

cutting lines in an 

emergency. Webbing 

sleeve for easy 

mounting. 

32-1040 $8.00 

Nitrous and Starlet shorts have an 

adjustable waist buckle and zipper 

DA KINE WOMEN'S STARLET SHORTS 


This women-specific, supportive seat harness provides 

great fit without the bulk. Features: adjustable hook 

height; Power Clip buckle system; 8-point load dispersion 

system; ultra-comfortable, internal leg straps; 

adjustable waist buckle and zipper; stainless steel 

leash attachment rings; and removable grab handle. 


$120.00 

32-1080 Size 6 

32-1081 Size 8 

32-1082 Size 10 

32-1083 Size 12 

QUICK RELEASE POWER CLIP BUCKLE 

Dual stainless 

system connects 

instantly 

and securely 

to both ends 

of the spreader 

bar. Webbing 

then connects 

to the Quick Release (and not the bar ends), 

making for ultra-smooth adjustment and 

greatly reduced bar roll. System works equally 

well for right or left handed entry and release. 

32-1028 Replacement Power Clip- 

Buckle– Pair $30.00 

Da Kine Solo Bag .....................................65 

Harness Lines ........................................... 72 

Kite Bars ......................................................72 

Impact Vests ..............................................77 

POSI-LOCK BUCKLE SYSTEM 

The revolutionary Posi-Lock Buckle System offers 

a non-slip, unbreakable closure system. Made of 

corrosion-resistant stainless steel. 

DUAL POSI-LOCK 

Same as above, but Dual Posi-Lock allows 

for the replacement and readjustment of the 

spreader bar webbing without having to send 

the harness in for repair. 

DA KINE PYRO WAIST HARNESS 

Da Kine has created the best-fitting waist harness ever by completely 

redesigning the Pyro using their unique multiple-panel outer 

shell. The inner is specifically designed to give lumbar 

support and comfort with or without a wetsuit. The 

Pyro features a four-part outer design to provide 

maximum flexibility and support, dual density inner, 

sliding spreader bar, riveted equalizer patches for 

added strength, independent primary and secondary 

Power Belt, integrated handle and leash attachment, 

and Power Clip buckle system. Order spreader 

separately. 

$170.00 

32-1191 X-Small 

32-1192 Small 


32-1194 Large 

32-1195 X-Large 

Dual Density Inner 

DA KINE RENEGADE KITE WAIST HARNESS 

New for 2009, Da Kine’s Renegade waist harness features a 

pre-curved inner support structure, compression 

molded lumbar pad and independent primary 

and secondary Power Belt for comfort and 

support. The Renegade utilizes Da Kine’s 

Power Clip buckle system. It has nice finishing 

touches, including an integrated handle 

and leash attachment, buckle covers, and 

two side key/knife pockets with elastic key 

loop. Assorted colors as available. Knife and 

spreader are sold separately. 

$110.00 

32-1051 Small 


32-1053 Large 

32-1054 X-Large 

WOMEN'S WAHINE WAIST HARNESS BY DA KINE 

The Wahine’s outline shape was designed with the 

unique demands of female windsurfers and kiters 

in mind. It provides superior support and flexibility 

with a comfortable fit. Features: anatomical 3-D 

shape; internal load dispersion system; single 

overlap Power Belt system; independent primary 

and one secondary Power Belt; PowerClip buckle 

system; stainless steel leash attachment rings; and 

grab handle. Order spreader separately. 

$99.00 

32-1061 Small 


32-1063 Large 

COLORS 

Color selection varies and colors 

shown may not always be available. 

Please call for current color 

selection. 

DA KINE SIZING 

Harness Size Waist Size 

XS 28" (71 cm) 

S 30" (76 cm) 

M 32" (81 cm) 

L 34" (86 cm) 

XL 36"-38" (91 cm) 

Not all sizes are available in all styles. 

Nitrous harnesses are sold by waist size. 

70 KITEBOARDING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change

DA KINE SONIC WAIST/SEAT 


The Sonic is a combination waist and seat 

harness without leg straps and is designed for 

both kiteboarding and windsurfing use. It has a 

compression molded lumbar panel, pre-curved PEB 

inner support structure, independent primary and 

secondary Power Belt, and stainless steel leash attachment 

rings. Features Power Clip buckle system 

and adjustable spreader bar height. Order spreader 

separately. 

$120.00 

32-1151 Small 


32-1153 Large 

32-1154 X-Large 

DA KINE STORM KITE SEAT 

Da Kine’s Storm Seat offers a low-profile fit and 

adjustable hook height. Also features: Powerbelt 

system; 8-point load dispersion system; 

ultra-comfortable leg straps; stainless steel 

leash attachment rings; and integrated 

grab handle. PowerClip buckle system. 


$105.00 

32-1085-1 Small 

32-1085-2 Medium 

32-1085-3 Large 

32-1085-4 X-Large 

DA KINE WOMEN'S TEMPEST SEAT 


This women-specific harness is loaded with 

features. It offers a low-profile fit with 

adjustable hook height and contoured 

shaping panels that comfortably form the 

harness to your body. Features: adjustable 

hook height; Powerbelt system; PowerClip 

buckle system; 8-point load dispersion 

system; ultra-comfortable leg straps; stainless 

steel leash attachment rings; and integrated 

grab handle. Order spreader separately. 

$85.00 

32-1071 Small 


32-1073 Large 

DA KINE FUSION SEAT HARNESS 

Da Kine’s Fusion provides the ultimate combination 

of back support, mobility and comfort for 

the all-around kiteboarder. This seat harness 

features compression molded back and side 

panels, molded lumbar support, internal batten 

support, plus an 8-point load dispersion system 

to prevent point loading, and PowerClip buckle 

system. Other features include: independent 

primary and secondary Power Belt for a snug fit; 

ultra-comfortable leg straps; adjustable spreader 

bar height; stainless steel leash attachment rings; 

and integrated grab handle. Order spreader 

separately. 

$150.00 

32-1181 X-Small 

32-1182 Small 


32-1184 Large 

32-1185 X-Large 

KITE SPREADERS & PADS 

DA KINE KINGPIN 

SPREADER BAR 

Quickly connect and disconnect! Da Kine’s 10” 

stainless steel Kingpin design is overbuilt for 

undeniable strength. Horizontal pull keeps the 

bar down. Compatible with all 2008 Da Kine 

“Power Clip” harnesses. 

01-0180 10" $45.00 

DA KINE HAMMERHEAD 

KITE SPREADER BAR 

Da Kine’s spreader features a unique hammerhead, 

kite-specific design, with a new shorter 

hook for better control and a new crossbar 

for hold-down webbing strap. Constructed of 

marine-grade non-corrosive stainless steel. 

01-0157 6" $23.00 

01-0158 10" $23.00 

01-0159 12" $23.00 

DA KINE SPREADER BAR PAD 

Da Kine’s spreader bar pad is compatible with 

all Da Kine harnesses. Its 3/4” (10mm) padding 

protects ribs and the pad helps prevent bar lift. A 

centered pocket gives quick access to your knife 

(sold separately). 

32-1035 6" $22.00 

32-1037 10" $22.00 

32-1039 12" $22.00 

DA KINE PIVOTING 

HAMMERHEAD KITE 

SPREADER BAR 

The Pivoting Hammerhead was designed specifically 

for kite use and features an articulating 

hook that reduces pressure on bar ends. Stainless 

steel construction. 

01-0160 10" $28.00 

Rider: Wes Matweyew Photo: Jason Wolcott 

Prices & specifications are subject to change www.murrays.com 800-786-7245 KITEBOARDING ACCESSORIES 

71

CHICKEN LOOPS & SHEETING SYSTEMS 

CABRINHA SWITCHBLADE 

CHICKEN LOOP 

Swiveling chicken loop for Cabrinha Switchblade 

kites. 

54-2216 21cm $24.50 

54-2217 23cm $24.50 

CABRINHA 23CM IDS CHICKEN LOOP 

Replacement Cabrinha IDS harness loop is the smallest size 

available and is compatible with all 2009 IDS kites. 

54-2215 $32.00 

DETACHABLE CHICKEN BONE 

Keep your chicken loop from releasing from your 

spreader bar. Detachable chicken bone can be 

mounted to your spreader bar or to the chicken 

loop itself. 

54-8014 $7.50 

AIRUSH KNOTLESS 

SHEETING SYSTEM 

The Knotless Sheeting System gives 

a clean and knotless leader-to-bar 

connection and provides a broad 

range for depowering any type of 

4-line kite. Attaches to the chicken 

loop with a half hitch. 

54-8023 $20.00 

Kite Harnesses ............................ pg 70-71 

Kite Lines .................................................. 75 

Leashes ........................................................77 

Sheeting Accessories .............................73 

AIRUSH 

MONO 

SHEETING 

SYSTEM 

This system attaches to 

the middle of the kite 

bar with a double webbing 

loop, allowing the 

use of a mono or swivel 

harness line. The Mono 

System is for flyers 

who want 4-line 

adjustability without 

an Air Loop 

(or chicken loop) 

setup, and prefer to use a 

mono or swivel line (with 

one attachment point) on 

the bar. For use with Mono 

Swivel Harness Lines. 

54-8021 $20.00 

Rider: Eric Marchand 


KITE TRIM 

CLEAT 

Clamcleat ® aluminum 

rope cleat with a hardanodized 

coating that wears 

better than non-anodized when 

used with sandy line. Bottom 

roller. Rope size: 3/16" - 5/16" 

(4-8mm). Length: 3-1/2". 

27-0253A $26.95 

KITE BLOCK 

Ronstan's little block 

has twice the working 

load of their previous 

kite block (black RF668) with half the weight. 

Replace older, heavier blocks now! 300# SWL; 

sheave diameter 5/8"; max. line size 5/32". Pair. 

21-13101 $11.00 

A 

A-B. HARKEN CARBO AIR BLOCKS 

Convert your carbon kite bar into a pulley bar. 

Use three feet of 5 or 6mm Dyneema line (#39- 

2331 or 39-2332) to attach the block to the bar 

ends. 29mm has 1-1/8" sheave diameter; 40mm 

has 1-9/16". 

A. 28- 0351 29mm $19.15 

B. 28-2650 40mm $21.60 

STAINLESS RING 

Welded stainless steel ring 

is used with wrist release 

assembly. 

22-3320 1/8" x 3/4" ID $2.25 

22-3525 3/16" x 3/4" ID $2.75 

Rider: Wes Matweyew Photo: Jason Wolcott 

B 

KITE SHEETING ITEMS 

RONSTAN MICRO PULLEY 

Upgrade bow and flat kite bridle pulleys with 

Ronstan's micro pulleys to extend the 

life of your bridles and increase the 

working strength. 3/4" sheave 

diameter with 1/4" max. line size. 

550 lb. max. working load; 1210 

lb. breaking load. Each. 

21-2011 $11.75 

RONSTAN EYE & EYE SWIVEL 

This little ball-bearing swivel can easily convert 

your regular chicken loop into a hefty swiveling 

chicken loop. Marine grade 316 stainless hardware 

is rated to 2200 lbs. of breaking strength. 

2.5" long, 2.3oz. 

21-0078 $63.65 

SNAP SHACKLE 

WITH SWIVEL EYE 

2-3/4" long stainless 

steel shackle has 1/2" 

diameter eye. SWL 1000 

lbs. Weighs 2.4 oz. 

22-4521 $36.00 

SNAP SHACKLE 

WITH TACK 

Stainless steel shackle 

is 2-3/4" with 1/4" pin 

diameter. SWL 800 lbs. 

Weighs 2.4 oz. 

22-4501 $39.00 

BARREL BEADS & BALLS 

For up to 3/16" line. 

21-1316 1" $1.60 

21-1317 3/4" $1.40 

21-1318 5/8" $1.25 

54-8095 Airush Half-Moon Ball– (5/32" line 

max.) each $2.00 

AIRUSH 

KNOTLESS 

BALL 

Movable, positive line 

stop on leader line. Position 

ball stop so that the kite bar travels out 

line just far enough to permit kite to completely 

depower. For 3/32", 7/64" and 1/8" line. Package 

of 6. 

54-8094 $6.00 

SHACKLES 

CHOOSING THE RIGHT SHACKLE 

When available, the manufacturer’s load rating (SWL=Safe Working Load) is indicated. Regardless 

of the type of load rating, all factors regarding your specific use and conditions must be considered 

when choosing and using a shackle. Your body weight is only a start in calculating the shackle 

strength necessary. In addition, always figure in a factor of safety! 

For attachment to your harness, snap shackles are best fitted with a barrel bead on a short line 

attached to the release ring for increased pull and ease of reach. Since a kite leash shackle is the 

last resort to completely release the kite, make safety a priority and choose a quality shackle that 

releases well under tension. Make sure you can reach your shackle by attaching it to the front of 

your harness or having it on a lanyard from the back, but so it can be reached from the front and 

you can see it. 

Because the shackle attached to your kite will be flying, choosing a shackle that is light in weight is 

important. A quick and/or easy attachment to the kite is strictly for convenience. 

TRIGGER SNAP SHACKLE 

WITH SWIVEL 

Heavy duty swiveling stainless 

shackle has an overall 

length of 2-11/16". 

Weighs 2 oz. SWL 

unspecified. 

27-146048 $8.95 

TRIGGER SNAP 

Lightweight, die-cast, manganese 

bronze swiveling shackle with 

overall length of 2-9/16". 

Weighs 1.5 oz. SWL 

unspecified. 

27-136800 $9.50 


73

TRAINER KITES & REPAIR BLADDERS & PUMPS 

SENSEI RELAUNCHABLE TRAINER KITE PACKAGES 

This is the first ever two-line relaunchable trainer 

kite and it is the most stable and smooth 

trainer out there! Just pull on one line and the 

Sensei trainer kite pops off the ground and 

easily relaunches.The kite has self-cleaning 

vents, so any sand that gets in it will automatically 

be dumped out. Complete with bag, bar 

and lines ready to fly. 

54-4402 2m Trainer Kite Package $134.00 


HQ TRAINER KITE PACKAGES 

HQ’s trainer kites feature sewn-in line 

attachment tabs to increase durability, 

longevity and breaking strength. The 2m 

package includes 65 feet of 320-lb. test 

Dyneema lines; the 3m package has 80 feet 

of 385-lb. test. Both packages come with a 50cm 

bar. Lines are pre-attached to the kite for immediate use. The included triangleshaped 

backpack helps protect your kite during transport and storage. Instruction 

manual included. Red, yellow or blue as available. 



TEAR-AID KITE REPAIR KITS 

The best known kite bladder and canopy repair 

kit we're aware of. Each package includes one 

foot of clear repair tape, alcohol pad and instructions. 

To use, clean area to be repaired with 

alcohol, cut patch to size, then peel and stick. 

10-3310 Kite Canopy (A)– 2.5" wide $5.95 

10-3300 Vinyl Bladder (B)– 1.25x12" $3.25 

10-3301 Vinyl Bladder (B)– 2.5x12" $5.95 

SAIL/KITE REPAIR TAPE 

Cut the needed amount off the 25-foot, 2"-wide 

roll and keep the rest handy for emergencies. 

The 3/4-oz. ripstop nylon is self-adhesive and 

easy to apply. 

$10.95 

10-3400 White 

10-3400-1 Black 

10-3400-2 Light Blue 

10-3400-3 Red 

Handy backpack 

included 

SLINGSHOT TRAINER KITES 

Slingshot’s B2 trainer kite is a recreational foil kite for snow and land. It is Slingshot’s original 2-line 

foil trainer kite and has a proven reputation as the best trainer kite ever produced. The B2 is easy to fly 

and is durable, forgiving and gives users an edge in basic flying skills. The B2 package includes: B2 kite, 

lightweight aluminum control bar, compact storage bag, 

flying lines and user DVD. 

The B3 is Slingshot’s original 2-line foil light 

traction trainer kite. It is hands down one of the 

best light traction kites on the market. The B3 is 

durable and has the right amount of pull to get you 

going. The B3 package includes: B3 kite, lightweight 

aluminum control bar, foam padded, with flying lines pre-wrapped for easy set-up, compact storage bag, 

B safety wrist cuff, bungee with stainless steel clip and stainless steel ring, compact storage bag, flying 

lines and user DVD. 

54-6201 B2 Trainer Kite $119.00 

54-6202 B3 Lite Traction Package $219.00 

10-3400-4 Hot Pink 

10-3400-6 Gold 

10-3400-7 Green 

10-3400-8 Dark Blue 

10-3400-9 Silver 

FULL-SIZE KITES & BOARDS ARE 

ALSO AVAILABLE! 

Ask us about our selection of kites and boards 

in stock or available by special order from 

Cabrinha, Slingshot, Airush, Lite Wave, Ocean 

Rodeo, Liquid Force and others. Call 800-786- 

7245 or e-mail us at info@murrays.com. 

HQ GROUND STAKE 

HQ’s ground stake will hold chicken loop to enable 

unassisted kite launching. Metal rod has an 

orange handle that is easy to spot. Handy black 

sheath is included. 

54-3501 $7.99 

The best combination of two kite 

bladders is one for your largest 

leading edge and one for your 

largest strut. These two bladders 

will work in your smaller kites as 

well. Talcum powder should be 

used when inserting bladders. 

61-6001 Talc $5.95 

KITEFIX MONSTER 

BLADDER PATCH 

Big blow out on your 

kite’s leading edge? Why 

replace the entire bladder 

when you can fix it 

at a fraction of the cost? 

This extra-large 9” x 12” 

flexible, ultra-adhesive 

peel-and-stick patch can repair leading edge 

bladder holes up to 7” x 10” in size. 

54-7203 $19.99 

ONE-PUMP LE VALVE KIT 

Includes 5 option valves, 5 “L” Cabrinha connectors, 

and 5 “I” connectors compatible with 

Slingshot, GK and Flexifoil kites. A great kit when 

installing multiple new bladders in kites with 

single point inflation systems. 

61-6204 $20.00 

KITE PUMP PRESSURE GAUGE 

Don’t over-inflate! Accurately 

measure 

kite bladder 

pressure with 

this pressure 

gauge. Compatible 

with most 

standard kite pumps. 

54-6296 $15.00 

AIRTIME REPLACEMENT BLADDERS 

LE (LEADING EDGE) BLADDERS 

Size U-Stick Orange U-Stick Yellow 

(Closeout Prices; Limited Stock) 

C-D. KITE PUMPS 

These two-way pumps 

inflate much faster than 

smaller pumps. Both have 

metal shafts for durability and include a 

pressure gauge to inflate your kite to the correct 

pressure. 

C. 54-6299 Double-Action Pump 1.4L 

$35.00 

D. 54-6300 Double-Action Pump 2.0L with 

Gauge $39.95 

74 KITEBOARDING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

D 

Standard Yellow 

(9mm 2-Way Valve Installed) 

25’ — 61-6225 $50.00 — 

28’ 61-6028-1 $47.00 61-6228 $55.00 — 

32’ 61-6032-1 $48.00 61-6232 $60.00 — 

35’ 61-6035-1 $49.00 — 61-6035 $60.00 

35’ Cabrinha — 61-6235C $65.00 — 

37’ 61-6037-1 $50.00 61-6237 $70.00 — 

40’ 61-6040-1 $51.00 61-6240 $75.00 61-6040 $64.00 

43’ 61-6043-1 $52.00 — 61-6043 $65.00 

46’ Special Order 61-6246 $80.00 — 

STRUT BLADDERS 

Size U-Stick Orange U-Stick Yellow 

(Sorry… Sold Out) 

Standard Yellow 

(9mm 2-Way Valve Installed) 

30” 61-6253 $15.00 — 61-6127 (27.5”) $15.00 

40” 61-6254 $17.00 — 61-6136 (36”) $16.00 

50” 61-6255 $19.00 — — 

60” 61-6256 $21.00 — — 

70” 61-6257 $23.00 — — 

80” 61-6258 $25.00 — — 

90” 61-6259 $27.00 — — 

100” Special Order — — 

VALVES 

Orange has oc 

Size U-Stick Orange 

(For Orange Bladders) 

U-Stick Yellow 

(For Yellow Bladders) 

Fix Kit Yellow 

(Replacement Valve) 

9mm 61-6210 $15.00 61-6201-1 $10.00 61-6208 $15.00 

11mm 61-6211 $15.00 61-6202 $10.00 61-6209 $15.00 

Option 61-6212 $15.00 61-6207 $10.00 61-6206 $15.00 

Cabrinha 

Screw Valve 

61-6213 $15.00 — — 

C

DYNEEMA SK75 12-STRAND 

BRAIDED PRE-LINES 

With almost no stretch and a urethane coating 

for extra abrasion resistance. It's easy to splice 

and there is no need to sleeve. 7/64" may be 

used as leader lines; 1/4" makes a good chicken 

loop line. Gray. Sold per foot. 

39-2329 3mm Gray $.50/ft 

39-2329BL 3mm Blue $.50/ft 

39-2329RD 3mm Red $.50/ft 

39-2331 5mm Gray $.92/ft 

39-2331BL 5mm Blue $.92/ft 

39-2332 6mm Gray $1.40/ft 

SLINGSHOT PIGTAILS 

Replacement pigtails with foolproof connections 

help prevent wear and tear on your lark's heads. 

Easy to pull off, saving teeth and nails. Set of 4. 

54-6013 Kite $15.00 

54-6014 Line/Bar (shown) $15.00 

PROKITESURF PIGTAIL SET 

This pigtail set is a complete 8-piece set, set up 

in kook-proof fashion with different colors for 

inside and outside lines, and pre-set knots and 

pull-tabs for ease of use. 

54-4408 $23.95 

HOOK KNIFE WITH HANDLE 

Da Kine's anodized aluminum 

knife has a 

stainless steel 

“protected” 

blade for cutting lines in 

an emergency. 

32-1040 $8.00 

PROKITESURF LINE SET 

Four equal-length, 650 lb. load bearing white 

Spectra lines feature 1 white, 1 red and 2 gray 

kook-proof larks head loops. 

54-4409 4 x 25m $125.00 

54-4410 4 x 27m $129.00 

HQ LINE SETS 

HQ’s economical line sets have four lengths of 

kook-proof colored 600-pound line on a plastic 

winder. 

54-3502 600# 4 x 22m Colored $114.99 

54-3503 600 # 4 x 25m Colored $124.99 

CREATE AND CUSTOMIZE YOUR 

OWN Q-LINE KITE LINES 

Note: Only Q-Line and Q-Line Pro do not need 

sheathed loop ends. 

1. Decide what length line you want. 

2. Measure and cut 4 lengths of line about a 

foot longer than the line length desired. 

3. Tie an overhand knot onto the end of each 

of your lines to create your larks heads. 

4. Attach all the larks heads to a nail so that 

all lines will be the same length. 

5. Walk your lines to the desired length. 

6. Mark your lines with a pen at the exact 

length you want. Make sure to have about 

4 inches of extra line beyond the mark to 

tie your knot. Center the pen mark in the 

knot. 

7. Pigtails can be used to color code your attachment 

points and reduce wear on your 

larks heads. 

LINE LENGTH TIPS 

Change the size of your kite with the length of your kite lines. 

Shorter lines effectively reduce the size of your kite and increase the kite's responsiveness. 

As a general rule, 3 meters of kite line = 1 meter of kite. 

For example: 

10 meter kite + 25 meter lines = 9 meter kite 



5-10 meter lines allow you to fly your full-size kite as a trainer. 

15-25 meter lines are recomended for wave riding. 

30+ meter lines are recommended only for advanced kiters. 

Tie a double overhand knot on each end of the line. 

This information and more valuable tips are found in Secrets of Kiteboarding. 

Double 

Overhand Knot 

A. Q-LEADERLINE 75' 

These “extension” lines for your kite bar use a 

linear Spectra fiber core just like the Q-Power- 

Line. However, they have an overbraid which is 

made from encapsulated Spectra fiber, 

providing protection for both the rider and the 

line. Highly visible black and yellow overbraid. 

1500 lb. (680 kg), 75 ft (23 m) spool. 

61-0223 $67.00 

B. Q-POWERLINE PRO 

The latest advancement in kitesurfing line 

technology, with a thinner, stronger Spectra 

fiber to further improve the time-proven features 

of Q-PowerLine. Pro is now 30% thinner than 

standard Q-PowerLine for even lower drag. It 

is more stretch-resistant, with stronger impact 

strength, a smoother “hand” to make it much 

more kink-resistant, and it features a new surface 

treatment for a more slippery finish, allowing 

more wraps without binding. It has 10 times 

the resistance to tangles, a tight overbraid to 

keep out damaging sand particles, a linear core 

for the lowest stretch possible, much longer life 

than braided lines, no requirement for sleeving, a 

round cross-section for lower drag than “thinner” 

flat braided lines, high-visibility safety coating, 

and 100% pure Spectra construction for flotation. 

Bulk spools. Limited to stock on hand. 

61-0276-3 Q-Pro 600# 500 ft (152m) 

Orange $169.00 

KITE LINES 

C. Q-POWERLINE BULK LINE 

Q-PowerLine represents over 5 years of research 

and development to engineer the ultimate line 

specifically for traction kiting applications. The 

unique cored construction utilizes continuous 

linear strands of very high tenacity Spectra 2000 ® 

fiber encased in an extremely tight braided 

Spectra 2000 ® sheath. The resulting line exhibits 

the ideal characteristics for traction kiting: almost 

zero stretch means minimal length adjustments 

and incredible kite “feel” when flying; no 

required sleeving makes it easy to produce 

your own custom sets; self-lubrication ensures 

minimal friction during line wraps; a round 

cross-section minimizes parasitic wind-drag, 

increasing both the kite's forward speed and 

response to pilot input; a tight external braid 

reduces dirt abrasion; and a higher modulus 

(stiffness) than traditional lines almost totally 

eliminates line tendency to tangle. Proprietary 

coating technology allows production of 

hi-visibility safety lines in fluorescent yellow 

and orange with even coatings that resist the 

tendency to fade and rub off. 

61-0235-3 300# 1000 ft OR 


61-0266-1 600# 500 ft WH $120.00 

61-0266-2 600# 500 ft YL $120.00 

61-0266-3 600# 500 ft OR $120.00 

When cutting line, apply super glue to 

line and let dry BEFORE cutting. This is a 

good trick for keeping cuts neat. 


A 

B 

C 

Photo courtesy of HQ Kites 

75

KITEBOARD FOOTSTRAPS & PADS 

A 

X-LACE KITE FOOTSTRAPS 

With the X-Lace's on-the-fly micro-adjustability, 

strap size can be easily fine tuned for the ultimate 

in control and performance. The single side entry 

straps are constructed of molded dual-density foam 

with a pre-formed arch that prevents collapsing. 

Lace-up tensioners form to your foot. Pair. 

32-1320 $50.00 

X-LACE WAVE FOOTSTRAPS 

The X-Lace Wave footstraps have an asymmetrical 

shape for ultimate control. Their dual side entry is 

perfect for surfboards. Constructed of molded dual 

density foam. Lace-up tensioners form to your foot 

and pre-formed arch prevents collapsing. Pair. 

32-1322 $50.00 

CONTROL STANDARD FOOTSTRAPS 

With comfort and maneuverability in mind, these 

single-side-entry straps feature an anatomical 3-D 

shape and an extra-wide design which spreads 

pressure over the entire foot. They feature internal 

hook and loop adjustment and single or double 

insert compatibility. Pair. 

32-1350 $60.00 

CRIMINAL ADJUSTABLE FOOTSTRAPS 

Criminal adjustable footstraps offer a wide strap 

adjustment range with an external Velcro® strap for 

easy adjustment. Asymmetrical design for added 

support and comfort. Pair. 

54-4421 $46.00 

NSI PROTON ADJUSTABLE KITE STRAP 

NSI’s original kite specific dual-entry footstrap has 

morphed into the Proton Kite Strap. The design 

offers all the comfort of the original Adam footstrap, 

with added convenience of NSI’s unique cam buckle 

adjustment system for fast and easy customized 

size adjustment. Super lightweight performance, 

with a large adjustment range and easy “on the fly” 

adjustment. Pair. 

54-9054 $52.00 

NSI RATCHET FOOSTRAPS 

With an integrated ladder strap and ratcheting 

buckle, this dual-entry footstrap has a huge range 

of adjustment and the ability to completely cement 

your feet to your board. Black. Pair. 

54-9055 $55.90 

A-B. CABRINHA SYNC FOOTSTRAPS 

The Sync delivers the type of support you’d expect 

from a binding with the ease of use of a footstrap. 

Its lightweight, backless binding strap, wide 

Dyneema laces, and neoprene inner give a positive 

connection between rider 

and board for control and 

comfort. Easy attachment 

with ±12° of angle 

adjustment. Pair. 

B 

A. 54-2200 Footstraps $48.00 

B. 54-2219 Backless Bindings with Footpad 

$119.00 

DA KINE BOOST DECKPADS 

Da Kine's Boost deckpads are molded of a shock 

absorbing, dual-density compound for soft landings. 

A directional traction pattern and built-in arch support 

provide comfort and maximum grip. Mounting plate for 

easy installation. Pair. 

32-1354 $50.00 

NSI SURFACE MOUNT 

FOOTSTRAP INSERTS 

Set of four footstrap insert plates with specially 

formulated 3M® peel-and-stick adhesive for use 

on surface of surfboards. Includes screws. 

54-9064 $39.95 

C. NSI SURF 'N SKIM PADZ 

Put footstraps on any surf or skim board using these pads with built-in threaded footstrap inserts. Peel 

and stick installation using specially formulated 3M adhesives. No need to drill into your board! Remove 

the straps for strapless kiting or surfing; screw them back on for strapped kiting or tow-in surfing. Sold as 

a set (front and rear). 

54-9065 $106.95 

D. NSI SURF PAD SYSTEM 

The Surf Pad System is comprised of multi-piece rear and front pads. Both front and rear pads feature a 

center section with two sets of inserts in a 2x4 pattern that will cover most any footstrap position desired. 

The 5-piece rear pad set has a kick tail and soft arch bar, while the 7-piece front pad set is flat between 

the inserts and covers a larger area of the board for improved strapless riding and jibing. The pads are 

made of multiple pieces so the layout can be optimized for a wide range of boards and riders. Beveled 

edges release water and eliminate peel. Installation is easy and each pad mounts individually. 

54-9066 $121.95 

76 KITEBOARDING ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change 

C 

NSI SUPER SURF 

KITEBOARD PADZ 

Full size surfboard deck Padz with easy 

peel-and-stick installation. Waffle traction in 

assorted colors as available. 34" x 15". 

54-9108 Single Density $46.95 

54-9108-1 Dual Density $53.95 

CLEAR GRIP 

Peel-and-stick Clear Grip 

traction! UV protection for 

your board that replaces 

or enhances wax. Each 

translucent piece is 10-1/2” by 18” by 1/16" thick 

and weighs only 1 ounce. The Clear Grip formula 

features a skin-friendly texture that provides 

excellent water-wet traction with or without wax. 

Stickier when wet. Clear Grip resists heat from sun 

exposure to keep deck cool and comfortable, while 

also preventing wax from melting. 

54-9104 4-pack (suggested for 6' board) $34.00 

54-9106 6-pack (suggested for 7' board) $51.00 

DA KINE SHOCK PAD 

Da Kine's one-piece Shock Pad features a 

10mm center arch and steep 24mm rolled 

tail kick. 

32-1363 $39.00 

D

HANDLES & HEELSTRAPS LEASHES & IMPACT VESTS 

DA KINE KITE BOARD HANDLE 

Da Kine's ultra-lightweight 

yet unbreakable kite 

handle has 

a rigid 

profile for 

maximum 

control. Weighs only 1.3 oz. with a hole spacing 

range of 5-1/2 to 7 inches. 

32-1266 $10.00 

SLINGSHOT GRAB HANDLE 

Slingshot’s aluminum grab handle features a 

high knuckle clearance, EVA foam padding and 

stainless hardware. 6” to 6.75” hole spacing. 

54-6406 $14.95 

NSI GRAB HANDLE 

The NSI grab handle 

comes with 

side wings to 

accommodate 

a 5.5” 

to 8.75” 

insert spacing. Just match to your board, mark, 

drill and cut off excess. Padded with 1/4” ground 

foam for comfort and grip. Made of durable 

plastic, this handle won’t bend or tweak like 

handles that come with boards. Each. 

54-9022 $18.95 

DA KINE RAPTOR 

HEELSTRAP 

The Raptor heelstrap 

features a 

padded cover for maximum comfort and superior 

strength elastic and webbing construction for 

durability. The lightweight design has multiple 

size adjustments and its unique shape stays out 

of the way when not in use. Pair. 

32-1333 $20.00 

LIQUID FORCE HEELSTRAPS 

Liquid Force’s heel straps give the ultimate 

lock-down. An aggressive grip prevents them 

from coming off when doing power moves and 

the straps can be adjusted for the amount of hold 

that you want. Tuck them away when you don’t 

want to use them. Pair. 

54-9502 $12.95 

HEAVY DUTY REEL LEASH 

Want to keep your leash out of the way? The Reel Leash stores your 

leash neatly spooled in a plastic housing which attaches to 

your harness. The housing 

has been reinforced 

with a stainless steel 

eye bolt to resist strong 

angular pulls. The leash 

strap is replaceable. The 

Reel Leash comes equipped 

with a clip and board attachment 

strap. The optional belt is similar to a diving 

weight belt and is comfortable and strong enough to withstand powerful 

pulls, yet is quickly releasable. 

54-9011 Reel Leash $69.95 

54-9014 Optional Belt Only Size Medium 28"-32" $11.95 CLOSEOUT 

54-9013 Strap Replacement $8.95 

54-9012 Board Connection Assembly $10.95 

PKS EJECTOR SIDE-RELEASE LEASH 

The PKS Ejector leash is fully 

releasable under load and 

has removable EZ clips on 

each end. Durable highstrength 

webbing eliminates 

material breakdown found in 

neoprene leashes. Almost identical to Slingshot leashes at half the price. 

54-4407 $35.95 

CABRINHA BYPASS LEASH 

Cabrinha's leash has a back-up release for ease of 

use and safety. Extends from 3 to 4.5 feet 

and features a spreader bar attachment 

loop, stainless steal security clip, 

and a unique and easy pullaway 

quick release. Compatible 

with almost all kites. 

54-2219 $40.00 

NSI PROKITE LEASHES 

NSI's bungee-style kite leash features a new, more comfortable, heavy duty, wider 1” bungee. It also has 

a thicker, stronger bungee interior design that keeps the bungee from extending beyond its maximum 

length and stretching out prematurely, a common problem with most other leashes. Available in 3 

lengths with looped ends to accept a clip, stainless steel ring or shackle. All parts are sold separately so 

you can create your own configuration. 

See page 73 for hardware 

selection. 

54-9067 3' $11.95 

54-9068 4' $15.95 

54-9069 5' $19.95 

FINS 

LITEWAVE FINS 

Litewave fins have a thin profile for very low drag 

coefficient. The ramp profile lets the fin grip, yet 

feel loose when you push the tail. Three-hole 

pattern works with any board. Set includes four 

2” fins and 8 screws. 

54-9643 $59.00 

CRIMINAL FINS 

Four G10 2” fins feature a two-hole pattern 1.5” 

apart. Hardware included. 

54-4420 $56.00 

Although impact vests provide protection 

for impacts and some added flotation when 

learning, they are not USCG-approved life vests. 

DA KINE MATRIX VEST 

With a lightweight,lowprofile 

design 

for maximum 

freedom of 

movement, 

the Matrix Vest 

features dual 

density armor 

panels, a Power 

Belt system 

for support 

and closure security, and a zippered front for 

easy on/off. Waist and seat harness compatible. 

Spreader bar and pad are sold separately. 

$140.00 

32-1140 X-Small 

32-1141 Small 


32-1143 Large 

32-1144 X-Large 


LITEWAVE SLAM VEST 

Litewave’s 

rugged 

neoprene/EVA 

construction 

protects ribs 

and chest. Integrator 

loops 

“lock” vest 

and harness 

into one unit. 

The slam vest 

also features 

a built-in 

harness hook 

pad and front 

pocket. For 

easy entry, the vest opens on both sides. Just slip 

it over your head and secure from both sides with 

wide, easy-to-adjust Velcro®. 

$112.00 

54-9601 Small/Medium 

54-9603 Large/X-Large 


Photo courtesy of Airush 

77

KITE EQUIPMENT BAGS 

NSI DECEIVER BAG 

The Deceiver is a functional, 

well designed and welldisguised 

kiteboarding 

travel bag. Designed from 

an actual golf travel bag 

with a few inches added 

and extra padding, the 

Deceiver accommodates boards up 

to 147cm (59") in length, three kites, wetsuits, harness and other accessories. Check out the prominently 

displayed logo...NSI PRO GOLF. Now you can usually just slide that gear right through at check in! Dimensions: 

base end is 13-1/2" X 15"; top end is 11-1/2" x 14"; length is 59". Bag can accommodate a 20" 

wide board, 147cm length. 


54-9181 $149.95 

LITEWAVE 

GOLF CADDY 

TRAVELER 

Constructed of 

rugged red Cordura 

with a fully 

padded exterior, 

the Golf Caddy 

Traveler features polyurethane wheels and skid plate, three grab handles, cinch straps, an interior pouch 

for tools, and ‘Golf Caddy’ graphics. At a roomy 61"x18", the bag fits up to a Lite Wave 145-Freestyle2 

and will carry two boards and two kites comfortably. Airlines will usually allow free check-in if you keep 

it under 50 pounds. 

OVERSIZED SHIPPING RATES MAY APPLY 

54-9631 $139.00 

DA KINE BTS BAG 

Da Kine’s BTS Bag features 

a split-level design for 

multiple compartment 

access. It easily converts 

to two separate 

bags to avoid overweight 

baggage charges. There is 

an exterior ID pocket on both bags. The 140cm bag rolls on heavy duty urethane wheels. 


32-7067 140 x 44 x 28cm $170.00 

CRAZY-FLY BOARD BAG 

CrazyFly’s single kiteboard bag is fully padded 

and lined and has an internal pocket. The 

adjustable shoulder strap has a shoulder 

pad for comfort. OVERSIZED 

SHIPPING RATES MAY APPLY 

$50.00 

54-4500 130cm 

54-4501 140cm 

54-4502 155cm 

DA KINE TACKLE BOX 

Organize your fins and small hardware 

in Da Kine’s convenient Tackle 

Box, with easy-access mesh tool 

pockets, clear hardware pockets, and 

vinyl sleeves to protect and organize 

your fins. 

32-7049 $20.00 

DA KINE SLIDER BAG 

The Slider Bag is 

completely padded 

with 3/8" foam for 

maximum gear protection. 

A zipper that runs 

across the end and past 

the handle offers easy 

access. Grab your board 

and go with the webbing 

carry handle. OVERSIZED SHIPPING RATES MAY APPLY 

32-7050 135 x 44 x 6cm $60.00 

32-7051 155 x 44 x 6cm $60.00 

DA KINE KICKER BAG 

Da Kine’s Kicker Bag has a stealth airline-friendly design and is conveniently expandable to accommodate 

a 25cm range of board sizes. It is soft-sided to minimize bag weight and has an internal padded board 

sleeve. It holds multiple boards and kites, plus other gear. Exterior I.D. pocket. 


32-7060 115-140 x 42 x 22cm $100.00 

32-7061 135-160 x 42 x 22cm $100.00 

DA KINE SX BAG 

The SX Bag has a 

low-profile, highcapacity 

shape 

and protects your 

equipment with 

3/8” foam padding 

and padded 

separate nose and 

tail board protectors. Grab the bag with the heavy duty 

handles and glide it easily on heavy duty urethane wheels. 

A full-length zipper top makes it easy to access your 

equipment. Also features a tool pocket and exterior ID 

pocket. Fits up to a 6-foot surfboard. 


32-7064 185 x 52 x 22cm $160.00 

DA KINE DAYLIGHT SURF BOARD BAG 

The Daylight Surf bag is constructed 

of heat- and water-resistant 

tarpaulin 

material with 

1/4” foam padding 

to cushion 

your board. 

It features a 

wraparound, heavy 

duty, corrosion-proof zipper and a wax/fin pocket. Carry with the handle or the padded shoulder strap 

that has a clever stash pocket. OVERSIZED SHIPPING RATES MAY APPLY 

32-1461 1.83m (6'0") $45.00 

32-1461-66 2.01m (6'6") $48.00 


INSTRUCTIONAL VIDEOS & BOOKS 

KITEBOARDING PROGRESSION– 

BEGINNER 

Professional kiteboarders 

show each step of the 

learning process in a clear, 

concise, and easily replicated 

way. From setting up the 

kite to your first jump, this 

video safely demonstrates easy-to-learn ways 

to master kitesurfing. Subjects include: location 

and conditions; equipment and terminology; kite 

setup; launching and landing; kite flying; body 

dragging; re-launch and self rescue; waterstart; 

riding and staying upwind; change of direction; 

and jumping. You can focus on the sections of 

the over 2-1/2 hours of meticulous instruction 

that you are currently looking to improve upon. 

45-2135 DVD $34.95 


INTERMEDIATE 

This is the ultimate tool 

to guide the intermediate 

kiteboarder to the next level. 

The best instruction around 

for learning back loops, 

front loops, and transitions 

— the core repertoire of the 

mid-level kiter. The pace is slow and repetitive, 

with accurate and effective instruction and 

each move is intricately broken down into three 

stages or “progressions.” Unique presentational 

techniques allow easy learning. 86 minutes 

45-2133 DVD $33.95 


ADVANCED 

Take the next step in your 

Kiteboarding Progression by 

focusing on advanced freestyle 

and freeriding tricks. Any intermediate 

kitesurfer will have 

the opportunity to start slow 

and build to the tricks we all dream of mastering. 

Hooked-in maneuvers include kiteloops, boardoffs, 

and riding blind. Unhooked instruction 

includes kite setup and the basics, popping and 

raileys, S-bends, kiteloops and downloops and 

handlepasses. Filmed in Egypt with British pros 

Lewis Crathern, Neil Hilder and Jo Wilson. 

45-2132 $33.95 


PROFESSIONAL 

Fourth in the Progression 

instructional series from Fat 

Sand, Professional takes the 

focused insight of 3-time 

world champ Aaron Hadlow, 

mixed with the in-depth 

analysis that has become 

the trademark of the Progression series to help 

everyone understand and master the highest 

level of Pro tricks. Each trick is broken down into 

simpler parts, so in the end you get a total of 

24 tricks. Some tricks covered include the Back 

Mobe 7, Front Mobe 5, KGB, Slim Chance, Blind 

Judge 3, S-Mobe, and Kiteloop Handlepasses. 

45-2148 $34.95 

KITESCHOOL 

Complete, up-to-date, 

innovative and safe, 

Kiteschool DVD breaks 

down the different learning 

stages and gives you the 

solutions to make rapid 

progress. With two hours 

of tips and advice and an 

interactive menu, Kite School DVD is currently 

the only method dedicated to kitesurf training 

using the new generation of kites widely used by 

schools and in kiting locations. 

45-2154 DVD $34.95 

ZERO 2 HERO 

REAL Kiteboarding #1: 

Rank beginner to selfsufficient 

rider 

Zero 2 Hero is the perfect 

entry-level video, with 

extended land-based 

training and detailed waterbased 

instruction, including body dragging and 

first boardstarts. Sections include: safety and 

responsibility, wind basics, trainer kite flying, 

4 and 5-line water lesson and a bonus section. 

Over 120 minutes. 

45-2134 DVD $29.95 

EVOLUTION 

REAL Kiteboarding #2: 

First Sessions to Riding 

Upwind 

This DVD is all about helping 

riders progress by improving 

on-the-water riding, with 

valuable and hard-to-find 

instruction on learning techniques, kite control, 

stance and transitions. Evolution is unique in 

that it lays out the most effective way to go 

about learning specific kiteboarding moves and 

techniques. Sections include: first sessions, 

transitions, boardride, stance, riding upwind and 

a bonus section. Helpful graphics and multiple 

angles are used to best demonstrate both proper 

and improper techniques.120 minutes. 

45-2138 DVD $29.95 

SURF 

REAL Kiteboarding #4: Surf 

Based on REAL Kiteboarding's 

highly touted 3-day surf 

camp, this DVD is 100% surf 

kite instructional. The main 

portion of the DVD is divided 

up into three chapters: Surf 

101, Surf Skills, and Surf 

Sessions. There are also some 

massive bonus sections. This DVD will not only 

teach you how to successfully up your level in 

the surf, but will also open your eyes to the true 

worldwide potential of this sport. It is filmed in 

the beautiful British Virgin Islands and runs120 

minutes. 

45-2149 DVD $29.95 

ACTION VIDEOS 

KITE BOOKS & VIDEOS 

KITES METHOD 

This 2006 complete kiteboarding book by John Holzhall uses the Kiteboarding International 

Training Evaluation (KITE) system to cover all the details. KITE method girls take 

riders step by step through the quickest way to learn and the safest way to teach. Rders 

start at the kite without bar or lines and learn how to capture a center of energy, then 

counterbalance it. Instead of progressing to the waterstart, riders learn the revolutionary 

Upwind Board Drag (UBD). The use of the board as a planing surface allows riders to 

travel upwind long before they ever waterstart. In the process, they learn the secrets of 

kite handling. 352 pages with 500 pictures and illustrations. 

45-0302 Book $19.95 CLOSEOUT 

SMACK 

Ben Wilson has developed the skills and knowledge to make him one of the most progressive 

wave kiters in the world, and now he’s ready to take your wave riding to the 

next level with this wave riding instructional DVD. You’ll learn about gear selection, 

safety, the elements, the basics to know before going in the waves, kite positioning, 

and basic and advanced moves (both frontside and backside). This 50-minute-plusbonus 

DVD moves rapidly and never gets boring. 

45-2151 DVD $34.95 

COMING TOGETHER 

The title of this Ben Wilson 

movie is a reference to those 

magic days when you score 

the perfect combination of 

wind and waves. The film 

contains a collection of 

footage of some of the world’s top kitesurfers 

smashing waves and getting barreled in exotic 

locations from every corner of the planet. Coming 

Together features both strapped and unstrapped 

riding and showcases all aspects of the waveriding 

side of kiteboarding. Running time is 35 

minutes, plus heaps of bonuses. 

45-2155 DVD $34.95 

LIFE ETC. 

Explore the perspectives of 

three professional kiteboarders 

who ride around each of 

their own home spots before 

hooking up for a trip down 

the West Coast. This film 

covers every aspect of the 

sport, whether it’s wave riding, freestyle tricks, 

sliders, or things never seen before in the sport of 

kiteboarding. The friends travel the country with 

an eye on traveling and experiencing kiteboarding 

with friends, capturing how much fun the 

sport of kiteboarding is. 

45-2146 DVD $29.95 

FOUR 

Anyone slightly interested in 

cutting edge high-powered 

technical moves is going to 

be blown away by the stuff 

they pull on the 2007 PKRA 

Tour. This DVD is even better 

than the previous year! The highlight of the year 

is Aaron Hadlow’s fourth world title in freestyle 

kiteboarding. An epic wave contest at the end of 

the year in Chile ensures great variety. 

45-2152 DVD $34.95 

LINES 

This video rocks. There is a 

varied cast of characters, none 

of whom is taking himself/ 

herself too seriously. There are 

truly insane waveriding locations, 

and a great flat water 

section in Cape Hatteras. The emphasis is definitely 

on waves, and a mix of strapped, strapless, 

hooked, and unhooked riding are featured. This 

is by far the most progressive and entertaining 

surf footage ever with a nice soundtrack, good 

length (about 1 hour 20 minutes with the bonus 

stuff), and a great soul/surf video feel. 

45-2150 DVD $34.95 

THE UNKNOWN ROAD 

Ben Wilson is regarded as one of 

the most influential wave riders 

in the world. The film is focused 

on his surf-style approach to the 

waves, not comparing it to surfing, 

but showing it as an extension by using the 

kite to whip him in, like a jet ski would a surfer, 

then killing the power of the kite and using the 

power of the wave to ride the wave. The entire 

movie is unstrapped and shot worldwide. 

45-2147 DVD $29.95 

Find our latest selection of instructional videos 

and books at www.murrays.com. 

Sorry, videos may not be returned unless defective. 

Eric Marchand 

Prices & specifications are subject to change www.murrays.com 800-786-7245 KITEBOARDING ACCESSORIES 79

SUP BOARDS, PADDLES & ACCESSORIES 

SAMOA SUP INFLATABLE BOARD 

This big, stable (10’10” x 29” x 4”) board was made 

to travel! Deflated, rolled and packed in its own 

backpack, it weighs less than 30 lbs. complete, 

and you can take it anywhere. It fits in a small 

car and/or can be checked as normal size airline 

baggage. Inflate the SAMOA with included pump in 

about 4 minutes, then you are ready to explore lake 

shores, bays, rivers with the perspective of your full 

height, which gives a much better view and is more 

comfortable than paddling from a sitting position. 

Some folks have fun in Class I, II or even III rivers 

and/or surf small waves. Stand-Up Paddling is great 

exercise for the whole family as it helps to develop 

balance and upper body strength. The soft board is 

safer than hard boards and it is more comfortable to 

paddle in the prone or kneeling positions as may be 

required if conditions get windy or rough. 

CAUTION: Keep board tethered! Wear a leash to 

prevent loss of board in wind or current! 

NOTE: A life jacket may be required anyplace other 

than in swimming or surfing areas. 

Ideal inflation: 8 - 12 psi. (20psi max!), but pressure 

over 4 psi works for all except heavier paddlers. 

Ideal paddler weight: Any weight to 200+ lbs. 

for flat water. Lighter paddlers do better as the 

conditions get rougher. 

62-0201 $695.00* 

*Special: Add a Kona 2-piece paddle #62-0402 for 

only $100 (a $119 value!) 

Specifications: 

• Size inflated: 10’ 10” long x 29” wide in middle x 4” thick 

• Size deflated: Roll to 18+” dia x 30.5” tall 

• Weight (SUP only): 23 lbs. 

SAMOA SUP Board features includes: 

• Fins: Tri-fin configuration. 

Use 1, 2 or 3 fins. (Fins are removable without tools.) 

• Sturdy “D” ring at tail for board leash attachment (For safety reasons, you 

should use leash to prevent board from blowing away if you fall.) 

• Four smaller “D” rings on bow for attaching life jackets and/or other items. 

SUP package includes: 

• Hand pump 2.0 liter. 

• Pack with carry straps. 

• Patch kit with tool to tighten the air valve. (You will need to purchase glue 

at a sporting goods store.) 

DA KINE SUP PADDLE SOCK 

Da Kine's SUP Paddle Sock fits paddles up to 84" (213cm). It is constructed of soft and durable woven 

silver polyester cloth with a drawstring closure and webbing handle. 

32-6679 $30.00 

DA KINE SUP PADDLE BAG 

Fit up to two paddles in Da Kine’s SUP Paddle Bag that adjusts from 70 to 84” (178-213cm). The bag is 

constructed of durable 600D polyester with 1/4” foam padding and a heavy duty, corrosion-proof zipper. 

A detachable, adjustable shoulder strap/handle makes carrying easy. 

32-6676 $35.00 

DA KINE SUP PADDLE COVER 

Protect your paddle’s blade with Da Kine’s durable 600D polyester cover with 

1/4” foam padding and heavy duty, corrosion-proof zipper. 

32-6678 $16.95 

A. KONA SUP PADDLE 2-PIECE HYBRID 82” 

• Maximum length: 82” 

• Weight: 2 lbs, 5.5 oz 

• Shaft: Light, strong, smooth glass/carbon composite. 

• Paddle blade: Strong, flexible plastic composite. (Flex, feel and 

hardness are “forgiving”... “recreational.”) 

• Lower section with paddle blade: 43.5” 

• Upper section with ferrule and unglued “T” handle: 42”* 

*You can cut to suit, then glue on the handle. We will cut and glue 

if you tell us your desired length ($10.00). Recommended Length: 

9”-12” more than your height; usually a little too long or too short is 

not a problem. Once cut, paddle is not returnable unless defective. 

62-0402 $119.00 (add $10 for cut and glue service) 

PEAR GRIP HANDLE 

Fits 1” ID tube of #62-05 aluminum SUP paddle 

and #62-0403 Kona hybrid paddle. 

62-0501 $8.95 

B. SUP ALUMINUM PADDLE 

ONE-PIECE 

Aluminum stand-up paddles are the most 

economical SUP paddles! This paddle 

has a nice aluminum shaft that is strong, 

yet light, and features a comfortable, 

ergonomic “pear” end grip similar to 

those on top-of-the-line paddles. The 

sturdy, 9”x20” plastic paddle blade has a 

12-degree offset for stand-up paddling. 

Choose from overall lengths of 73” to 85” 

as indicated. Please inquire about other 

sizes that may be available. 


$70.00 

62-0573 73" LOA, weighs 2 lb., 2 oz. 

62-0576 76" LOA, weighs 2 lb., 3.5 oz. 

62-0579 79" LOA, weighs 2 lb., 3.5 oz. 



PADDLE BLADE BENT 

SHAFT 

Fits 1” ID tube of #62-05 aluminum 

SUP paddles. The 8” size comes 

standard on 73” paddle; 9” is 

standard on all longer paddles. 

62-0502 8" x 20" long $14.95 

62-0503 9" x 20" long $16.95 

D. WERNER SUP “SPANKER” PADDLE CARBON 85" 

The Werner Spanker was the first SUP (Stand Up Paddle) to combine light, buoyant performance core 

shaft with the powerful 12-degree bent design blade. The Werner shaft is durable carbon construction 

with light swing weight and an oval index for added control. The ABS T-grip is designed for maximum 

blade control and great durability. The Werner Performance Core blade ( 19.5” x 9.25” ) is light and 

buoyant in aerated water for enhanced performance, with tough DynelTM edging for greater durability. 

The light spoon shape at blade tip provides a catch that is smooth and quiet. Dihedral back reduces blade 

flutter for a stable stroke, for more comfort, and less fatigue. 

The 85” 1-pc paddle is sold as a “U-Cut & Glue” product. (T-handle needs to be glued & glue is not 

included). Murrays will cut & finish to your desired length for a nominal fee. Werner’s recommended 

lengths: add 8 in for surf and 10 in for touring over height. Once cut, the paddle cannot be returned 

because customer chose improper length. The 

weight for size 85” straight 1-piece paddle 

D 

is 20 oz. 


62-0002 One-piece 85" $299.00* 

62-0003 Two-piece $329.00* 

*Add $20 for cut and glue service; please 

specify finished length in inches. 

80 STAND-UP PADDLING 800-786-7245 www.murrays.com Prices & specifications are subject to change 

B 

A 

C 

Paddle 

sold separately 

C. KONA PADDLE BAG 

This convenient, economical paddle 

bag is full of features! The 47”-long 

bag holds two Kona paddles. Its 

zipper closure, carry handles and 

shoulder strap make it ideal for 

travel. 

62-0403 $19.95

SUP PADDLE GUARD KIT 

Easy to apply, stick 

and paddle! 

Designed to 

protect 

the 

paddle 

blade 

from damage. 

Will not affect 

the performance of 

the paddle. Kit includes urethane tape, glue and 

instructions. 

62-0600 $24.00 

SUP PRO TECK POWER FLEX 9" FIN 

Power 

Flex 

is a 

Pro Teck 

Fin with a 

medium core 

flex. The fin bends 

on turns and then 

springs back, 

creating forward 

thrust similar 

to a swim fin. The medium flex core and flexible 

trailing edge makes the board turn smooth and 

fluid, with continuous speed. Power Flex Fins are 

recommended for intermediate to professional 

surfers. 

62-0609 $56.00 

MONSTER PAINT CLEAR TRACTION 

Clean, clear traction that lasts! 

This is the ultimate spray-on clear 

traction with lasting durability. 

Use on SUP boards and paddle 

shafts, surfboards, windsurfers, 

kiteboards, skimboards and 

skateboards. One spray can will 

coat two boards and two paddles. 

Allow 18 hours to cure completely. 

Sorry, air shipment is not available 

for this item. 

40-2101 $18.00 

DA KINE SUP TRACTION PAD 

Lightweight, grooved EVA foam gives the best grip and shock absorption. The pre-cut two-piece pad 

measures 24.5” x 89” (62cm x 226cm) and can easily trimmed for customization. 

32-6677 $110.00 

HYDRO-TURF 

Hydro-Turf with 2-way, machine-cut grooves (waffle pattern) 

is 3/16" thick and offers the best traction. Apply with contact 

cement. Comes as 36" x 50" sheet; half (18" x 50") and quarter 

sheets (9" x 50") are also available at a proportional price. 

41-2991BK Black $65.00 

41-2991BL Blue $65.00 

41-2991GR Grey $65.00 


30-2020 1" Bristle Brush $1.00 

DA KINE KAINUI 

12' LEASH 

WITH CUFF 

Da Kine’s 12’ leash 

has a maximum 

strength 5/16” 

urethane cord with 

precision molded fittings 

and double brass swivels. It also features a 

quick-release 2” cuff, triple-wrap rail saver and a 

key pocket in the cuff. Pull the easy-release leash 

release pin for quick release in an emergency. 

32-1268 $32.50 

SUP RAIL TAPE KIT 

A clear, tough protective grip tape for the rails 

of SUP boards to protect rails from nicks and 

scratches. Provides excellent grip for the rails. Kit 

includes two 3”X72” clear rail tapes, nose guard 

primer, and easy-to-follow instructions. 

62-0601 $40.00 

EZ-PLUG HANDLE 

Easily install a handle where you want it 

on an SUP or other fiberglass marine craft. 

Its peel and stick back makes the handle 

quick and easy to apply with no tools or 

drilling required. Great for curved and flat 

fiberglass surfaces. The handle features 

a durable weather-proof rubber handle 

and webbing with strong nylon cord that 

is knotted for easy removal of handle. 

Includes one black E-Z plug handle that 

holds up to 60 pounds. The flat handle is 

firm and lays flat on surface. The contour 

handle is soft, comfortable and easy to grip. 

62-0621 Flat $24.00 

62-0622 Contoured $24.00 

QUICK FIX RUBBERIZED DING 

REPAIR KIT 

Perfect for soft foam boards, leash plug 

applications and small repairs! Rubberized Quick 

Fix is a very strong, flexible adhesive sealant that 

is designed to repair and seal tears and dings 

on body boards, fins, wet suits, and traction 

pads. Kit includes tube of Rubberized Quick 

Fix, wooden applicator, sandpaper, sticker and 

easy-to-follow instructions in a recloseable 

plastic bag. 

62-0603 Kit with 2-oz. Tube $9.00 

62-0602 Kit with .5-oz. Tube $4.00 

SUP ACCESSORIES 

DA KINE SUP BOARD BAG 

Da Kine’s SUP board bag is constructed with a durable white tarpaulin top, a heat-reflective tarpaulin 

bottom, and 3/8” foam padding to provide maximum protection. The heavy duty, corrosion-proof, 

wraparound zipper with internal protection makes it easy to get your board in and out of the bag. Also 

features sidewall cinch straps, padded handle, 

padded removable shoulder strap with stash 

pocket, and a wax pocket. 


32-6675-10 10' 4" $180.00 

32-6675-11 11' 0" $190.00 

32-6675-12 12' 3" $200.00 

DVD: STAND UP PADDLE SURFING– 

HAWAIIAN STYLE, VOL. 1 

You can master the sport 

of stand up paddle surfing 

with Hawaii’s top riders. This 

how-to DVD will take you all 

the way from the basics to 

riding your first waves, with 

tons of action in-between. 60 

minutes. 

45-2111 $24.95 

DVD: STAND UP PADDLE SURFING– 

HAWAIIAN STYLE, VOL. 2 

Strap in and get ready to 

master the art of Stand-Up 

Paddle Surfing! Premier 

Productions, producers of 

award-winning videos (Rave, 

Speed IQ, Boost, Liquid 

Thunder, Crazy Days) present 

part 2 in the action-packed 

“how-to” instructional series from the shores of 

Hawaii. Get ready as the world’s top watermen 

take you step-by-step from basic wave riding 

techniques to advanced maneuvers. Plus pro 

tips, racing techniques, exotic travel and tons of 

insane action in-between. DVD extras include: 

Making Of, additional action segments and tons 

more. 65 minutes. 

45-2112 $24.95 

Barz Sport Goggles ............................ pg 6 

Boots ............................................................12 

Dryshirts & Wetsuits .........................10-11 

Gloves ..........................................................13 

Hats & Caps ................................................12 

Maintenance .......................................16-17 

Prices & specifications are subject to change www.murrays.com 800-786-7245 STAND-UP PADDLING 

Photo courtesy of Cloud 9 Toys 

81

INDEX 

A 

Access Ports ......................... 42 

Adapter, Boom RDM ............ 67 

Adhesive .............................. 68 

Sealant ........................... 16 

Airush 

Knotless Ball ................... 73 

Sheeting Systems .......... 72 

Altimeter Bracket & Cover ..... 3 

Aluminum Hiking Sticks ...... 35 

Anchor .................................. 18 

Anti-Pitchpole Hydrofoils .... 36 

Aquapacs ........................... 4, 5 

Aquaseal ................................ 7 

Arriba Hiking Sticks .............. 35 

Assembly Manuals, Cat ....... 43 

Aussie 

Jib Halyard ..................... 23 

Main Halyard Rings ........ 30 

B 

Bags 

Kite Equipment .............. 78 

Mast, Cat ........................ 59 

Mast, Windsurf .............. 64 

Port ................................. 42 

Righting .......................... 36 

Sail & Boom ................... 59 

Ball-End Connectors ............ 46 

Ball-Lok Pins ........................ 31 

Ball 

Airush Knotless ............. 73 

Cork Grip ......................... 35 

Rope End Stop ................ 30 

Barrel Beads ................... 30, 73 

Barz ® Optics ........................ 6, 7 

Base Cup ............................... 68 

Base Pads 

Catamaran ...................... 28 

Windsurfing ................... 63 

Bases, Contoured ................. 28 

Batten 

Caps, Catamaran ............ 39 

Hinge Set ........................ 39 

Tensioners ...................... 39 

Battens, Catamaran ............. 38 

Beach Wheels ...................... 57 

Bearings, Mast Step ............. 27 

Big Cat Righting System ...... 37 

Black Max Wind Indicator ... 19 

Black Mesh Trampolines ...... 34 

Bladders & Repair ................ 74 

Blocks ................................... 25 

Bullet ........................ 25, 48 

Air ................................... 25 

Back-to-Back Ronstan ... 48 

Carbo Air ........................ 73 

Cheek, ............................. 25 

Fiddle .............................. 25 

Harken ..........20, 21, 24, 25 

Harken Pivoting ............. 29 

Hexaratchet .................... 24 

Kite ................................. 73 

Mainsheet ................ 20, 21 

Micro ........................ 25, 48 

Ratchet ........................... 24 

Smart Ratchet ................ 24 

Triple, Streamlined ........ 66 

Board Bags 

Kite ................................. 78 

SUP ................................. 81 

Windsurfing ................... 64 

Board Stackers, Bonez ......... 65 

Boat Covers .......................... 58 

Bobs, Baby & Mama ............ 36 

Bolts ..................................... 14 

Bonez Board Stackers .......... 65 

Books 

Cat & Dinghy .................. 43 

Kite Instructional ............ 78 

Windsurfing ................... 60 

Boom 

Adapter, RDM ................ 67 

Bras ................................. 63 

Cleat, Clamcleat ............. 68 

Head, Strap-On .............. 67 

Streamlined .................... 67 

Boots .................................... 12 

Box, Chinook Strong ............ 68 

Bracket, Motor ..................... 56 

Bridle Vanes ......................... 19 

Bridles ............................ 50, 51 

Buckles 

Catamaran ...................... 46 

Fastex ............................. 46 

Bullet Block .................... 25, 48 

Bullseye Fairlead, Holt Allen 73 

Bungee Cord ........................ 15 

C 

Cable Cutter ......................... 53 

Cam 

Cleat, Spinlock ................ 21 

Kits, Rudder ................... 32 

-Matic Cleats .................. 29 

Can’t Hurt 

Ball-End Connectors ...... 46 

Trapeze Rings ................. 48 

Can’t Miss 

Ball-End Connectors ...... 46 

Trapeze Rings ................. 48 

Cap 

Nacra Crossbar End ........ 48 

Neoprene ........................ 12 

Carabiner Hook .................... 30 

Carbine Hook, Plastic ........... 30 

Carbo 

Air Blocks ........................ 73 

Block, Ratchamatic ........ 24 

Blocks, 29mm ................ 25 

Blocks, 40mm ................ 25 

Blocks, Mainsheet .... 20, 21 

Castings, Mast Base ............. 27 

Cat 

Bags ............................... 42 

Shackle Tool ............. 26, 30 

Trax ................................. 57 

Centerboards ........................ 33 

Channel Inserts .............. 14, 69 

Cheata Motor Bracket .......... 56 

Cheek Blocks ........................ 25 

Chicken Loops ...................... 72 

Cinch Rings .......................... 14 

Clamcleat ® 

Boom Cleat ..................... 68 

Rope Cleats ..................... 29 

With Roller ..................... 48 

Cleats .................................... 29 

Kite Trim ......................... 73 

Leech Line ...................... 39 

Quick-Six Downhaul ...... 66 

Ronstan .......................... 29 

Clevis Pins ..................... 27, 31 

Comp Tip Covers .................. 59 

Compass ................................. 4 

Contact Cement .......35, 63, 68 

Contoured Ports ................... 42 

Control Bars, Kite ................. 72 

Convenience Items, Cat ....... 30 

Cordage ................................ 15 

Cork Ball Grip Kit .................. 35 

Cotter Pin ............................. 31 

Countdown Timer Watches .. 4 

Course Sticker ...................... 19 

Covers 

Boat ................................ 58 

Comp Tip ........................ 59 

Daggerboard .................. 59 

Rudder ............................ 59 

Shroud Adjuster ............. 53 

Snap-On Wire ................ 53 

Snorkel Jib ...................... 59 

Wire ................................ 53 

Cradles, Mast ....................... 54 

Hull ................................. 55 

Crossbar 

End Cap, Nacra ............... 48 

Prindle ............................ 33 

C-Skins ................................. 10 

Custom Rigging ................... 52 

Cutter, Cable ........................ 53 

Cutting Tool, Rope ............... 15 

D 

Da Kine 

Base Pad, Windsurf ........ 63 

Board Bags, Kite ............. 78 

Board Bags, Windsurf .... 64 

Board Bags, SUP ............. 81 

Boom Bras ...................... 63 

Duffle Bags ..................... 65 

Foot Beds, Kite ............... 76 

Footstraps, Windsurf ..... 62 

Footstraps, Kite .............. 76 

Gloves ............................. 13 

Harness Lines, Windsurf 62 

Hats ................................ 12 

Hook Knife ................ 70, 75 

Kingpin Spreader ..... 61, 71 

Kite Harnesses .......... 70-71 

Kite Equipment Bags ..... 78 

Kite Handle & Leashes ... 77 

Mast Bags, Windsurf ...... 64 

Mast Pads ....................... 63 

Matrix Vest ..................... 78 

Quiver Bags .................... 64 

Rack Pads ....................... 65 

Raptor Heel Strap ........... 77 

Sailing Harnesses ........... 47 

Solo Bag ......................... 65 

SUP Items ................. 80-81 

Twist Control System ..... 63 

Uphauls .......................... 68 

Windsurf Harnesses . 60-61 

Dacron Spun Braid ............... 15 

Daggerboards ...................... 33 

Covers ............................. 59 

Deceiver Kite Bag ................. 77 

Deck 

Box .................................. 68 

Ports ............................... 42 

Detent Pins ..................... 31, 35 

Diamond Wires .................... 52 

Digital Sail Numbers ............ 17 

Ding All Epoxy Stik ............... 16 

Dogbone .............................. 48 

Dolphin Striker ..................... 41 

Downhaul 

Cheek Block .................... 25 

Cleat, Quick-Six .............. 66 

Cleats .............................. 29 

Kits, Cat .......................... 26 

Tools, Windsurf .............. 69 

Downhauls 

Catamaran ...................... 26 

Windsurfing ................... 69 

Drain Plugs ........................... 27 

Drums, Roller Furling ........... 41 

Dry Gloves ............................ 13 

Dry Seals & Socks .................. 7 

Dry Suits ................................. 8 

Dryshirt ................................. 10 

Duffle Bags ........................... 65 

DVDs 

Cat & Dinghy .................. 43 

Kiteboarding .................. 79 

Stand-up Paddling ........ 81 

Windsurfing ................... 60 

Dyneema Line ................ 15, 75 

E 

Easy Rigg .............................. 69 

Easy Uphaul ......................... 68 

Electric Motors ..................... 56 

End Cap, Nacra Crossbar ...... 48 

Epoxy .................................... 16 

Euro Pin, Streamlined .......... 66 

Extensions, Streamlined ...... 66 

Eyes, Marine ......................... 53 

EZ Step Mast Raiser ............. 54 

F 

Fabric Guard ......................... 58 

Fairleads ............................... 28 

Kit ................................... 73 

Straps ............................. 28 

For Cam-Matics ............. 29 

Fasteners ........................ 14, 31 

Port ................................. 42 

Fastex Buckles ...................... 46 

Fastfind PLB ......................... 18 

Fiberglass 

Battens ........................... 38 

Cleaners & Polishes ........ 17 

Stain Remover ................ 17 

Fiddle Blocks ........................ 25 

Fins 

Kiteboard ........................ 77 

SUP ................................. 81 

Fleece ..................................... 9 

Fogzero .................................. 3 

Folding Anchor .................... 18 

Foot Pads, Kite ..................... 76 

Footstrap 

Inserts ............................. 63 

Kit, Catamaran ............... 35 

Kiteboard ........................ 76 

SUP ................................. 81 

Windsurfing ................... 62 

Forestays ........................ 50, 51 

Forks, Marine ....................... 53 

Freedom Harnesses, Cat ...... 45 

G 

Gath Headgear ................... 2, 3 

Gedi Convertible .................... 2 

Gloves ................................... 13 

Goggles .................................. 6 

Gooseneck Parts ................... 26 

GPS ......................................... 4 

Grab Handles ....................... 77 

Grip Kit 

Catamaran ...................... 35 

Kiteboard ........................ 76 

SUP ................................. 81 

Ground Stake ....................... 74 

Gul 

Boots .............................. 12 

Dry Suits & Tops ............... 8 

Gloves ............................. 13 

Harnesses, Cat & Dinghy 47 

Gul 

Knee Pads ....................... 12 

Wetsuits ................... 10, 11 

H 

Halyard 

Grip Kit ........................... 30 

Hook ............................... 53 

Rings ............................... 30 

Shackles ......................... 30 

Wire ................................ 52 

Hammerhead Spreaders ...... 71 

Hand 

Riveter ............................ 14 

Swager ........................... 53 

Winch ............................. 54 

Handles 

Kite ................................. 77 

Trapeze ........................... 48 

Harken 

Air Blocks ........................ 25 

Blocks ............................. 25 

Bullet Blocks ................... 25 

Cam-Matic Cleats .......... 29 

Carbo Air Blocks ............. 73 

Mainsheet Blocks ..... 20, 21 

Pivoting Blocks ............... 29 

RigTune Pro .................... 53 

Harness 

Fitting Tips, Cat .............. 44 

Lines, Kite ....................... 72 

Lines, Windsurfing ......... 62 

Selection Tips, Cat .......... 45 

Harnesses 

Kite Boarding ........... 70, 71 

Murrays Cat .............. 44, 45 

Windsurfing ............. 60, 61 

Hawaiian Righting System .. 37 

Hear-Me Rescue Whistle ... 18 

Heel Straps ........................... 77 

Helmets .............................. 2, 3 

Hex Nuts ............................... 14 

Hexaratchet Blocks ........ 23, 24 

Hiking Sticks ......................... 35 

Hiking Strap 

Covers ............................. 35 

Webbing ........................ 34 

Hog Rings ............................. 14 

Hollow Braid ........................ 15 

Hook 

Knife ......................... 71, 75 

Carabiner ........................ 30 

Main Halyard .................. 53 

Plastic Carbine ................ 30 

Roller .............................. 69 

Stainless ......................... 53 

Hoop, Snuffer ....................... 41 

Hull 

Maintenance .................. 17 

Cradles ............................ 55 

Hullkote Polish ..................... 17 

Hydraulic Swaged 

Shrouds .................... 50, 51 

Hydrofoils, Anti-Pitchpole ... 36 

Hydro-Turf ...............35, 63, 81 

I 

Impact Vests ........................ 77 

Inflatable 

PFD ................................. 18 

Stand-up Paddle Board . 80 

Inserts, Channel ............. 14, 69 

Instruments ............................ 4 

J 

Jib Halyards .................... 23, 52 

Block ............................... 25 

Rope ............................... 30 

Jib Track ............................... 23 

Jib Traveler 

Cars ................................. 23 

Controls .......................... 22 

Jibs ....................................... 40 

Joint, Universal .................... 68 

K 

Key-Ball Connectors ............ 46 

Key-Hole Buckle ................... 46 

Kids' Wetsuits ...................... 10 

Kingpin Spreader ........... 61, 71 

Kisme 

Kleets .............................. 32 

OK ................................... 23 

Kite 

Block, Ronstan ............... 73 

Equipment Bags ............. 78 

Lines ............................... 75 

Repair Tape .................... 74 

Trim Cleat ....................... 73 

Trainer ............................ 74 

Knee Pads ............................. 12 

Knife 

Floating .......................... 18 

Hook ......................... 70, 75 

Knotless Ball ......................... 73 

Kona 

SUP Board ......... see Samoa 

Paddle ............................ 80 

L 

Lacing Kits, Trampoline ....... 34 

Ladder Rax Storage .............. 65 

Leading Edge Bladders ........ 74 

Leashes 

Kite ................................. 77 

SUP ................................. 81 

Leech 

Caps ................................ 39 

Line Cleat ........................ 39 

Life Vests .............................. 18 

Lights, Navigation ................ 18 

Line ....................................... 15 

Catcher ........................... 35 

Kite ................................. 75 

Liquid Rope Whipping ... 15, 39 

Long John ...................... 10, 11 

Loop Slides & Stops ............. 23 

Lubricant .............................. 17 

Luff Caps .............................. 39 

M 

Main Sails ............................. 40 

Main Travelers ..................... 22 

Mainsheet Blocks ........... 20, 21 

Maintenance ........................ 16 

Hull & Sail ....................... 17 

Marine Eyes & Forks ............ 53 

Marine-Tex .......................... 16 

Mast Bags, Windsurfing ...... 64 

82 INDEX 800-786-7245 www.murrays.com Prices & specifications are subject to change

Mast 

Base Assembly ............... 27 

Chips ............................... 27 

Cleat Kits ........................ 29 

Extensions ...................... 66 

Floats .............................. 36 

Pads, Da Kine ................. 63 

Protector ......................... 68 

Rotation Control Arms ... 27 

Step Parts ....................... 27 

Steppers ......................... 54 

Supports ......................... 54 

Tang ............................... 41 

Windsurfing ................... 67 

Matrix Vest, Da Kine ............ 77 

Maxi Rigg ............................. 16 

McLube Products ................. 17 

Mesh Tramps ....................... 34 

Micro Blocks ......................... 25 

MiraZyme ............................... 7 

Mirror, Rescue ...................... 18 

Motor Bracket, Cheata ......... 56 

Murrays Harnesses, Cat . 44, 45 

Mylar Sail Repair Tape ......... 17 

N 

Nacra Crossbar End Cap ....... 48 

Nappy Harness, Murrays ..... 45 

Navigation Light Set ............ 18 

Neoprene 

Cap, Hoods ..................... 12 

Gloves ............................. 13 

Repair ............................... 7 

Nicropress Ovals ................... 53 

Nitrous Shorts, Da Kine .. 61, 70 

NoLimitz Masts .................... 67 

Non-Skid Tape ..................... 35 

NSI 

Deceiver Bag .................. 77 

Footstrap, Kite ................ 76 

Leashes ........................... 77 

Numbers, Sail ....................... 17 

Nuts ...................................... 14 

O 

Odor Eliminator ...................... 7 

OK, Kisme ............................. 23 

One Drop Bearing Lube ......... 7 

O-Rings, Port ........................ 42 

Outhaul 

Cleats, Catamaran .......... 29 

Pulley .............................. 68 

Adjustable, Windsurf ..... 68 

Owners’ Manuals, Cat .......... 43 

Oxen Blocks .......................... 24 

P 

Paddle 

Covers, SUP .................... 80 

SUP ................................. 80 

Telescopic ....................... 18 

Pads 

Foot ................................ 76 

Mast ............................... 63 

Spreader Bar ................... 71 

Parts Lists, Cat ...................... 43 

Personal Flotation Devices ... 18 

Personal Locator Beacon ..... 18 

Pigtails .................................. 75 

Pin, Shroud .......................... 53 

Pins 

& Rings Kits .................... 27 

Ball-Lok .......................... 31 

Clevis .............................. 31 

Cotter .............................. 31 

Rudder ............................ 32 

Safety ............................. 31 

Toggle ............................ 31 

Pivmatic Kick-Up, Nacra ...... 33 

Pivoting Blocks ..................... 29 

Plexus Plastic Cleaner ...... 3, 17 

Pocket Protector .................. 39 

Polish, Hull ........................... 17 

Ports ..................................... 42 

Pouches ................................ 58 

Power 

Grip ................................. 69 

Pole Righting System ..... 37 

Power 

Clip Spreader Bar Pad .... 71 

Prescription Goggles .............. 6 

Pressure Gauge .................... 74 

Prindle 

Rudder Parts ................... 33 

Traveler .......................... 22 

Pro Harness, Gul ................... 47 

Progrip ................................. 68 

Protectant, 303 ................ 7, 17 

Prowik Shirts ........................ 10 

Pumps, Kite .......................... 74 

Q 

Q-Powerlines ....................... 75 

Quick 

Release Hook, Cat .......... 46 

Release Pins ............. 31, 35 

Release Shackles ...... 21, 30 

Lock, Streamlined .......... 66 

Quiver Bags .......................... 64 

R 

Race Harnesses, Cat ............. 44 

Racing 

Mark ............................... 19 

Videos, Cat ..................... 43 

Rack Pads, Da Kine ............... 65 

Rail Kit, SUP .......................... 80 

Rash Guards ......................... 10 

Ratchet Blocks ...................... 24 

RDM Extensions ................... 66 

Re-Dek Traction System 35, 63 

Reel Leash ............................ 77 

Regatta ................................ 19 

Releases, Kiteboarding ........ 72 

Repair, Kite/Sail ................... 74 

Retainers .............................. 31 

Rescue Products ................... 18 

Rig Tension Gauges ............. 53 

Rigging 

Accessories & Hardware 53 

Pouch ............................. 58 

Tape ................................ 53 

Tools ......................... 16, 69 

Righting ......................... 36, 37 

Ring 

Stainless ................... 53, 73 

Split ................................ 31 

Stainless & Nylon ........... 53 

Trapeze ........................... 48 

Rivets .................................... 14 

Casings ........................... 14 

Tool ................................. 14 

Windsurfing ................... 68 

Robline ................................. 15 

Roller 

Fairleads ......................... 28 

Furling Jib Hardware ..... 41 

Furling Jibs ..................... 40 

Hooks ............................. 69 

Spreader Bars, Windsurf 61 

Ronstan 

Back-to-Back Blocks ...... 48 

Boots .............................. 12 

Cam Cleats ..................... 29 

Cleats .............................. 29 

Eye & Eye Swivel ...... 41, 73 

Gloves ............................. 13 

Micro Blocks ................... 25 

Watches ........................... 4 

Rope ..................................... 15 

Cleats .............................. 29 

Cutting Tool .................... 15 

End Stops ....................... 30 

Lock ................................ 48 

Splicing Kit ..................... 15 

Rudders ................................ 33 

Alignment, Hobie .......... 32 

Alignment, Nacra ........... 33 

Cam Kits, Hobie .............. 32 

Components ............. 32, 33 

Conversion Kit, H-18 ...... 32 

Covers ............................. 59 

Gudgeons ....................... 32 

Kits, Nacra & Prindle ...... 33 

Pins ................................. 32 

Return Kits, Hobie .......... 32 

Stiffening Kit ............ 32, 33 

Tite Bushings .................. 32 

Tite Kit ............................ 32 

Rules Card ............................ 19 

S 

Safety ................................... 18 

Pin .................................. 31 

Products ......................... 18 

Whistle ........................... 18 

Sail 

& Boom Bags ................. 59 

Accessories ..................... 39 

Cleaner ........................... 17 

Feeder ............................. 39 

Hank, Jib ......................... 39 

Numbers ......................... 17 

Repair Tape .................... 17 

SailKote by McLube ............. 17 

Sails, Catamaran/Dinghy ..... 40 

Samoa Inflatable SUP Board 80 

Sand Bag .............................. 74 

Screw-In Ports ..................... 42 

Screws .................................. 14 

Sealant ................................. 16 

Seals for Dry Suits .................. 7 

Seat Harnesses, Kite ............. 71 

See-Me Rescue Lights ....... 18 

Shackles ......................... 30, 31 

Halyard ........................... 30 

Quick Release .....21, 30, 73 

Tools ......................... 26, 30 

Trigger Snap .................. 73 

Sheaves ................................ 28 

Sheeting, Kite 

Accessories ..................... 73 

Straps & Systems ........... 72 

Shock Cord ........................ 15 

Lacing Kit, Trampoline ... 34 

Pliers ............................... 14 

Trapeze ........................... 49 

Shorty Wetsuits ............. 10, 11 

Shrouds .......................... 50, 51 

Adjusters & Covers ......... 53 

Anchor Components ...... 53 

Tensioner/De-Tensioner 53 

Side Stays ....................... 50, 51 

Signal 

Mirror ............................. 18 

Sticker ............................. 19 

Silicone Pump ........................ 7 

Sister Clips ............................ 30 

Skeg Saver ............................ 69 

Slam Vests ............................ 77 

Slippers ................................ 12 

Slug, Tramp .......................... 34 

Smocks ................................... 8 

Snap Shackles ..........30, 31, 73 

Snap, Fast Eye ...................... 73 

Snorkel Jib Covers ................ 59 

Snuffer System, Mid-Pole ... 41 

Sock, Snuffer ........................ 41 

Solo Bag, Da Kine ................. 65 

Spares & Repair Kits ............. 27 

Spectra-Lite ......................... 15 

Speedometer ......................... 4 

Spinlock 

Cam Cleats ............... 21, 29 

Pivoting Block ................ 29 

Spinnaker Poles ................... 41 

Splicing Kit ........................... 15 

Split Rings ............................ 31 

Spooled Rope ....................... 15 

Sport Goggles ........................ 6 

Spray Suits ............................. 9 

Spreader 

Bar Pads ......................... 71 

Covers ............................. 39 

Spreaders 

Catamaran/Dinghy ........ 46 

Kite Boarding ................. 71 

Windsurfing ................... 61 

Spring Clip ............................ 31 

Springs for Blocks ................ 23 

Sta/Master Turnbuckle ........ 53 

Stain Remover ...................... 17 

Stainless Fasteners ............... 14 

Standing Rigging ........... 50, 51 

Stand-Up Paddling ........ 80-81 

Stake .................................... 74 

Steamer Wetsuits ................ 11 

Steppers, Mast ..................... 54 

Sticker 

Signal ............................. 19 

Course ............................ 19 

Streamlined Window .... 67 

Stohlquist 

Dry Suits ........................... 8 

Life Vests ........................ 18 

Wetsuits ................... 10, 11 

Stop Sleeves ......................... 53 

Storage 

LadderRax ...................... 65 

Locker ............................. 54 

On-Tramp ...................... 58 

Strap Control ........................ 63 

Strap-on Boom Head ........... 67 

Streamlined 

Booms ............................ 67 

Universals ....................... 66 

Stretch Righting System ...... 37 

Strobes ................................. 18 

Strut Bladders ...................... 74 

Sunfish Sails ......................... 40 

Super Goose ......................... 26 

Supports, Mast ..................... 54 

Surefire Spreader Bar ........... 71 

Surefoot EVA Grip Kit ........... 35 

Surf Convertible Helmets ... 2, 3 

Suunto Compass .................... 4 

Survival Products ................. 18 

Swage-It Kit & Tool ............. 53 

Swager, Hand ...................... 53 

Swim Goggles ........................ 7 

Swivel 

Cleats & Bases ................ 28 

For Harken Blocks .......... 21 

Swivel 

Roller Furling .................. 41 

Ronstan Eye & Eye ... 41, 73 

With Roller Fairlead ....... 23 

T 

303 Protectant ..................... 17 

3M Maintenance Products .. 17 

Tack/Clew Kits ..................... 39 

Tape 

Rigging ........................... 53 

Sail Repair ................ 17, 74 

Tear-Aid Kite Repair Kits 17, 74 

Tell-Tales ........................ 17, 19 

Telo-Cat Bridle Vane ............ 19 

Tendon Joint ........................ 66 

Tension Gauges .................... 53 

Tensioner/De-Tensioner ..... 53 

Tensioners, Batten ............... 39 

Thimbles .............................. 53 

Tie-Downs 

Cat .................................. 55 

Garb ................................ 65 

Tiger Trax ............................. 57 

Tillers .................................... 35 

Connection, Hobie ......... 32 

Tie Bar Upgrade, Nacra .. 33 

Toggle 

Pins ........................... 30, 31 

Strap ......................... 55, 65 

Tools 

All-Purpose .............. 26, 30 

Aluminum Rigging ........ 16 

Cat Key Shackle ........ 26, 30 

Downhaul ....................... 69 . 

Easy Rigg .................. 16, 69 

Hand Swager ................. 53 

Maxi Rigg ....................... 16 

Multi-Tool by Ronstan ... 16 

Rope Cutting Gun ........... 15 

Shackle ..................... 26, 30 

Torque Driver ................. 16 

Uptight Tramp ............... 34 

Torqeedo .............................. 56 

Torque Driver ....................... 16 

Track, Jib .............................. 23 

Tracker Cars .......................... 22 

Tracker Traveler Kit .............. 22 

Traction 

Catamaran ...................... 35 

SUP ................................. 81 

Windsurfing ................... 63 

Trailer Box ............................ 54 

Trainer Kites ......................... 74 

Tramp 

Clamp ............................. 34 

Pack ................................ 58 

Tool, Uptight .................. 34 

Trampolines ......................... 34 

Accessories ............... 34, 35 

Trapeze 

Accessories ..................... 48 

Adjustment Kits ............. 49 

Assemblies ..................... 52 

Prices & specifications are subject to change www.murrays.com 800-786-7245 INDEX 

INDEX 

Handles .......................... 48 

Harnesses ...........44, 45, 47 

Rings ............................... 48 

Shock Cords .................... 49 

Wires .............................. 52 

Travel Bags, Da Kine ............ 65 

Traveler Cars ......................... 22 

Travelers, Main & Jib ........... 22 

Tren Tec Batten Caps ........... 39 

Triple Block, Streamlined ..... 66 

Turnbuckles .......................... 53 

Twist Control System ........... 63 

Twist-On System 

Streamlined .................... 66 

U 

Ultimate Harness, Gul .......... 47 

Undersuits .............................. 9 

Universal Righting System .. 37 

Universals ............................ 68 

Universals, Streamlined ....... 66 

Uphauls ................................ 68 

U-Stick Bladder System ....... 74 

V 

Valves, Kite ........................... 74 

Vanes, Wind ......................... 19 

V-Cleats ................................ 29 

Videos 

Cat & Dinghy .................. 43 

Kite ................................. 79 

Stand-up Paddling ........ 81 

Windsurfing ................... 60 

Vinyl Cleaner .................. 17, 34 

Visors for Gath ................... 2, 3 

W 

Wai Wai Base Pad ................ 63 

Waist Harnesses, Kite .......... 70 

Washers ............................... 14 

Watches ................................. 4 

Water Blocker Socks ............ 12 

Waterproof Cases ............... 4, 5 

Wax, Hull .............................. 17 

Webbing, Hiking Strap ........ 34 

West System Repair Packs .. 16 

Wetsuits ......................... 10, 11 

Care .................................. 7 

Kids’ ................................ 10 

Shampoo .......................... 7 

Wheels, Beach ..................... 57 

Whipping Twine .................. 15 

Whistle ................................. 18 

Win Tails ........................ 17, 19 

Winch, Hand ........................ 54 

Wind 

Indicators ................... 4, 19 

Tops .................................. 8 

Windex Vane ....................... 19 

Windmeters ........................... 4 

Windsurfing 

Books .............................. 60 

Harnesses ................. 60, 61 

Videos ............................. 60 

Wire ...................................... 53 

Jib Halyards .................... 52 

Main Halyards ................ 52 

Trapeze ........................... 52 

X-Y-Z 

Yacht Braid ........................... 15 

Yoke Assembly .................... 35 

Zipper Care ............................. 7 

Zippered Pouches ................ 58 

83

6389 Rose Lane, Suite B 

Carpinteria, CA 93013 USA 

Phone 800-786-7245 • 805-684-8393 

Monday-Friday 8:00am to 5:00pm Pacific Time 

www.murrays.com • info@murrays.com 

Fax 800-733-8224 • 805-684-8966 

Accessories for 

Beach Catamarans 

Windsurfing 

Kiteboarding 

Stand-up Paddling 

Cross-Sport

catamaran accessories - Columbus Sailing Club

Create successful ePaper yourself

Delete template?

Save as template?